mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
8bde7f776c
- remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
1691 lines
46 KiB
C
1691 lines
46 KiB
C
/*
|
|
* Broadcom BCM570x Ethernet Driver for U-Boot.
|
|
* Support 5701, 5702, 5703, and 5704. Single instance driver.
|
|
* Copyright (C) 2002 James F. Dougherty (jfd@broadcom.com)
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_NET) && (!defined(CONFIG_NET_MULTI)) && \
|
|
defined(CONFIG_BCM570x)
|
|
|
|
#ifdef CONFIG_BMW
|
|
#include <mpc824x.h>
|
|
#endif
|
|
#include <net.h>
|
|
#include "bcm570x_mm.h"
|
|
#include "bcm570x_autoneg.h"
|
|
#include <pci.h>
|
|
#include <malloc.h>
|
|
|
|
|
|
/*
|
|
* PCI Registers and definitions.
|
|
*/
|
|
#define PCI_CMD_MASK 0xffff0000 /* mask to save status bits */
|
|
#define PCI_ANY_ID (~0)
|
|
|
|
/*
|
|
* PCI memory base for Ethernet device as well as device Interrupt.
|
|
*/
|
|
#define BCM570X_MBAR 0x80100000
|
|
#define BCM570X_ILINE 1
|
|
|
|
|
|
#define SECOND_USEC 1000000
|
|
#define MAX_PACKET_SIZE 1600
|
|
#define MAX_UNITS 4
|
|
|
|
/* Globals to this module */
|
|
int initialized = 0;
|
|
unsigned int ioBase = 0;
|
|
volatile PLM_DEVICE_BLOCK pDevice = NULL; /* 570x softc */
|
|
volatile PUM_DEVICE_BLOCK pUmDevice = NULL;
|
|
|
|
/* Used to pass the full-duplex flag, etc. */
|
|
int line_speed[MAX_UNITS] = {0,0,0,0};
|
|
static int full_duplex[MAX_UNITS] = {1,1,1,1};
|
|
static int rx_flow_control[MAX_UNITS] = {0,0,0,0};
|
|
static int tx_flow_control[MAX_UNITS] = {0,0,0,0};
|
|
static int auto_flow_control[MAX_UNITS] = {0,0,0,0};
|
|
static int tx_checksum[MAX_UNITS] = {1,1,1,1};
|
|
static int rx_checksum[MAX_UNITS] = {1,1,1,1};
|
|
static int auto_speed[MAX_UNITS] = {1,1,1,1};
|
|
|
|
#if JUMBO_FRAMES
|
|
/* Jumbo MTU for interfaces. */
|
|
static int mtu[MAX_UNITS] = {0,0,0,0};
|
|
#endif
|
|
|
|
/* Turn on Wake-on lan for a device unit */
|
|
static int enable_wol[MAX_UNITS] = {0,0,0,0};
|
|
|
|
#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT
|
|
static unsigned int tx_pkt_desc_cnt[MAX_UNITS] =
|
|
{TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT, TX_DESC_CNT};
|
|
|
|
#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT
|
|
static unsigned int rx_std_desc_cnt[MAX_UNITS] =
|
|
{RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT};
|
|
|
|
static unsigned int rx_adaptive_coalesce[MAX_UNITS] = {1,1,1,1};
|
|
|
|
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
|
|
#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT
|
|
static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] =
|
|
{JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT};
|
|
#endif
|
|
#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS
|
|
static unsigned int rx_coalesce_ticks[MAX_UNITS] =
|
|
{RX_COAL_TK, RX_COAL_TK, RX_COAL_TK, RX_COAL_TK};
|
|
|
|
#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES
|
|
static unsigned int rx_max_coalesce_frames[MAX_UNITS] =
|
|
{RX_COAL_FM, RX_COAL_FM, RX_COAL_FM, RX_COAL_FM};
|
|
|
|
#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS
|
|
static unsigned int tx_coalesce_ticks[MAX_UNITS] =
|
|
{TX_COAL_TK, TX_COAL_TK, TX_COAL_TK, TX_COAL_TK};
|
|
|
|
#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES
|
|
static unsigned int tx_max_coalesce_frames[MAX_UNITS] =
|
|
{TX_COAL_FM, TX_COAL_FM, TX_COAL_FM, TX_COAL_FM};
|
|
|
|
#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS
|
|
static unsigned int stats_coalesce_ticks[MAX_UNITS] =
|
|
{ST_COAL_TK, ST_COAL_TK, ST_COAL_TK, ST_COAL_TK};
|
|
|
|
|
|
/*
|
|
* Legitimate values for BCM570x device types
|
|
*/
|
|
typedef enum {
|
|
BCM5700VIGIL = 0,
|
|
BCM5700A6,
|
|
BCM5700T6,
|
|
BCM5700A9,
|
|
BCM5700T9,
|
|
BCM5700,
|
|
BCM5701A5,
|
|
BCM5701T1,
|
|
BCM5701T8,
|
|
BCM5701A7,
|
|
BCM5701A10,
|
|
BCM5701A12,
|
|
BCM5701,
|
|
BCM5702,
|
|
BCM5703,
|
|
BCM5703A31,
|
|
TC996T,
|
|
TC996ST,
|
|
TC996SSX,
|
|
TC996SX,
|
|
TC996BT,
|
|
TC997T,
|
|
TC997SX,
|
|
TC1000T,
|
|
TC940BR01,
|
|
TC942BR01,
|
|
NC6770,
|
|
NC7760,
|
|
NC7770,
|
|
NC7780
|
|
} board_t;
|
|
|
|
/* Chip-Rev names for each device-type */
|
|
static struct {
|
|
char* name;
|
|
} chip_rev[] = {
|
|
{"BCM5700VIGIL"},
|
|
{"BCM5700A6"},
|
|
{"BCM5700T6"},
|
|
{"BCM5700A9"},
|
|
{"BCM5700T9"},
|
|
{"BCM5700"},
|
|
{"BCM5701A5"},
|
|
{"BCM5701T1"},
|
|
{"BCM5701T8"},
|
|
{"BCM5701A7"},
|
|
{"BCM5701A10"},
|
|
{"BCM5701A12"},
|
|
{"BCM5701"},
|
|
{"BCM5702"},
|
|
{"BCM5703"},
|
|
{"BCM5703A31"},
|
|
{"TC996T"},
|
|
{"TC996ST"},
|
|
{"TC996SSX"},
|
|
{"TC996SX"},
|
|
{"TC996BT"},
|
|
{"TC997T"},
|
|
{"TC997SX"},
|
|
{"TC1000T"},
|
|
{"TC940BR01"},
|
|
{"TC942BR01"},
|
|
{"NC6770"},
|
|
{"NC7760"},
|
|
{"NC7770"},
|
|
{"NC7780"},
|
|
{0}
|
|
};
|
|
|
|
|
|
/* indexed by board_t, above */
|
|
static struct {
|
|
char *name;
|
|
} board_info[] = {
|
|
{ "Broadcom Vigil B5700 1000Base-T" },
|
|
{ "Broadcom BCM5700 1000Base-T" },
|
|
{ "Broadcom BCM5700 1000Base-SX" },
|
|
{ "Broadcom BCM5700 1000Base-SX" },
|
|
{ "Broadcom BCM5700 1000Base-T" },
|
|
{ "Broadcom BCM5700" },
|
|
{ "Broadcom BCM5701 1000Base-T" },
|
|
{ "Broadcom BCM5701 1000Base-T" },
|
|
{ "Broadcom BCM5701 1000Base-T" },
|
|
{ "Broadcom BCM5701 1000Base-SX" },
|
|
{ "Broadcom BCM5701 1000Base-T" },
|
|
{ "Broadcom BCM5701 1000Base-T" },
|
|
{ "Broadcom BCM5701" },
|
|
{ "Broadcom BCM5702 1000Base-T" },
|
|
{ "Broadcom BCM5703 1000Base-T" },
|
|
{ "Broadcom BCM5703 1000Base-SX" },
|
|
{ "3Com 3C996 10/100/1000 Server NIC" },
|
|
{ "3Com 3C996 10/100/1000 Server NIC" },
|
|
{ "3Com 3C996 Gigabit Fiber-SX Server NIC" },
|
|
{ "3Com 3C996 Gigabit Fiber-SX Server NIC" },
|
|
{ "3Com 3C996B Gigabit Server NIC" },
|
|
{ "3Com 3C997 Gigabit Server NIC" },
|
|
{ "3Com 3C997 Gigabit Fiber-SX Server NIC" },
|
|
{ "3Com 3C1000 Gigabit NIC" },
|
|
{ "3Com 3C940 Gigabit LOM (21X21)" },
|
|
{ "3Com 3C942 Gigabit LOM (31X31)" },
|
|
{ "Compaq NC6770 Gigabit Server Adapter" },
|
|
{ "Compaq NC7760 Gigabit Server Adapter" },
|
|
{ "Compaq NC7770 Gigabit Server Adapter" },
|
|
{ "Compaq NC7780 Gigabit Server Adapter" },
|
|
{ 0 },
|
|
};
|
|
|
|
/* PCI Devices which use the 570x chipset */
|
|
struct pci_device_table {
