mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
0197909dd1
First check the presence of the ipu firmware in the boot partition. If present enable the ipu and the related clocks & then move on to load the firmware and eventually start remoteproc IPU1/IPU2. do_enable_clocks by default puts the clock domains into auto which does not work well with reset. Hence adding do_enable_ipu_clocks function. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix IPU1_LOAD_ADDR and compile warnings] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
892 lines
27 KiB
C
892 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
*
|
|
* HW data initialization for OMAP5
|
|
*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Sricharan R <r.sricharan@ti.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <palmas.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/omap_gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
|
|
struct prcm_regs const **prcm =
|
|
(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
|
|
struct dplls const **dplls_data =
|
|
(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
|
|
struct vcores_data const **omap_vcores =
|
|
(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
|
|
struct omap_sys_ctrl_regs const **ctrl =
|
|
(struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
|
|
|
|
/* OPP NOM FREQUENCY for ES1.0 */
|
|
static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
|
|
{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
|
|
{1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
|
|
};
|
|
|
|
/* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */
|
|
static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
|
|
{250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
|
|
{119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params
|
|
core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
|
|
{266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
|
|
{443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */
|
|
{277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */
|
|
{368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params
|
|
core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = {
|
|
{266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
|
|
{443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */
|
|
{277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */
|
|
{368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params
|
|
core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
|
|
{266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */
|
|
{266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */
|
|
{443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */
|
|
{277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */
|
|
{368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
|
|
{32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
|
|
{160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
|
|
{32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
|
|
{160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
|
|
{32, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 12 MHz */
|
|
{96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */
|
|
{160, 6, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{20, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{192, 12, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params per_dpll_params_768mhz_dra76x[NUM_SYS_CLKS] = {
|
|
{32, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 12 MHz */
|
|
{96, 4, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 20 MHz */
|
|
{160, 6, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{20, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{192, 12, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{10, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
|
|
{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
|
|
{208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
|
|
{1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
|
|
{208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
/* ABE M & N values with sys_clk as source */
|
|
#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
|
|
static const struct dpll_params
|
|
abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
|
|
{49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
|
|
{35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
|
|
};
|
|
#endif
|
|
|
|
/* ABE M & N values with 32K clock as source */
|
|
#ifndef CONFIG_SYS_OMAP_ABE_SYSCK
|
|
static const struct dpll_params abe_dpll_params_32k_196608khz = {
|
|
750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
|
|
};
|
|
#endif
|
|
|
|
/* ABE M & N values with sysclk2(22.5792 MHz) as input */
|
|
static const struct dpll_params
|
|
abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
|
|
{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
|
|
{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = {
|
|
{111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
|
|
{555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
|
|
{266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
|
|
{190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
static const struct dpll_params gmac_dpll_params_2000mhz[NUM_SYS_CLKS] = {
|
|
