mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
836cd45358
* the following problems are met : config was set to use the new driver as a default but - RMII was not enabled for the new driver - the new driver didn't compile with RMII enabled - the new driver initialize a PHY at address O when the PHY of this board is at 1 thus we get "AT91 EMAC RMII: No PHY present" * to fix these problems, this patch : - enable RMII for the new driver - fix the wrong define used in the at91_emac.c - allow the config file to set a default phy address (and use 0 as a default as in the actual at91_emac.c driver) Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
233 lines
7.2 KiB
C
233 lines
7.2 KiB
C
/*
|
|
* CPUAT91 by (C) Copyright 2006 Eric Benard
|
|
* eric@eukrea.com
|
|
*
|
|
* Configuration settings for the CPUAT91 board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_AT91_LEGACY
|
|
|
|
#ifdef CONFIG_CPUAT91_RAM
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT 1
|
|
#define CONFIG_SKIP_RELOCATE_UBOOT 1
|
|
#define CONFIG_CPUAT91 1
|
|
#else
|
|
#define CONFIG_BOOTDELAY 1
|
|
#endif
|
|
|
|
#define AT91C_MAIN_CLOCK 179712000
|
|
#define AT91C_MASTER_CLOCK 59904000
|
|
|
|
#define AT91_SLOW_CLOCK 32768
|
|
|
|
#define CONFIG_ARM920T 1
|
|
#define CONFIG_AT91RM9200 1
|
|
|
|
#undef CONFIG_USE_IRQ
|
|
#define USE_920T_MMU 1
|
|
|
|
#define CONFIG_CMDLINE_TAG 1
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
|
|
/* flash */
|
|
#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
|
|
#define CONFIG_SYS_MC_PUP_VAL 0x00000000
|
|
#define CONFIG_SYS_MC_PUER_VAL 0x00000000
|
|
#define CONFIG_SYS_MC_ASR_VAL 0x00000000
|
|
#define CONFIG_SYS_MC_AASR_VAL 0x00000000
|
|
#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
|
|
#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
|
|
|
|
/* clocks */
|
|
#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
|
|
#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */
|
|
#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */
|
|
|
|
/* sdram */
|
|
#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */
|
|
#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
|
|
#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
|
|
#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
|
|
#define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */
|
|
#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */
|
|
#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */
|
|
#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */
|
|
#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
|
|
#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
|
|
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|
|
|
|
/* define one of these to choose the DBGU, USART0 or USART1 as console */
|
|
#define CONFIG_AT91RM9200_USART 1
|
|
#define CONFIG_DBGU 1
|
|
#undef CONFIG_USART0
|
|
#undef CONFIG_USART1
|
|
|
|
#define CONFIG_HARD_I2C 1
|
|
|
|
#if defined(CONFIG_HARD_I2C)
|
|
#define CONFIG_SYS_I2C_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SLAVE 0
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
#endif
|
|
|
|
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
|
#define CONFIG_BOOTP_BOOTPATH 1
|
|
#define CONFIG_BOOTP_GATEWAY 1
|
|
#define CONFIG_BOOTP_HOSTNAME 1
|
|
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_DHCP 1
|
|
#define CONFIG_CMD_PING 1
|
|
#define CONFIG_CMD_MII 1
|
|
#define CONFIG_CMD_CACHE 1
|
|
#undef CONFIG_CMD_USB
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_IMI
|
|
#undef CONFIG_CMD_LOADS
|
|
#undef CONFIG_CMD_NFS
|
|
|
|
#if defined(CONFIG_HARD_I2C)
|
|
#define CONFIG_CMD_EEPROM 1
|
|
#define CONFIG_CMD_I2C 1
|
|
#endif
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM 0x20000000
|
|
#define PHYS_SDRAM_SIZE 0x02000000
|
|
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
|
#define CONFIG_SYS_MEMTEST_END \
|
|
(CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024)
|
|
|
|
#define CONFIG_NET_MULTI 1
|
|
#define CONFIG_DRIVER_AT91EMAC 1
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 8
|
|
#define CONFIG_RMII 1
|
|
#define CONFIG_MII 1
|
|
#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#define CONFIG_KS8721_PHY 1
|
|
|
|
#define CONFIG_SYS_FLASH_CFI 1
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO 1
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
|
|
#if defined(CONFIG_CMD_USB)
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CONFIG_USB_STORAGE 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
#define CONFIG_AT91C_PQFP_UHPBU 1
|
|
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
|
|
#endif
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000)
|
|
#define CONFIG_ENV_SIZE 0x20000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x21000000
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
|
|
|
|
#define CONFIG_SYS_PROMPT "CPUAT91=> "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 32
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
#define CONFIG_SYS_LONGHELP 1
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
|
#define CONFIG_STACKSIZE (32 * 1024)
|
|
|
|
#if defined(CONFIG_USE_IRQ)
|
|
#error CONFIG_USE_IRQ not supported
|
|
#endif
|
|
|
|
#define CONFIG_DEVICE_NULLDEV 1
|
|
#define CONFIG_SILENT_CONSOLE 1
|
|
|
|
#define CONFIG_AUTOBOOT_KEYED 1
|
|
#define CONFIG_AUTOBOOT_PROMPT \
|
|
"Press SPACE to abort autoboot\n"
|
|
#define CONFIG_AUTOBOOT_STOP_STR " "
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "d"
|
|
|
|
#define CONFIG_VERSION_VARIABLE 1
|
|
|
|
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
|
|
#define MTDPARTS_DEFAULT \
|
|
"mtdparts=physmap-flash.0:" \
|
|
"128k(u-boot)ro," \
|
|
"128k(u-boot-env)," \
|
|
"1408k(kernel)," \
|
|
"-(rootfs)"
|
|
|
|
#define CONFIG_BOOTARGS \
|
|
"root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200"
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flashboot"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"mtdid=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 " \
|
|
"1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \
|
|
"10000000 ${filesize}\0" \
|
|
"flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \
|
|
"1019ffff; erase 10040000 1019ffff; cp.b 21000000 " \
|
|
"10040000 ${filesize}\0" \
|
|
"flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \
|
|
"101a0000 10ffffff; erase 101a0000 10ffffff; cp.b " \
|
|
"21000000 101A0000 ${filesize}\0" \
|
|
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
|
|
"flashboot=run ramargs;bootm 10040000\0" \
|
|
"netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \
|
|
"bootm 21000000\0"
|
|
#endif /* __CONFIG_H */
|