|
|
unsigned short vendor_id, device_id; /* Vendor/DeviceID */
|
|
unsigned short subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
|
|
unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
|
|
unsigned long board_id; /* Data private to the driver */
|
|
int io_size, min_latency;
|
|
} bcm570xDevices[] = {
|
|
{0x14e4, 0x1644, 0x1014, 0x0277, 0, 0, BCM5700VIGIL ,128,32},
|
|
{0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6 ,128,32},
|
|
{0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6 ,128,32},
|
|
{0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9 ,128,32},
|
|
{0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9 ,128,32},
|
|
{0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700 ,128,32},
|
|
{0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700 ,128,32},
|
|
{0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700 ,128,32},
|
|
{0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700 ,128,32},
|
|
{0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T ,128,32},
|
|
{0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST ,128,32},
|
|
{0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX ,128,32},
|
|
{0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T ,128,32},
|
|
{0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX ,128,32},
|
|
{0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01 ,128,32},
|
|
{0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700 ,128,32},
|
|
{0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5 ,128,32},
|
|
{0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1 ,128,32},
|
|
{0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8 ,128,32},
|
|
{0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7 ,128,32},
|
|
{0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10 ,128,32},
|
|
{0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12 ,128,32},
|
|
{0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770 ,128,32},
|
|
{0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770 ,128,32},
|
|
{0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780 ,128,32},
|
|
{0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701 ,128,32},
|
|
{0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX ,128,32},
|
|
{0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT ,128,32},
|
|
{0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T ,128,32},
|
|
{0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01 ,128,32},
|
|
{0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701 ,128,32},
|
|
{0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32},
|
|
{0x14e4, 0x1646, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32},
|
|
{0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32},
|
|
{0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32},
|
|
{0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32},
|
|
{0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32},
|
|
{0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32},
|
|
{0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32},
|
|
{0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32},
|
|
{0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32},
|
|
{0x14e4, 0x1647, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32},
|
|
{0x14e4, 0x1647, 0x0e11, 0x99, 0, 0, NC7780 ,128,32},
|
|
{0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32},
|
|
{0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32},
|
|
{0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32},
|
|
{0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32},
|
|
{0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32},
|
|
{0x14e4, 0x16a7, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32},
|
|
{0x14e4, 0x16a7, 0x0e11, 0x99, 0, 0, NC7780 ,128,32},
|
|
{0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32}
|
|
};
|
|
|
|
#define n570xDevices (sizeof(bcm570xDevices)/sizeof(bcm570xDevices[0]))
|
|
|
|
|
|
/*
|
|
* Allocate a packet buffer from the bcm570x packet pool.
|
|
*/
|
|
void *
|
|
bcm570xPktAlloc(int u, int pksize)
|
|
{
|
|
return malloc(pksize);
|
|
}
|
|
|
|
/*
|
|
* Free a packet previously allocated from the bcm570x packet
|
|
* buffer pool.
|
|
*/
|
|
void
|
|
bcm570xPktFree(int u, void *p)
|
|
{
|
|
free(p);
|
|
}
|
|
|
|
int
|
|
bcm570xReplenishRxBuffers(PUM_DEVICE_BLOCK pUmDevice)
|
|
{
|
|
PLM_PACKET pPacket;
|
|
PUM_PACKET pUmPacket;
|
|
void *skb;
|
|
int queue_rx = 0;
|
|
int ret = 0;
|
|
|
|
while ((pUmPacket = (PUM_PACKET)
|
|
QQ_PopHead(&pUmDevice->rx_out_of_buf_q.Container)) != 0) {
|
|
|
|
pPacket = (PLM_PACKET) pUmPacket;
|
|
|
|
/* reuse an old skb */
|
|
if (pUmPacket->skbuff) {
|
|
QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
|
|
queue_rx = 1;
|
|
continue;
|
|
}
|
|
if ( ( skb = bcm570xPktAlloc(pUmDevice->index,
|
|
pPacket->u.Rx.RxBufferSize + 2)) == 0) {
|
|
QQ_PushHead(&pUmDevice->rx_out_of_buf_q.Container,pPacket);
|
|
printf("NOTICE: Out of RX memory.\n");
|
|
ret = 1;
|
|
break;
|
|
}
|
|
|
|
pUmPacket->skbuff = skb;
|
|
QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
|
|
queue_rx = 1;
|
|
}
|
|
|
|
if (queue_rx) {
|
|
LM_QueueRxPackets(pDevice);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Probe, Map, and Init 570x device.
|
|
*/
|
|
int eth_init(bd_t *bis)
|
|
{
|
|
int i, rv, devFound = FALSE;
|
|
pci_dev_t devbusfn;
|
|
unsigned short status;
|
|
|
|
/* Find PCI device, if it exists, configure ... */
|
|
for( i = 0; i < n570xDevices; i++){
|
|
devbusfn = pci_find_device(bcm570xDevices[i].vendor_id,
|
|
bcm570xDevices[i].device_id, 0);
|
|
if(devbusfn == -1) {
|
|
continue; /* No device of that vendor/device ID */
|
|
} else {
|
|
|
|
/* Set ILINE */
|
|
pci_write_config_byte(devbusfn,
|
|
PCI_INTERRUPT_LINE, BCM570X_ILINE);
|
|
|
|
/*
|
|
* 0x10 - 0x14 define one 64-bit MBAR.
|
|
* 0x14 is the higher-order address bits of the BAR.
|
|
*/
|
|
pci_write_config_dword(devbusfn,
|
|
PCI_BASE_ADDRESS_1, 0);
|
|
|
|
ioBase = BCM570X_MBAR;
|
|
|
|
pci_write_config_dword(devbusfn,
|
|
PCI_BASE_ADDRESS_0, ioBase);
|
|
|
|
/*
|
|
* Enable PCI memory, IO, and Master -- don't
|
|
* reset any status bits in doing so.
