u-boot/board/Arcturus/ucp1020/spl.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

125 lines
3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2013-2015 Arcturus Networks, Inc.
* http://www.arcturusnetworks.com/products/ucp1020/
* based on board/freescale/p1_p2_rdb_pc/spl.c
* original copyright follows:
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <console.h>
#include <environment.h>
#include <ns16550.h>
#include <malloc.h>
#include <mmc.h>
#include <nand.h>
#include <i2c.h>
#include <fsl_esdhc.h>
#include <spi_flash.h>
DECLARE_GLOBAL_DATA_PTR;
static const u32 sysclk_tbl[] = {
66666000, 7499900, 83332500, 8999900,
99999000, 11111000, 12499800, 13333200
};
phys_size_t get_effective_memsize(void)
{
return CONFIG_SYS_L2_SIZE;
}
void board_init_f(ulong bootflag)
{
u32 plat_ratio, bus_clk;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
console_init_f();
/* Set pmuxcr to allow both i2c1 and i2c2 */
setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
setbits_be32(&gur->pmuxcr,
in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
/* Read back the register to synchronize the write. */
in_be32(&gur->pmuxcr);
#ifdef CONFIG_SPL_SPI_BOOT
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
#endif
/* initialize selected port with appropriate baud rate */
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
gd->bus_clk = bus_clk;
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
bus_clk / 16 / CONFIG_BAUDRATE);
#ifdef CONFIG_SPL_MMC_BOOT
puts("\nSD boot...\n");
#elif defined(CONFIG_SPL_SPI_BOOT)
puts("\nSPI Flash boot...\n");
#endif
/* copy code to RAM and jump to it - this should not return */
/* NOTE - code has to be copied out of NAND buffer before
* other blocks can be read.
*/
relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
}
void board_init_r(gd_t *gd, ulong dest_addr)
{
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *)CONFIG_SPL_GD_ADDR;
bd_t *bd;
memset(gd, 0, sizeof(gd_t));
bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
memset(bd, 0, sizeof(bd_t));
gd->bd = bd;
bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
bd->bi_memsize = CONFIG_SYS_L2_SIZE;
arch_cpu_init();
get_clocks();
mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
CONFIG_SPL_RELOC_MALLOC_SIZE);
#ifndef CONFIG_SPL_NAND_BOOT
env_init();
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_initialize(bd);
#endif
/* relocate environment function pointers etc. */
#ifdef CONFIG_SPL_NAND_BOOT
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_ENV_ADDR);
gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
gd->env_valid = ENV_VALID;
#else
env_relocate();
#endif
#ifdef CONFIG_SYS_I2C
i2c_init_all();
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
dram_init();
#ifdef CONFIG_SPL_NAND_BOOT
puts("Tertiary program loader running in sram...");
#else
puts("Second program loader running in sram...\n");
#endif
#ifdef CONFIG_SPL_MMC_BOOT
mmc_boot();
#elif defined(CONFIG_SPL_NAND_BOOT)
nand_boot();
#endif
}