u-boot/board/eets/pdu001
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
..
board.c SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
board.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
Kconfig Convert all of CONFIG_CONS_INDEX to Kconfig 2018-03-16 10:28:52 -04:00
MAINTAINERS arm: add support for PDU001 2018-01-28 12:27:32 -05:00
Makefile arm: add support for PDU001 2018-01-28 12:27:32 -05:00
mux.c SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
README arm: add support for PDU001 2018-01-28 12:27:32 -05:00

# Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
#
# SPDX-License-Identifier: GPL-2.0+
#

Summary
=======

This document covers the PDU001 target.

Hardware
========

The PDU-001 (Processor and Display Unit) is a plugin card for 19" racks. It is
manufactured by EETS GmbH (https://www.eets.ch). The core of the board is a m2
SOM from bytes at work (https://www.bytesatwork.ch) which in turn is based on
AM3352 SOC from TI (http://www.ti.com).

Customization
=============

As usual the console serial interface is set by CONFIG_CONS_INDEX. Best choice
is 4 here since UART3 is wired to the connector K2.
The Run LED on the PDU-001 can be turned on red by setting CONFIG_RUN_LED_RED
or green by setting CONFIG_RUN_LED_GREEN. Setting CONFIG_RUN_LED_OFF will turn
off the Run LED.

Booting
=======

The system boots from either eMMC or SD card cage. It will first try to boot
from the SD card cage. If this fails (missing or unbootable SD card) it will
try to boot from the internal eMMC. The root file system is always expected to
be located in the second partition of the device (eMMC or SD card) that pro-
vided the boot loader.