|
|
*/
|
|
pci_read_config_word(devbusfn,
|
|
PCI_COMMAND, &status);
|
|
|
|
status |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
|
|
|
|
pci_write_config_word(devbusfn,
|
|
PCI_COMMAND, status);
|
|
|
|
printf("\n%s: bus %d, device %d, function %d: MBAR=0x%x\n",
|
|
board_info[bcm570xDevices[i].board_id].name,
|
|
PCI_BUS(devbusfn),
|
|
PCI_DEV(devbusfn),
|
|
PCI_FUNC(devbusfn),
|
|
ioBase);
|
|
|
|
/* Allocate once, but always clear on init */
|
|
if (!pDevice) {
|
|
pDevice = malloc(sizeof(UM_DEVICE_BLOCK));
|
|
pUmDevice = (PUM_DEVICE_BLOCK)pDevice;
|
|
memset(pDevice, 0x0, sizeof(UM_DEVICE_BLOCK));
|
|
}
|
|
|
|
/* Configure pci dev structure */
|
|
pUmDevice->pdev = devbusfn;
|
|
pUmDevice->index = 0;
|
|
pUmDevice->tx_pkt = 0;
|
|
pUmDevice->rx_pkt = 0;
|
|
devFound = TRUE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if(!devFound){
|
|
printf("eth_init: FAILURE: no BCM570x Ethernet devices found.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Setup defaults for chip */
|
|
pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
|
|
|
|
if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) {
|
|
pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
|
|
} else {
|
|
|
|
if (rx_checksum[i]) {
|
|
pDevice->TaskToOffload |=
|
|
LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
|
|
LM_TASK_OFFLOAD_RX_UDP_CHECKSUM;
|
|
}
|
|
|
|
if (tx_checksum[i]) {
|
|
pDevice->TaskToOffload |=
|
|
LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
|
|
LM_TASK_OFFLOAD_TX_UDP_CHECKSUM;
|
|
pDevice->NoTxPseudoHdrChksum = TRUE;
|
|
}
|
|
}
|
|
|
|
/* Set Device PCI Memory base address */
|
|
pDevice->pMappedMemBase = (PLM_UINT8) ioBase;
|
|
|
|
/* Pull down adapter info */
|
|
if ((rv = LM_GetAdapterInfo(pDevice)) != LM_STATUS_SUCCESS) {
|
|
printf("bcm570xEnd: LM_GetAdapterInfo failed: rv=%d!\n", rv );
|
|
return -2;
|
|
}
|
|
|
|
/* Lock not needed */
|
|
pUmDevice->do_global_lock = 0;
|
|
|
|
if (T3_ASIC_REV(pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) {
|
|
/* The 5700 chip works best without interleaved register */
|
|
/* accesses on certain machines. */
|
|
pUmDevice->do_global_lock = 1;
|
|
}
|
|
|
|
/* Setup timer delays */
|
|
if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) {
|
|
pDevice->UseTaggedStatus = TRUE;
|
|
pUmDevice->timer_interval = CFG_HZ;
|
|
}
|
|
else {
|
|
pUmDevice->timer_interval = CFG_HZ / 50;
|
|
}
|
|
|
|
/* Grab name .... */
|
|
pUmDevice->name =
|
|
(char*)malloc(strlen(board_info[bcm570xDevices[i].board_id].name)+1);
|
|
strcpy(pUmDevice->name,board_info[bcm570xDevices[i].board_id].name);
|
|
|
|
memcpy(pDevice->NodeAddress, bis->bi_enetaddr, 6);
|
|
LM_SetMacAddress(pDevice, bis->bi_enetaddr);
|
|
/* Init queues .. */
|
|
QQ_InitQueue(&pUmDevice->rx_out_of_buf_q.Container,
|
|
MAX_RX_PACKET_DESC_COUNT);
|
|
pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0;
|
|
|
|
/* delay for 4 seconds */
|
|
pUmDevice->delayed_link_ind =
|
|
(4 * CFG_HZ) / pUmDevice->timer_interval;
|
|
|
|
pUmDevice->adaptive_expiry =
|
|
CFG_HZ / pUmDevice->timer_interval;
|
|
|
|
/* Sometimes we get spurious ints. after reset when link is down. */
|
|
/* This field tells the isr to service the int. even if there is */
|
|
/* no status block update. */
|
|
pUmDevice->adapter_just_inited =
|
|
(3 * CFG_HZ) / pUmDevice->timer_interval;
|
|
|
|
/* Initialize 570x */
|
|
if (LM_InitializeAdapter(pDevice) != LM_STATUS_SUCCESS) {
|
|
printf("ERROR: Adapter initialization failed.\n");
|
|
return ERROR;
|
|
}
|
|
|
|
/* Enable chip ISR */
|
|
LM_EnableInterrupt(pDevice);
|
|
|
|
/* Clear MC table */
|
|
LM_MulticastClear(pDevice);
|
|
|
|
/* Enable Multicast */
|
|
LM_SetReceiveMask(pDevice,
|
|
pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST);
|
|
|
|
pUmDevice->opened = 1;
|
|
pUmDevice->tx_full = 0;
|
|
pUmDevice->tx_pkt = 0;
|
|
pUmDevice->rx_pkt = 0;
|
|
printf("eth%d: %s @0x%lx,",
|
|
pDevice->index, pUmDevice->name, (unsigned long)ioBase);
|
|
printf( "node addr ");
|
|
for (i = 0; i < 6; i++) {
|
|
printf("%2.2x", pDevice->NodeAddress[i]);
|
|
}
|
|
printf("\n");
|
|
|
|
printf("eth%d: ", pDevice->index);
|
|
printf("%s with ",
|
|
chip_rev[bcm570xDevices[i].board_id].name);
|
|
|
|
if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID)
|
|
printf("Broadcom BCM5400 Copper ");
|
|
else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
|
|
printf("Broadcom BCM5401 Copper ");
|
|
else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID)
|
|
printf("Broadcom BCM5411 Copper ");
|
|
else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID)
|
|
printf("Broadcom BCM5701 Integrated Copper ");
|
|
else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID)
|
|
printf("Broadcom BCM5703 Integrated Copper ");
|
|
else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID)
|
|
printf("Broadcom BCM8002 SerDes ");
|
|
else if (pDevice->EnableTbi)
|
|
printf("Agilent HDMP-1636 SerDes ");
|
|
else
|
|
printf("Unknown ");
|
|
printf("transceiver found\n");
|
|
|
|
printf("eth%d: %s, MTU: %d,",
|
|
pDevice->index, pDevice->BusSpeedStr, 1500);
|
|
|
|
if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) &&
|
|
rx_checksum[i])
|
|
printf("Rx Checksum ON\n");
|
|
else
|
|
printf("Rx Checksum OFF\n");
|
|
initialized++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ethernet Interrupt service routine */
|
|
void
|
|
eth_isr(void)
|
|
{
|
|
LM_UINT32 oldtag, newtag;
|
|
int i;
|
|
|
|
pUmDevice->interrupt = 1;
|
|
|
|
if (pDevice->UseTaggedStatus) {
|
|
if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) ||
|
|
pUmDevice->adapter_just_inited) {
|
|
MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1);
|
|
oldtag = pDevice->pStatusBlkVirt->StatusTag;
|
|
|
|
for (i = 0; ; i++) {
|
|
pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED;
|
|
LM_ServiceInterrupts(pDevice);
|
|
newtag = pDevice->pStatusBlkVirt->StatusTag;
|
|
