u-boot/board/freescale/imx8qm_mek
Simon Glass f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
..
imx8qm_mek.c imx: imx8qm: update fdt_file according to m4 state 2020-05-10 20:55:20 +02:00
imximage.cfg imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
Kconfig imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
MAINTAINERS imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
Makefile imx: support i.MX8QM MEK board 2019-04-25 17:03:25 +02:00
README imx8: update README 2019-10-08 16:36:36 +02:00
spl.c common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
uboot-container.cfg imx8qm_mek: switch to use container image 2019-10-08 16:35:58 +02:00

U-Boot for the NXP i.MX8QM EVK board

Quick Start
===========

- Build the ARM Trusted firmware binary
- Get scfw_tcm.bin and ahab-container.img
- Build U-Boot
- Flash the binary into the SD card
- Boot

Get and Build the ARM Trusted firmware
======================================

$ git clone https://source.codeaurora.org/external/imx/imx-atf
$ cd imx-atf/
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
$ make PLAT=imx8qm bl31

Get scfw_tcm.bin and ahab-container.img
==============================

$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
$ chmod +x imx-sc-firmware-1.1.bin
$ ./imx-sc-firmware-1.1.bin
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
$ chmod +x firmware-imx-8.0.bin
$ ./firmware-imx-8.0.bin

Copy the following binaries to U-Boot folder:

$ cp imx-atf/build/imx8qm/release/bl31.bin .
$ cp u-boot/u-boot.bin .

Copy the following firmwares U-Boot folder :

$ cp firmware-imx-7.6/firmware/seco/ahab-container.img .
$ cp imx-sc-firmware-0.7/mx8qm-mek-scfw-tcm.bin	.

Build U-Boot
============
$ make imx8qm_mek_defconfig
$ make flash.bin

Flash the binary into the SD card
=================================

Burn the flash.bin binary to SD card offset 32KB:

$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32

Boot
====
Set Boot switch SW2: 1100.