Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 23:47:24 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cpu/mips/au1x00_eth.c
Thomas Lange 87423d740b MIPS: Implement ethernet halt for au1x00 
Implement ethernet halt() by putting MAC0 in reset.
If we do not do this, we will get memory corruption
when ethernet frames are received during early OS boot.

Signed-off-by: Thomas Lange <thomas@corelatus.se>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2009-05-16 09:20:03 +09:00

311 lines
7.4 KiB
C
Raw Blame History

/* Only eth0 supported for now
*
* (C) Copyright 2003
* Thomas.Lange@corelatus.se
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#if defined(CONFIG_SYS_DISCOVER_PHY)
#error "PHY not supported yet"
/* We just assume that we are running 100FD for now */
/* We all use switches, right? ;-) */
#endif
/* I assume ethernet behaves like au1000 */
#ifdef CONFIG_SOC_AU1000
/* Base address differ between cpu:s */
#define ETH0_BASE AU1000_ETH0_BASE
#define MAC0_ENABLE AU1000_MAC0_ENABLE
#else
#ifdef CONFIG_SOC_AU1100
#define ETH0_BASE AU1100_ETH0_BASE
#define MAC0_ENABLE AU1100_MAC0_ENABLE
#else
#ifdef CONFIG_SOC_AU1500
#define ETH0_BASE AU1500_ETH0_BASE
#define MAC0_ENABLE AU1500_MAC0_ENABLE
#else
#ifdef CONFIG_SOC_AU1550
#define ETH0_BASE AU1550_ETH0_BASE
#define MAC0_ENABLE AU1550_MAC0_ENABLE
#else
#error "No valid cpu set"
#endif
#endif
#endif
#endif
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <command.h>
#include <asm/io.h>
#include <asm/au1x00.h>
#if defined(CONFIG_CMD_MII)
#include <miiphy.h>
#endif
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define PKT_MAXBUF_SIZE 1518
static char txbuf[DBUF_LENGTH];
static int next_tx;
static int next_rx;
/* 4 rx and 4 tx fifos */
#define NO_OF_FIFOS 4
typedef struct{
u32 status;
u32 addr;
u32 len; /* Only used for tx */
u32 not_used;
} mac_fifo_t;
mac_fifo_t mac_fifo[NO_OF_FIFOS];
#define MAX_WAIT 1000
#if defined(CONFIG_CMD_MII)
int au1x00_miiphy_read(char *devname, unsigned char addr,
unsigned char reg, unsigned short * value)
{
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
u32 mii_control;
unsigned int timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_read busy timeout!!\n");
return -1;
}
}
mii_control = MAC_SET_MII_SELECT_REG(reg) |
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
*mii_control_reg = mii_control;
timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_read busy timeout!!\n");
return -1;
}
}
*value = *mii_data_reg;
return 0;
}
int au1x00_miiphy_write(char *devname, unsigned char addr,
unsigned char reg, unsigned short value)
{
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
u32 mii_control;
unsigned int timedout = 20;
while (*mii_control_reg & MAC_MII_BUSY) {
udelay(1000);
if (--timedout == 0) {
printf("au1x00_eth: miiphy_write busy timeout!!\n");
return -1;
}
}
mii_control = MAC_SET_MII_SELECT_REG(reg) |
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
*mii_data_reg = value;
*mii_control_reg = mii_control;
return 0;
}
#endif
static int au1x00_send(struct eth_device* dev, volatile void *packet, int length){
volatile mac_fifo_t *fifo_tx =
(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
int i;
int res;
/* tx fifo should always be idle */
fifo_tx[next_tx].len = length;
fifo_tx[next_tx].addr = (virt_to_phys(packet))|TX_DMA_ENABLE;
au_sync();
udelay(1);
i=0;
while(!(fifo_tx[next_tx].addr&TX_T_DONE)){