if ((newtag == oldtag) || (i > 50)) {
|
|
MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, newtag << 24);
|
|
if (pDevice->UndiFix) {
|
|
REG_WR(pDevice, Grc.LocalCtrl,
|
|
pDevice->GrcLocalCtrl | 0x2);
|
|
}
|
|
break;
|
|
}
|
|
oldtag = newtag;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
while (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) {
|
|
unsigned int dummy;
|
|
|
|
pDevice->pMemView->Mailbox.Interrupt[0].Low = 1;
|
|
pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED;
|
|
LM_ServiceInterrupts(pDevice);
|
|
pDevice->pMemView->Mailbox.Interrupt[0].Low = 0;
|
|
dummy = pDevice->pMemView->Mailbox.Interrupt[0].Low;
|
|
}
|
|
}
|
|
|
|
/* Allocate new RX buffers */
|
|
if (QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container)) {
|
|
bcm570xReplenishRxBuffers(pUmDevice);
|
|
}
|
|
|
|
/* Queue packets */
|
|
if (QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container)) {
|
|
LM_QueueRxPackets(pDevice);
|
|
}
|
|
|
|
if (pUmDevice->tx_queued) {
|
|
pUmDevice->tx_queued = 0;
|
|
}
|
|
|
|
if(pUmDevice->tx_full){
|
|
if(pDevice->LinkStatus != LM_STATUS_LINK_DOWN){
|
|
printf("NOTICE: tx was previously blocked, restarting MUX\n");
|
|
pUmDevice->tx_full = 0;
|
|
}
|
|
}
|
|
|
|
pUmDevice->interrupt = 0;
|
|
|
|
}
|
|
|
|
int
|
|
eth_send(volatile void *packet, int length)
|
|
{
|
|
int status = 0;
|
|
#if ET_DEBUG
|
|
unsigned char* ptr = (unsigned char*)packet;
|
|
#endif
|
|
PLM_PACKET pPacket;
|
|
PUM_PACKET pUmPacket;
|
|
|
|
/* Link down, return */
|
|
while(pDevice->LinkStatus == LM_STATUS_LINK_DOWN) {
|
|
#if 0
|
|
printf("eth%d: link down - check cable or link partner.\n",
|
|
pUmDevice->index);
|
|
#endif
|
|
eth_isr();
|
|
|
|
/* Wait to see link for one-half a second before sending ... */
|
|
udelay(1500000);
|
|
|
|
}
|
|
|
|
/* Clear sent flag */
|
|
pUmDevice->tx_pkt = 0;
|
|
|
|
/* Previously blocked */
|
|
if(pUmDevice->tx_full){
|
|
printf("eth%d: tx blocked.\n", pUmDevice->index);
|
|
return 0;
|
|
}
|
|
|
|
pPacket = (PLM_PACKET)
|
|
QQ_PopHead(&pDevice->TxPacketFreeQ.Container);
|
|
|
|
if (pPacket == 0) {
|
|
pUmDevice->tx_full = 1;
|
|
printf("bcm570xEndSend: TX full!\n");
|
|
return 0;
|
|
}
|
|
|
|
if (pDevice->SendBdLeft.counter == 0) {
|
|
pUmDevice->tx_full = 1;
|
|
printf("bcm570xEndSend: no more TX descriptors!\n");
|
|
QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
|
|
return 0;
|
|
}
|
|
|
|
if (length <= 0){
|
|
printf("eth: bad packet size: %d\n", length);
|
|
goto out;
|
|
}
|
|
|
|
/* Get packet buffers and fragment list */
|
|
pUmPacket = (PUM_PACKET) pPacket;
|
|
/* Single DMA Descriptor transmit.
|
|
* Fragments may be provided, but one DMA descriptor max is
|
|
* used to send the packet.
|
|
*/
|
|
if (MM_CoalesceTxBuffer (pDevice, pPacket) != LM_STATUS_SUCCESS) {
|
|
if (pUmPacket->skbuff == NULL){
|
|
/* Packet was discarded */
|
|
printf("TX: failed (1)\n");
|
|
status = 1;
|
|
} else{
|
|
printf("TX: failed (2)\n");
|
|
status = 2;
|
|
}
|
|
QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
|
|
return status;
|
|
}
|
|
|
|
/* Copy packet to DMA buffer */
|
|
memset(pUmPacket->skbuff, 0x0, MAX_PACKET_SIZE);
|
|
memcpy((void*)pUmPacket->skbuff, (void*)packet, length);
|
|
pPacket->PacketSize = length;
|
|
pPacket->Flags |= SND_BD_FLAG_END|SND_BD_FLAG_COAL_NOW;
|
|
pPacket->u.Tx.FragCount = 1;
|
|
/* We've already provided a frame ready for transmission */
|
|
pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM;
|
|
|
|
if ( LM_SendPacket(pDevice, pPacket) == LM_STATUS_FAILURE){
|
|
/*
|
|
* A lower level send failure will push the packet descriptor back
|
|
* in the free queue, so just deal with the VxWorks clusters.
|
|
*/
|
|
if (pUmPacket->skbuff == NULL){
|
|
printf("TX failed (1)!\n");
|
|
/* Packet was discarded */
|
|
status = 3;
|
|
} else {
|
|
/* A resource problem ... */
|
|
printf("TX failed (2)!\n");
|
|
status = 4;
|
|
}
|
|
|
|
if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) == 0) {
|
|
printf("TX: emptyQ!\n");
|
|
pUmDevice->tx_full = 1;
|
|
}
|
|
}
|
|
|
|
while(pUmDevice->tx_pkt == 0){
|
|
/* Service TX */
|
|
eth_isr();
|
|
}
|
|
#if ET_DEBUG
|
|
printf("eth_send: 0x%x, %d bytes\n"
|
|
"[%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x] ...\n",
|
|
(int)pPacket, length,
|
|
ptr[0],ptr[1],ptr[2],ptr[3],ptr[4],ptr[5],
|
|
ptr[6],ptr[7],ptr[8],ptr[9],ptr[10],ptr[11],ptr[12],
|
|
ptr[13],ptr[14],ptr[15]);
|
|
#endif
|
|
pUmDevice->tx_pkt = 0;
|
|
QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
|
|
|
|
/* Done with send */
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
|
|
/* Ethernet receive */
|
|
int
|
|
eth_rx(void)
|
|
{
|
|
PLM_PACKET pPacket = NULL;
|
|
PUM_PACKET pUmPacket = NULL;
|
|
void *skb;
|
|
int size=0;
|
|
|
|
while(TRUE) {
|
|
|
|
bcm570x_service_isr:
|
|
/* Pull down packet if it is there */
|
|
eth_isr();
|
|
|
|
/* Indicate RX packets called */
|
|
if(pUmDevice->rx_pkt){
|
|
/* printf("eth_rx: got a packet...\n"); */
|
|
pUmDevice->rx_pkt = 0;
|
|
} else {
|
|
/* printf("eth_rx: waiting for packet...\n"); */
|
|
goto bcm570x_service_isr;
|
|
}
|
|
|
|
pPacket = (PLM_PACKET)
|
|
QQ_PopHead(&pDevice->RxPacketReceivedQ.Container);
|
|
|
|
if (pPacket == 0){
|
|
printf("eth_rx: empty packet!\n");
|
|
goto bcm570x_service_isr;
|
|
}
|
|
|
|
pUmPacket = (PUM_PACKET) pPacket;
|
|
#if ET_DEBUG
|
|
printf("eth_rx: packet @0x%x\n",
|
|
(int)pPacket);
|
|
#endif
|
|
/* If the packet generated an error, reuse buffer */
|
|
if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) ||
|
|
((size = pPacket->PacketSize) > pDevice->RxMtu)) {
|
|
|
|
/* reuse skb */
|
|
QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
|
|
printf("eth_rx: error in packet dma!\n");
|
|
goto bcm570x_service_isr;
|
|
}
|
|
|
|
/* Set size and address */
|
|
skb = pUmPacket->skbuff;
|
|
size = pPacket->PacketSize;
|
|
|
|
/* Pass the packet up to the protocol
|
|
* layers.
