u-boot/board/netstal/hcu5/sdram.c
Wolfgang Denk bde6358762 Fix some more printf() format issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-11 22:56:11 +02:00

283 lines
7.6 KiB
C

/*
* (C) Copyright 2007
* Niklaus Giger (Niklaus.Giger@netstal.com)
* (C) Copyright 2006
* Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
* Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
* Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* define DEBUG for debug output */
#undef DEBUG
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <ppc440.h>
void hcu_led_set(u32 value);
void dcbz_area(u32 start_address, u32 num_bytes);
#define ECC_RAM 0x03267F0B
#define NO_ECC_RAM 0x00267F0B
#define HCU_HW_SDRAM_CONFIG_MASK 0x7
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
/* disable caching on DDR2 */
void board_add_ram_info(int use_default)
{
PPC4xx_SYS_INFO board_cfg;
u32 val;
mfsdram(DDR0_22, val);
val &= DDR0_22_CTRL_RAW_MASK;
switch (val) {
case DDR0_22_CTRL_RAW_ECC_DISABLE:
puts(" (ECC disabled");
break;
case DDR0_22_CTRL_RAW_ECC_CHECK_ONLY:
puts(" (ECC check only");
break;
case DDR0_22_CTRL_RAW_NO_ECC_RAM:
puts(" (no ECC ram");
break;
case DDR0_22_CTRL_RAW_ECC_ENABLE:
puts(" (ECC enabled");
break;
}
get_sys_info(&board_cfg);
printf(", %lu MHz", (board_cfg.freqPLB * 2) / 1000000);
mfsdram(DDR0_03, val);
val = DDR0_03_CASLAT_DECODE(val);
printf(", CL%d)", val);
}
/*--------------------------------------------------------------------
* wait_for_dlllock.
*--------------------------------------------------------------------*/
static int wait_for_dlllock(void)
{
unsigned long val;
int wait = 0;
/* -----------------------------------------------------------+
* Wait for the DCC master delay line to finish calibration
* ----------------------------------------------------------*/
mtdcr(memcfga, DDR0_17);
val = DDR0_17_DLLLOCKREG_UNLOCKED;
while (wait != 0xffff) {
val = mfdcr(memcfgd);
if ((val & DDR0_17_DLLLOCKREG_MASK) ==
DDR0_17_DLLLOCKREG_LOCKED)
/* dlllockreg bit on */
return 0;
else
wait++;
}
debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
debug("Waiting for dlllockreg bit to raise\n");
return -1;
}
/***********************************************************************
*
* sdram_panic -- Panic if we cannot configure the sdram correctly
*
************************************************************************/
void sdram_panic(const char *reason)
{
printf("\n%s: reason %s", __FUNCTION__, reason);
hcu_led_set(0xff);
while (1) {
}
/* Never return */
}
#ifdef CONFIG_DDR_ECC
static void blank_string(int size)
{
int i;
for (i=0; i<size; i++)
putc('\b');
for (i=0; i<size; i++)
putc(' ');
for (i=0; i<size; i++)
putc('\b');
}
/*---------------------------------------------------------------------------+
* program_ecc.
*---------------------------------------------------------------------------*/
static void program_ecc(unsigned long start_address, unsigned long num_bytes)
{
u32 val;
char str[] = "ECC generation -";
#if defined(CONFIG_PRAM)
u32 *magicPtr;
u32 magic;
if ((mfspr(dbcr0) & 0x80000000) == 0) {
/* only if no external debugger is alive!
* Check whether vxWorks is using EDR logging, if yes zero
* also PostMortem and user reserved memory
*/
magicPtr = (u32 *)(start_address + num_bytes -
(CONFIG_PRAM*1024) + sizeof(u32));
magic = in_be32(magicPtr);
debug("%s: CONFIG_PRAM %d kB magic 0x%x 0x%p\n",
__FUNCTION__, CONFIG_PRAM,
magicPtr, magic);
if (magic == 0xbeefbabe) {
printf("%s: preserving at %p\n", __FUNCTION__, magicPtr);
num_bytes -= (CONFIG_PRAM*1024) - PM_RESERVED_MEM;
}
}
#endif
sync();
puts(str);
/* ECC bit set method for cached memory */
/* Fast method, no noticeable delay */
dcbz_area(start_address, num_bytes);
/* Write modified dcache lines back to memory */
clean_dcache_range(start_address, start_address + num_bytes);
blank_string(strlen(str));
/* Clear error status */
mfsdram(DDR0_00, val);
mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
/*
* Clear possible ECC errors
* If not done, then we could get an interrupt later on when
* exceptions are enabled.
*/
mtspr(mcsr, mfspr(mcsr));
/* Set 'int_mask' parameter to functionnal value */
mfsdram(DDR0_01, val);
mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) |
DDR0_01_INT_MASK_ALL_OFF));
return;
}
#endif
/***********************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
*
************************************************************************/
phys_size_t initdram (int board_type)
{
unsigned int dram_size = 0;
mtsdram(DDR0_02, 0x00000000);
/* Values must be kept in sync with Excel-table <<A0001492.>> ! */
mtsdram(DDR0_00, 0x0000190A);
mtsdram(DDR0_01, 0x01000000);
mtsdram(DDR0_03, 0x02030602);
mtsdram(DDR0_04, 0x0A020200);
mtsdram(DDR0_05, 0x02020307);
switch (in_be16((u16 *)HCU_HW_VERSION_REGISTER) & HCU_HW_SDRAM_CONFIG_MASK) {
case 1:
dram_size = 256 * 1024 * 1024 ;
mtsdram(DDR0_06, 0x0102C812); /* 256MB RAM */
mtsdram(DDR0_11, 0x0014C800); /* 256MB RAM */
mtsdram(DDR0_43, 0x030A0200); /* 256MB RAM */
break;
case 0:
default:
dram_size = 128 * 1024 * 1024 ;
mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */
mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */
mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */
break;
}
mtsdram(DDR0_07, 0x00090100);
/*
* TCPD=200 cycles of clock input is required to lock the DLL.
* CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001);
*/
mtsdram(DDR0_08, 0x02C80001);
mtsdram(DDR0_09, 0x00011D5F);
mtsdram(DDR0_10, 0x00000100);
mtsdram(DDR0_12, 0x00000003);
mtsdram(DDR0_14, 0x00000000);
mtsdram(DDR0_17, 0x1D000000);
mtsdram(DDR0_18, 0x1D1D1D1D);
mtsdram(DDR0_19, 0x1D1D1D1D);
mtsdram(DDR0_20, 0x0B0B0B0B);
mtsdram(DDR0_21, 0x0B0B0B0B);
#ifdef CONFIG_DDR_ECC
mtsdram(DDR0_22, ECC_RAM);
#else
mtsdram(DDR0_22, NO_ECC_RAM);
#endif
mtsdram(DDR0_23, 0x00000000);
mtsdram(DDR0_24, 0x01020001);
mtsdram(DDR0_26, 0x2D930517);
mtsdram(DDR0_27, 0x00008236);
mtsdram(DDR0_28, 0x00000000);
mtsdram(DDR0_31, 0x00000000);
mtsdram(DDR0_42, 0x01000006);
mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001);
wait_for_dlllock();
mtsdram(DDR0_00, 0x40000000); /* Zero init bit */
/*
* Program tlb entries for this size (dynamic)
*/
remove_tlb(CFG_SDRAM_BASE, 256 << 20);
program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual
* address with cache enabled. This is done for fast ECC generation.
*/
program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0);
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
*/
program_ecc(CFG_DDR_CACHED_ADDR, dram_size);
#endif
return (dram_size);
}