if(i>MAX_WAIT){
printf("TX timeout\n");
break;
}
udelay(1);
i++;
}
/* Clear done bit */
fifo_tx[next_tx].addr = 0;
fifo_tx[next_tx].len = 0;
au_sync();
res = fifo_tx[next_tx].status;
next_tx++;
if(next_tx>=NO_OF_FIFOS){
next_tx=0;
}
return(res);
}
static int au1x00_recv(struct eth_device* dev){
volatile mac_fifo_t *fifo_rx =
(volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
int length;
u32 status;
for(;;){
if(!(fifo_rx[next_rx].addr&RX_T_DONE)){
/* Nothing has been received */
return(-1);
}
status = fifo_rx[next_rx].status;
length = status&0x3FFF;
if(status&RX_ERROR){
printf("Rx error 0x%x\n", status);
}
else{
/* Pass the packet up to the protocol layers. */
NetReceive(NetRxPackets[next_rx], length - 4);
}
fifo_rx[next_rx].addr = (virt_to_phys(NetRxPackets[next_rx]))|RX_DMA_ENABLE;
next_rx++;
if(next_rx>=NO_OF_FIFOS){
next_rx=0;
}
} /* for */
return(0); /* Does anyone use this? */
}
static int au1x00_init(struct eth_device* dev, bd_t * bd){
volatile u32 *macen = (volatile u32*)MAC0_ENABLE;
volatile u32 *mac_ctrl = (volatile u32*)(ETH0_BASE+MAC_CONTROL);
volatile u32 *mac_addr_high = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_HIGH);
volatile u32 *mac_addr_low = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_LOW);
volatile u32 *mac_mcast_high = (volatile u32*)(ETH0_BASE+MAC_MCAST_HIGH);
volatile u32 *mac_mcast_low = (volatile u32*)(ETH0_BASE+MAC_MCAST_LOW);
volatile mac_fifo_t *fifo_tx =
(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
volatile mac_fifo_t *fifo_rx =
(volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
int i;
next_tx = TX_GET_DMA_BUFFER(fifo_tx[0].addr);
next_rx = RX_GET_DMA_BUFFER(fifo_rx[0].addr);
/* We have to enable clocks before releasing reset */
*macen = MAC_EN_CLOCK_ENABLE;
udelay(10);
/* Enable MAC0 */
/* We have to release reset before accessing registers */
*macen = MAC_EN_CLOCK_ENABLE|MAC_EN_RESET0|
MAC_EN_RESET1|MAC_EN_RESET2;
udelay(10);
for(i=0;i<NO_OF_FIFOS;i++){
fifo_tx[i].len = 0;
fifo_tx[i].addr = virt_to_phys(&txbuf[0]);
fifo_rx[i].addr = (virt_to_phys(NetRxPackets[i]))|RX_DMA_ENABLE;
}
/* Put mac addr in little endian */
#define ea eth_get_dev()->enetaddr
*mac_addr_high = (ea[5] << 8) | (ea[4] ) ;
*mac_addr_low = (ea[3] << 24) | (ea[2] << 16) |
(ea[1] << 8) | (ea[0] ) ;
#undef ea
*mac_mcast_low = 0;
*mac_mcast_high = 0;
/* Make sure the MAC buffer is in the correct endian mode */
#ifdef __LITTLE_ENDIAN
*mac_ctrl = MAC_FULL_DUPLEX;
udelay(1);
*mac_ctrl = MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
#else
*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX;
udelay(1);
*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
#endif
return(1);
}
static void au1x00_halt(struct eth_device* dev){
volatile u32 *macen = (volatile u32*)MAC0_ENABLE;
/* Put MAC0 in reset */
*macen = 0;
}
int au1x00_enet_initialize(bd_t *bis){
struct eth_device* dev;
if ((dev = (struct eth_device*)malloc(sizeof *dev)) == NULL) {
puts ("malloc failed\n");
return -1;
}
memset(dev, 0, sizeof *dev);
sprintf(dev->name, "Au1X00 ethernet");
dev->iobase = 0;
dev->priv = 0;
dev->init = au1x00_init;
dev->halt = au1x00_halt;
dev->send = au1x00_send;
dev->recv = au1x00_recv;
eth_register(dev);
#if defined(CONFIG_CMD_MII)
miiphy_register(dev->name,
au1x00_miiphy_read, au1x00_miiphy_write);
#endif
return 1;
}
Reference in a new issue View git blame Copy permalink