|
|
*/
|
|
NetReceive(skb, size);
|
|
|
|
/* Free packet buffer */
|
|
bcm570xPktFree (pUmDevice->index, skb);
|
|
pUmPacket->skbuff = NULL;
|
|
|
|
/* Reuse SKB */
|
|
QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
|
|
|
|
return 0; /* Got a packet, bail ... */
|
|
}
|
|
return size;
|
|
}
|
|
|
|
|
|
/* Shut down device */
|
|
void
|
|
eth_halt(void)
|
|
{
|
|
int i;
|
|
if ( initialized)
|
|
if (pDevice && pUmDevice && pUmDevice->opened){
|
|
printf("\neth%d:%s,", pUmDevice->index, pUmDevice->name);
|
|
printf("HALT,");
|
|
/* stop device */
|
|
LM_Halt(pDevice);
|
|
printf("POWER DOWN,");
|
|
LM_SetPowerState(pDevice, LM_POWER_STATE_D3);
|
|
|
|
/* Free the memory allocated by the device in tigon3 */
|
|
for (i = 0; i < pUmDevice->mem_list_num; i++) {
|
|
if (pUmDevice->mem_list[i]) {
|
|
/* sanity check */
|
|
if (pUmDevice->dma_list[i]) { /* cache-safe memory */
|
|
free(pUmDevice->mem_list[i]);
|
|
} else {
|
|
free(pUmDevice->mem_list[i]); /* normal memory */
|
|
}
|
|
}
|
|
}
|
|
pUmDevice->opened = 0;
|
|
free(pDevice);
|
|
pDevice = NULL;
|
|
pUmDevice = NULL;
|
|
initialized = 0;
|
|
printf("done - offline.\n");
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
* Middle Module: Interface between the HW driver (tigon3 modules) and
|
|
* the native (SENS) driver. These routines implement the system
|
|
* interface for tigon3 on VxWorks.
|
|
*/
|
|
|
|
/* Middle module dependency - size of a packet descriptor */
|
|
int MM_Packet_Desc_Size = sizeof(UM_PACKET);
|
|
|
|
|
|
LM_STATUS
|
|
MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice,
|
|
LM_UINT32 Offset,
|
|
LM_UINT32 *pValue32)
|
|
{
|
|
UM_DEVICE_BLOCK *pUmDevice;
|
|
pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
|
|
pci_read_config_dword(pUmDevice->pdev,
|
|
Offset, (u32 *) pValue32);
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
|
|
LM_STATUS
|
|
MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice,
|
|
LM_UINT32 Offset,
|
|
LM_UINT32 Value32)
|
|
{
|
|
UM_DEVICE_BLOCK *pUmDevice;
|
|
pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
|
|
pci_write_config_dword(pUmDevice->pdev,
|
|
Offset, Value32);
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
|
|
LM_STATUS
|
|
MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice,
|
|
LM_UINT32 Offset,
|
|
LM_UINT16 *pValue16)
|
|
{
|
|
UM_DEVICE_BLOCK *pUmDevice;
|
|
pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
|
|
pci_read_config_word(pUmDevice->pdev,
|
|
Offset, (u16*) pValue16);
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
LM_STATUS
|
|
MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice,
|
|
LM_UINT32 Offset,
|
|
LM_UINT16 Value16)
|
|
{
|
|
UM_DEVICE_BLOCK *pUmDevice;
|
|
pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
|
|
pci_write_config_word(pUmDevice->pdev,
|
|
Offset, Value16);
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
|
|
LM_STATUS
|
|
MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
|
|
PLM_VOID *pMemoryBlockVirt,
|
|
PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
|
|
LM_BOOL Cached)
|
|
{
|
|
PLM_VOID pvirt;
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
dma_addr_t mapping;
|
|
|
|
pvirt = malloc(BlockSize);
|
|
mapping = (dma_addr_t)(pvirt);
|
|
if (!pvirt)
|
|
return LM_STATUS_FAILURE;
|
|
|
|
pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
|
|
pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping;
|
|
pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
|
|
memset(pvirt, 0, BlockSize);
|
|
|
|
*pMemoryBlockVirt = (PLM_VOID) pvirt;
|
|
MM_SetAddr (pMemoryBlockPhy, (dma_addr_t) mapping);
|
|
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
|
|
LM_STATUS
|
|
MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
|
|
PLM_VOID *pMemoryBlockVirt)
|
|
{
|
|
PLM_VOID pvirt;
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
|
|
pvirt = malloc(BlockSize);
|
|
|
|
if (!pvirt)
|
|
return LM_STATUS_FAILURE;
|
|
|
|
pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
|
|
pUmDevice->dma_list[pUmDevice->mem_list_num] = 0;
|
|
pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
|
|
memset(pvirt, 0, BlockSize);
|
|
*pMemoryBlockVirt = pvirt;
|
|
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
LM_STATUS
|
|
MM_MapMemBase(PLM_DEVICE_BLOCK pDevice)
|
|
{
|
|
printf("BCM570x PCI Memory base address @0x%x\n",
|
|
(unsigned int)pDevice->pMappedMemBase);
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
LM_STATUS
|
|
MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice)
|
|
{
|
|
int i;
|
|
void* skb;
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
PUM_PACKET pUmPacket = NULL;
|
|
PLM_PACKET pPacket = NULL;
|
|
|
|
for (i = 0; i < pDevice->RxPacketDescCnt; i++) {
|
|
pPacket = QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
|
|
pUmPacket = (PUM_PACKET) pPacket;
|
|
|
|
if (pPacket == 0) {
|
|
printf("MM_InitializeUmPackets: Bad RxPacketFreeQ\n");
|
|
}
|
|
|
|
skb = bcm570xPktAlloc(pUmDevice->index,
|
|
pPacket->u.Rx.RxBufferSize + 2);
|
|
|
|
if (skb == 0) {
|
|
pUmPacket->skbuff = 0;
|
|
QQ_PushTail(&pUmDevice->rx_out_of_buf_q.Container, pPacket);
|
|
printf("MM_InitializeUmPackets: out of buffer.\n");
|
|
continue;
|
|
}
|
|
|
|
pUmPacket->skbuff = skb;
|
|
QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
|
|
}
|
|
|
|
pUmDevice->rx_low_buf_thresh = pDevice->RxPacketDescCnt / 8;
|
|
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
LM_STATUS
|
|
MM_GetConfig(PLM_DEVICE_BLOCK pDevice)
|
|
{
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
int index = pDevice->index;
|
|
|
|
if (auto_speed[index] == 0)
|
|
pDevice->DisableAutoNeg = TRUE;
|
|
else
|
|
pDevice->DisableAutoNeg = FALSE;
|
|
|
|
if (line_speed[index] == 0) {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_AUTO;
|
|
pDevice->DisableAutoNeg = FALSE;
|
|
}
|
|
else {
|
|
if (line_speed[index] == 1000) {
|
|
if (pDevice->EnableTbi) {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX;
|
|
}
|
|
else if (full_duplex[index]) {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX;
|
|
}
|
|
else {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS;
|
|
}
|
|
if (!pDevice->EnableTbi)
|
|
pDevice->DisableAutoNeg = FALSE;
|
|
}
|
|
else if (line_speed[index] == 100) {
|
|
if (full_duplex[index]) {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX;
|
|
}
|
|
else {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS;
|
|
}
|
|
}
|
|
else if (line_speed[index] == 10) {
|
|
if (full_duplex[index]) {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX;
|
|
}
|
|
else {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS;
|
|
}
|
|
}
|
|
else {
|
|
pDevice->RequestedMediaType =
|
|
LM_REQUESTED_MEDIA_TYPE_AUTO;
|
|
pDevice->DisableAutoNeg = FALSE;
|
|
}
|
|
|
|
}
|
|
pDevice->FlowControlCap = 0;
|
|
if (rx_flow_control[index] != 0) {
|
|
pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
|
|
}
|
|
if (tx_flow_control[index] != 0) {
|
|
pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
|
|
}
|
|
if ((auto_flow_control[index] != 0) &&
|
|
(pDevice->DisableAutoNeg == FALSE)) {
|
|
|
|
pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE;
|
|
if ((tx_flow_control[index] == 0) &&
|
|
(rx_flow_control[index] == 0)) {
|
|
pDevice->FlowControlCap |=
|
|
LM_FLOW_CONTROL_TRANSMIT_PAUSE |
|
|
LM_FLOW_CONTROL_RECEIVE_PAUSE;
|
|
}
|
|
}
|
|
|
|
/* Default MTU for now */
|
|
pUmDevice->mtu = 1500;
|
|
|
|
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
|
|
if (pUmDevice->mtu > 1500) {
|
|
pDevice->RxMtu = pUmDevice->mtu;
|
|
pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT;
|
|
}
|
|
else {
|
|
pDevice->RxJumboDescCnt = 0;
|
|
}
|
|
pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index];
|
|
#else
|
|
pDevice->RxMtu = pUmDevice->mtu;
|
|
#endif
|
|
|
|
if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) {
|
|
pDevice->UseTaggedStatus = TRUE;
|
|
pUmDevice->timer_interval = CFG_HZ;
|
|
}
|
|
else {
|
|
pUmDevice->timer_interval = CFG_HZ/50;
|
|
}
|
|
|
|
pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
|
|
pDevice->RxStdDescCnt = rx_std_desc_cnt[index];
|
|
/* Note: adaptive coalescence really isn't adaptive in this driver */
|
|
pUmDevice->rx_adaptive_coalesce = rx_adaptive_coalesce[index];
|
|
if (!pUmDevice->rx_adaptive_coalesce) {
|
|
pDevice->RxCoalescingTicks = rx_coalesce_ticks[index];
|
|
if (pDevice->RxCoalescingTicks > MAX_RX_COALESCING_TICKS)
|
|
pDevice->RxCoalescingTicks = MAX_RX_COALESCING_TICKS;
|
|
pUmDevice->rx_curr_coalesce_ticks =pDevice->RxCoalescingTicks;
|
|
|
|
pDevice->RxMaxCoalescedFrames = rx_max_coalesce_frames[index];
|
|
if (pDevice->RxMaxCoalescedFrames>MAX_RX_MAX_COALESCED_FRAMES)
|
|
pDevice->RxMaxCoalescedFrames =
|
|
MAX_RX_MAX_COALESCED_FRAMES;
|
|
pUmDevice->rx_curr_coalesce_frames =
|
|
pDevice->RxMaxCoalescedFrames;
|
|
pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index];
|
|
if (pDevice->StatsCoalescingTicks>MAX_STATS_COALESCING_TICKS)
|
|
pDevice->StatsCoalescingTicks=
|
|
MAX_STATS_COALESCING_TICKS;
|
|
}
|
|
else {
|
|
pUmDevice->rx_curr_coalesce_frames =
|
|
DEFAULT_RX_MAX_COALESCED_FRAMES;
|
|
pUmDevice->rx_curr_coalesce_ticks =
|
|
DEFAULT_RX_COALESCING_TICKS;
|
|
}
|
|
pDevice->TxCoalescingTicks = tx_coalesce_ticks[index];
|
|
if (pDevice->TxCoalescingTicks > MAX_TX_COALESCING_TICKS)
|
|
pDevice->TxCoalescingTicks = MAX_TX_COALESCING_TICKS;
|
|
pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index];
|
|
if (pDevice->TxMaxCoalescedFrames > MAX_TX_MAX_COALESCED_FRAMES)
|
|
pDevice->TxMaxCoalescedFrames = MAX_TX_MAX_COALESCED_FRAMES;
|
|
|
|
if (enable_wol[index]) {
|
|
pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET;
|
|
pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET;
|
|
}
|
|
pDevice->NicSendBd = TRUE;
|
|
|
|
/* Don't update status blocks during interrupt */
|
|
pDevice->RxCoalescingTicksDuringInt = 0;
|
|
pDevice->TxCoalescingTicksDuringInt = 0;
|
|
|
|
return LM_STATUS_SUCCESS;
|
|
|
|
}
|
|
|
|
|
|
LM_STATUS
|
|
MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
|
|
{
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
printf("Start TX DMA: dev=%d packet @0x%x\n",
|
|
(int)pUmDevice->index, (unsigned int)pPacket);
|
|
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
LM_STATUS
|
|
MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
|
|
{
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
printf("Complete TX DMA: dev=%d packet @0x%x\n",
|
|
(int)pUmDevice->index, (unsigned int)pPacket);
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
|
|
LM_STATUS
|
|
MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status)
|
|
{
|
|
char buf[128];
|
|
char lcd[4];
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
LM_FLOW_CONTROL flow_control;
|
|
|
|
pUmDevice->delayed_link_ind = 0;
|
|
memset(lcd, 0x0, 4);
|
|
|
|
if (Status == LM_STATUS_LINK_DOWN) {
|
|
sprintf(buf,"eth%d: %s: NIC Link is down\n",
|
|
pUmDevice->index,pUmDevice->name);
|
|
lcd[0] = 'L';lcd[1]='N';lcd[2]='K';lcd[3] = '?';
|
|
} else if (Status == LM_STATUS_LINK_ACTIVE) {
|
|
sprintf(buf,"eth%d:%s: ", pUmDevice->index, pUmDevice->name);
|
|
|
|
if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS){
|
|
strcat(buf,"1000 Mbps ");
|
|
lcd[0] = '1';lcd[1]='G';lcd[2]='B';
|
|
} else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS){
|
|
strcat(buf,"100 Mbps ");
|
|
lcd[0] = '1';lcd[1]='0';lcd[2]='0';
|
|
} else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS){
|
|
strcat(buf,"10 Mbps ");
|
|
lcd[0] = '1';lcd[1]='0';lcd[2]=' ';
|
|
}
|
|
if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL){
|
|
strcat(buf, "full duplex");
|
|
lcd[3] = 'F';
|
|
} else {
|
|
strcat(buf, "half duplex");
|
|
lcd[3] = 'H';
|
|
}
|
|
strcat(buf, " link up");
|
|
|
|
flow_control = pDevice->FlowControl &
|
|
(LM_FLOW_CONTROL_RECEIVE_PAUSE |
|
|
LM_FLOW_CONTROL_TRANSMIT_PAUSE);
|
|
|
|
if (flow_control) {
|
|
if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) {
|
|
strcat(buf,", receive ");
|
|
if (flow_control & LM_FLOW_CONTROL_TRANSMIT_PAUSE)
|
|
strcat(buf," & transmit ");
|
|
}
|
|
else {
|
|
strcat(buf,", transmit ");
|
|
}
|
|
strcat(buf,"flow control ON");
|
|
} else {
|
|
strcat(buf, ", flow control OFF");
|
|
}
|
|
strcat(buf,"\n");
|
|
printf("%s",buf);
|
|
}
|
|
#if 0
|
|
sysLedDsply(lcd[0],lcd[1],lcd[2],lcd[3]);
|
|
#endif
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
LM_STATUS
|
|
MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
|
|
{
|
|
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
PUM_PACKET pUmPacket;
|
|
void *skb;
|
|
|
|
pUmPacket = (PUM_PACKET) pPacket;
|
|
|
|
if ((skb = pUmPacket->skbuff))
|
|
bcm570xPktFree(pUmDevice->index, skb);
|
|
|
|
pUmPacket->skbuff = 0;
|
|
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
unsigned long
|
|
MM_AnGetCurrentTime_us(PAN_STATE_INFO pAnInfo)
|
|
{
|
|
return get_timer(0);
|
|
}
|
|
|
|
/*
|
|
* Transform an MBUF chain into a single MBUF.
|
|
* This routine will fail if the amount of data in the
|
|
* chain overflows a transmit buffer. In that case,
|
|
* the incoming MBUF chain will be freed. This routine can
|
|
* also fail by not being able to allocate a new MBUF (including
|
|
* cluster and mbuf headers). In that case the failure is
|
|
* non-fatal. The incoming cluster chain is not freed, giving
|
|
* the caller the choice of whether to try a retransmit later.
|
|
*/
|
|
LM_STATUS
|
|
MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
|
|
{
|
|
PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
void *skbnew;
|
|
int len = 0;
|
|
|
|
if (len == 0)
|
|
return (LM_STATUS_SUCCESS);
|
|
|
|
if (len > MAX_PACKET_SIZE){
|
|
printf ("eth%d: xmit frame discarded, too big!, size = %d\n",
|
|
pUmDevice->index, len);
|
|
return (LM_STATUS_FAILURE);
|
|
}
|
|
|
|
skbnew = bcm570xPktAlloc(pUmDevice->index, MAX_PACKET_SIZE);
|
|
|
|
if (skbnew == NULL) {
|
|
pUmDevice->tx_full = 1;
|
|
printf ("eth%d: out of transmit buffers", pUmDevice->index);
|
|
return (LM_STATUS_FAILURE);
|
|
}
|
|
|
|
/* New packet values */
|
|
pUmPacket->skbuff = skbnew;
|
|
pUmPacket->lm_packet.u.Tx.FragCount = 1;
|
|
|
|
return (LM_STATUS_SUCCESS);
|
|
}
|
|
|
|
|
|
LM_STATUS
|
|
MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice)
|
|
{
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
pUmDevice->rx_pkt = 1;
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
LM_STATUS
|
|
MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice)
|
|
{
|
|
PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
|
|
PLM_PACKET pPacket;
|
|
PUM_PACKET pUmPacket;
|
|
void *skb;
|
|
while ( TRUE ) {
|
|
|
|
pPacket = (PLM_PACKET)
|
|
QQ_PopHead(&pDevice->TxPacketXmittedQ.Container);
|
|
|
|
if (pPacket == 0)
|
|
break;
|
|
|
|
pUmPacket = (PUM_PACKET) pPacket;
|
|
skb = (void*)pUmPacket->skbuff;
|
|
|
|
/*
|
|
* Free MBLK if we transmitted a fragmented packet or a
|
|
* non-fragmented packet straight from the VxWorks
|
|
* buffer pool. If packet was copied to a local transmit
|
|
* buffer, then there's no MBUF to free, just free
|
|
* the transmit buffer back to the cluster pool.
|
|
*/
|
|
|
|
if (skb)
|
|
bcm570xPktFree (pUmDevice->index, skb);
|
|
|
|
pUmPacket->skbuff = 0;
|
|
QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket);
|
|
pUmDevice->tx_pkt = 1;
|
|
}
|
|
if (pUmDevice->tx_full) {
|
|
if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) >=
|
|
(QQ_GetSize(&pDevice->TxPacketFreeQ.Container) >> 1))
|
|
pUmDevice->tx_full = 0;
|
|
}
|
|
return LM_STATUS_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Scan an MBUF chain until we reach fragment number "frag"
|
|
* Return its length and physical address.
|
|
*/
|
|
void MM_MapTxDma
|
|
(
|
|
PLM_DEVICE_BLOCK pDevice,
|
|
struct _LM_PACKET *pPacket,
|
|
T3_64BIT_HOST_ADDR *paddr,
|
|
LM_UINT32 *len,
|
|
int frag)
|
|
{
|
|
PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
|
|
*len = pPacket->PacketSize;
|
|
MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff);
|
|
}
|
|
|
|
/*
|
|
* Convert an mbuf address, a CPU local virtual address,
|
|
* to a physical address as seen from a PCI device. Store the
|
|
* result at paddr.
|
|
*/
|
|
void MM_MapRxDma(
|
|
PLM_DEVICE_BLOCK pDevice,
|
|
struct _LM_PACKET *pPacket,
|
|
T3_64BIT_HOST_ADDR *paddr)
|
|
{
|
|
PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
|
|
MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff);
|
|
}
|
|
|
|
void
|
|
MM_SetAddr (LM_PHYSICAL_ADDRESS *paddr, dma_addr_t addr)
|
|
{
|
|
#if (BITS_PER_LONG == 64)
|
|
paddr->High = ((unsigned long) addr) >> 32;
|
|
paddr->Low = ((unsigned long) addr) & 0xffffffff;
|
|
#else
|
|
paddr->High = 0;
|
|
paddr->Low = (unsigned long) addr;
|
|
#endif
|
|
}
|
|
|
|
void
|
|
MM_SetT3Addr(T3_64BIT_HOST_ADDR *paddr, dma_addr_t addr)
|
|
{
|
|
unsigned long baddr = (unsigned long) addr;
|
|
#if (BITS_PER_LONG == 64)
|
|
set_64bit_addr(paddr, baddr & 0xffffffff, baddr >> 32);
|
|
#else
|
|
set_64bit_addr(paddr, baddr, 0);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* This combination of `inline' and `extern' has almost the effect of a
|
|
* macro. The way to use it is to put a function definition in a header
|
|
* file with these keywords, and put another copy of the definition
|
|
* (lacking `inline' and `extern') in a library file. The definition in
|
|
* the header file will cause most calls to the function to be inlined.
|
|
* If any uses of the function remain, they will refer to the single copy
|
|
* in the library.
|
|
*/
|
|
void
|
|
atomic_set(atomic_t* entry, int val)
|
|
{
|
|
entry->counter = val;
|
|
}
|
|
int
|
|
atomic_read(atomic_t* entry)
|
|
{
|
|
return entry->counter;
|
|
}
|
|
void
|
|
atomic_inc(atomic_t* entry)
|
|
{
|
|
if(entry)
|
|
entry->counter++;
|
|
}
|
|
|
|
void
|
|
atomic_dec(atomic_t* entry)
|
|
{
|
|
if(entry)
|
|
entry->counter--;
|
|
}
|
|
|
|
void
|
|
atomic_sub(int a, atomic_t* entry)
|
|
{
|
|
if(entry)
|
|
entry->counter -= a;
|
|
}
|
|
|
|
void
|
|
atomic_add(int a, atomic_t* entry)
|
|
{
|
|
if(entry)
|
|
entry->counter += a;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
void
|
|
QQ_InitQueue(
|
|
PQQ_CONTAINER pQueue,
|
|
unsigned int QueueSize) {
|
|
pQueue->Head = 0;
|
|
pQueue->Tail = 0;
|
|
pQueue->Size = QueueSize+1;
|
|
atomic_set(&pQueue->EntryCnt, 0);
|
|
} /* QQ_InitQueue */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
char
|
|
QQ_Full(
|
|
PQQ_CONTAINER pQueue) {
|
|
unsigned int NewHead;
|
|
|
|
NewHead = (pQueue->Head + 1) % pQueue->Size;
|
|
|
|
return(NewHead == pQueue->Tail);
|
|
} /* QQ_Full */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
char
|
|
QQ_Empty(
|
|
PQQ_CONTAINER pQueue) {
|
|
return(pQueue->Head == pQueue->Tail);
|
|
} /* QQ_Empty */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
unsigned int
|
|
QQ_GetSize(
|
|
PQQ_CONTAINER pQueue) {
|
|
return pQueue->Size;
|
|
} /* QQ_GetSize */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
unsigned int
|
|
QQ_GetEntryCnt(
|
|
PQQ_CONTAINER pQueue) {
|
|
return atomic_read(&pQueue->EntryCnt);
|
|
} /* QQ_GetEntryCnt */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/* TRUE entry was added successfully. */
|
|
/* FALSE queue is full. */
|
|
/******************************************************************************/
|
|
char
|
|
QQ_PushHead(
|
|
PQQ_CONTAINER pQueue,
|
|
PQQ_ENTRY pEntry) {
|
|
unsigned int Head;
|
|
|
|
Head = (pQueue->Head + 1) % pQueue->Size;
|
|
|
|
#if !defined(QQ_NO_OVERFLOW_CHECK)
|
|
if(Head == pQueue->Tail) {
|
|
return 0;
|
|
} /* if */
|
|
#endif /* QQ_NO_OVERFLOW_CHECK */
|
|
|
|
pQueue->Array[pQueue->Head] = pEntry;
|
|
wmb();
|
|
pQueue->Head = Head;
|
|
atomic_inc(&pQueue->EntryCnt);
|
|
|
|
return -1;
|
|
} /* QQ_PushHead */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/* TRUE entry was added successfully. */
|
|
/* FALSE queue is full. */
|
|
/******************************************************************************/
|
|
char
|
|
QQ_PushTail(
|
|
PQQ_CONTAINER pQueue,
|
|
PQQ_ENTRY pEntry) {
|
|
unsigned int Tail;
|
|
|
|
Tail = pQueue->Tail;
|
|
if(Tail == 0) {
|
|
Tail = pQueue->Size;
|
|
} /* if */
|
|
Tail--;
|
|
|
|
#if !defined(QQ_NO_OVERFLOW_CHECK)
|
|
if(Tail == pQueue->Head) {
|
|
return 0;
|
|
} /* if */
|
|
#endif /* QQ_NO_OVERFLOW_CHECK */
|
|
|
|
pQueue->Array[Tail] = pEntry;
|
|
wmb();
|
|
pQueue->Tail = Tail;
|
|
atomic_inc(&pQueue->EntryCnt);
|
|
|
|
return -1;
|
|
} /* QQ_PushTail */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
PQQ_ENTRY
|
|
QQ_PopHead(
|
|
PQQ_CONTAINER pQueue) {
|
|
unsigned int Head;
|
|
PQQ_ENTRY Entry;
|
|
|
|
Head = pQueue->Head;
|
|
|
|
#if !defined(QQ_NO_UNDERFLOW_CHECK)
|
|
if(Head == pQueue->Tail) {
|
|
return (PQQ_ENTRY) 0;
|
|
} /* if */
|
|
#endif /* QQ_NO_UNDERFLOW_CHECK */
|
|
|
|
if(Head == 0) {
|
|
Head = pQueue->Size;
|
|
} /* if */
|
|
Head--;
|
|
|
|
Entry = pQueue->Array[Head];
|
|
membar();
|
|
|
|
pQueue->Head = Head;
|
|
atomic_dec(&pQueue->EntryCnt);
|
|
|
|
return Entry;
|
|
} /* QQ_PopHead */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
PQQ_ENTRY
|
|
QQ_PopTail(
|
|
PQQ_CONTAINER pQueue) {
|
|
unsigned int Tail;
|
|
PQQ_ENTRY Entry;
|
|
|
|
Tail = pQueue->Tail;
|
|
|
|
#if !defined(QQ_NO_UNDERFLOW_CHECK)
|
|
if(Tail == pQueue->Head) {
|
|
return (PQQ_ENTRY) 0;
|
|
} /* if */
|
|
#endif /* QQ_NO_UNDERFLOW_CHECK */
|
|
|
|
Entry = pQueue->Array[Tail];
|
|
membar();
|
|
pQueue->Tail = (Tail + 1) % pQueue->Size;
|
|
atomic_dec(&pQueue->EntryCnt);
|
|
|
|
return Entry;
|
|
} /* QQ_PopTail */
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
PQQ_ENTRY
|
|
QQ_GetHead(
|
|
PQQ_CONTAINER pQueue,
|
|
unsigned int Idx)
|
|
{
|
|
if(Idx >= atomic_read(&pQueue->EntryCnt))
|
|
{
|
|
return (PQQ_ENTRY) 0;
|
|
}
|
|
|
|
if(pQueue->Head > Idx)
|
|
{
|
|
Idx = pQueue->Head - Idx;
|
|
}
|
|
else
|
|
{
|
|
Idx = pQueue->Size - (Idx - pQueue->Head);
|
|
}
|
|
Idx--;
|
|
|
|
return pQueue->Array[Idx];
|
|
}
|
|
|
|
|
|
/******************************************************************************/
|
|
/* Description: */
|
|
/* */
|
|
/* Return: */
|
|
/******************************************************************************/
|
|
PQQ_ENTRY
|
|
QQ_GetTail(
|
|
PQQ_CONTAINER pQueue,
|
|
unsigned int Idx)
|
|
{
|
|
if(Idx >= atomic_read(&pQueue->EntryCnt))
|
|
{
|
|
return (PQQ_ENTRY) 0;
|
|
}
|
|
|
|
Idx += pQueue->Tail;
|
|
if(Idx >= pQueue->Size)
|
|
{
|
|
Idx = Idx - pQueue->Size;
|
|
}
|
|
|
|
return pQueue->Array[Idx];
|
|
}
|
|
|
|
#endif /* CFG_CMD_NET, !CONFIG_NET_MULTI, CONFIG_BCM570x */
|