{250, 2, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 12 MHz */
|
|
{250, 4, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 20 MHz */
|
|
{119, 1, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 16.8 MHz */
|
|
{625, 11, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{500, 12, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 26 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
|
|
{625, 23, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 38.4 MHz */
|
|
};
|
|
|
|
struct dplls omap5_dplls_es1 = {
|
|
.mpu = mpu_dpll_params_800mhz,
|
|
.core = core_dpll_params_2128mhz_ddr532,
|
|
.per = per_dpll_params_768mhz,
|
|
.iva = iva_dpll_params_2330mhz,
|
|
#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
|
|
.abe = abe_dpll_params_sysclk_196608khz,
|
|
#else
|
|
.abe = &abe_dpll_params_32k_196608khz,
|
|
#endif
|
|
.usb = usb_dpll_params_1920mhz,
|
|
.ddr = NULL
|
|
};
|
|
|
|
struct dplls omap5_dplls_es2 = {
|
|
.mpu = mpu_dpll_params_1ghz,
|
|
.core = core_dpll_params_2128mhz_ddr532_es2,
|
|
.per = per_dpll_params_768mhz_es2,
|
|
.iva = iva_dpll_params_2330mhz,
|
|
#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
|
|
.abe = abe_dpll_params_sysclk_196608khz,
|
|
#else
|
|
.abe = &abe_dpll_params_32k_196608khz,
|
|
#endif
|
|
.usb = usb_dpll_params_1920mhz,
|
|
.ddr = NULL
|
|
};
|
|
|
|
struct dplls dra76x_dplls = {
|
|
.mpu = mpu_dpll_params_1ghz,
|
|
.core = core_dpll_params_2128mhz_dra7xx,
|
|
.per = per_dpll_params_768mhz_dra76x,
|
|
.abe = abe_dpll_params_sysclk2_361267khz,
|
|
.iva = iva_dpll_params_2330mhz_dra7xx,
|
|
.usb = usb_dpll_params_1920mhz,
|
|
.ddr = ddr_dpll_params_2664mhz,
|
|
.gmac = gmac_dpll_params_2000mhz,
|
|
};
|
|
|
|
struct dplls dra7xx_dplls = {
|
|
.mpu = mpu_dpll_params_1ghz,
|
|
.core = core_dpll_params_2128mhz_dra7xx,
|
|
.per = per_dpll_params_768mhz_dra7xx,
|
|
.abe = abe_dpll_params_sysclk2_361267khz,
|
|
.iva = iva_dpll_params_2330mhz_dra7xx,
|
|
.usb = usb_dpll_params_1920mhz,
|
|
.ddr = ddr_dpll_params_2128mhz,
|
|
.gmac = gmac_dpll_params_2000mhz,
|
|
};
|
|
|
|
struct dplls dra72x_dplls = {
|
|
.mpu = mpu_dpll_params_1ghz,
|
|
.core = core_dpll_params_2128mhz_dra7xx,
|
|
.per = per_dpll_params_768mhz_dra7xx,
|
|
.abe = abe_dpll_params_sysclk2_361267khz,
|
|
.iva = iva_dpll_params_2330mhz_dra7xx,
|
|
.usb = usb_dpll_params_1920mhz,
|
|
.ddr = ddr_dpll_params_2664mhz,
|
|
.gmac = gmac_dpll_params_2000mhz,
|
|
};
|
|
|
|
struct pmic_data palmas = {
|
|
.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
|
|
.step = 10000, /* 10 mV represented in uV */
|
|
/*
|
|
* Offset codes 1-6 all give the base voltage in Palmas
|
|
* Offset code 0 switches OFF the SMPS
|
|
*/
|
|
.start_code = 6,
|
|
.i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
|
|
.pmic_bus_init = sri2c_init,
|
|
.pmic_write = omap_vc_bypass_send_value,
|
|
.gpio_en = 0,
|
|
};
|
|
|
|
/* The TPS659038 and TPS65917 are software-compatible, use common struct */
|
|
struct pmic_data tps659038 = {
|
|
.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
|
|
.step = 10000, /* 10 mV represented in uV */
|
|
/*
|
|
* Offset codes 1-6 all give the base voltage in Palmas
|
|
* Offset code 0 switches OFF the SMPS
|
|
*/
|
|
.start_code = 6,
|
|
.i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR,
|
|
.pmic_bus_init = gpi2c_init,
|
|
.pmic_write = palmas_i2c_write_u8,
|
|
.gpio_en = 0,
|
|
};
|
|
|
|
/* The LP87565*/
|
|
struct pmic_data lp87565 = {
|
|
.base_offset = LP873X_BUCK_BASE_VOLT_UV,
|
|
.step = 5000, /* 5 mV represented in uV */
|
|
/*
|
|
* Offset codes 0 - 0x13 Invalid.
|
|
* Offset codes 0x14 0x17 give 10mV steps
|
|
* Offset codes 0x17 through 0x9D give 5mV steps
|
|
* So let us start with our operating range from .73V
|
|
*/
|
|
.start_code = 0x17,
|
|
.i2c_slave_addr = 0x60,
|
|
.pmic_bus_init = gpi2c_init,
|
|
.pmic_write = palmas_i2c_write_u8,
|
|
};
|
|
|
|
/* The LP8732 and LP8733 are software-compatible, use common struct */
|
|
struct pmic_data lp8733 = {
|
|
.base_offset = LP873X_BUCK_BASE_VOLT_UV,
|
|
.step = 5000, /* 5 mV represented in uV */
|
|
/*
|
|
* Offset codes 0 - 0x13 Invalid.
|
|
* Offset codes 0x14 0x17 give 10mV steps
|
|
* Offset codes 0x17 through 0x9D give 5mV steps
|
|
* So let us start with our operating range from .73V
|
|
*/
|
|
.start_code = 0x17,
|
|
.i2c_slave_addr = 0x60,
|
|
.pmic_bus_init = gpi2c_init,
|
|
.pmic_write = palmas_i2c_write_u8,
|
|
};
|
|
|
|
struct vcores_data omap5430_volts = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU,
|
|
.mpu.addr = SMPS_REG_ADDR_12_MPU,
|
|
.mpu.pmic = &palmas,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE,
|
|
.core.addr = SMPS_REG_ADDR_8_CORE,
|
|
.core.pmic = &palmas,
|
|
|
|
.mm.value[OPP_NOM] = VDD_MM,
|
|
.mm.addr = SMPS_REG_ADDR_45_IVA,
|
|
.mm.pmic = &palmas,
|
|
};
|
|
|
|
struct vcores_data omap5430_volts_es2 = {
|
|
.mpu.value[OPP_NOM] = VDD_MPU_ES2,
|
|
.mpu.addr = SMPS_REG_ADDR_12_MPU,
|
|
.mpu.pmic = &palmas,
|
|
.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
|
|
|
|
.core.value[OPP_NOM] = VDD_CORE_ES2,
|
|
.core.addr = SMPS_REG_ADDR_8_CORE,
|
|
.core.pmic = &palmas,
|
|
|
|
.mm.value[OPP_NOM] = VDD_MM_ES2,
|
|
.mm.addr = SMPS_REG_ADDR_45_IVA,
|
|
.mm.pmic = &palmas,
|
|
.mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK,
|
|
|
|
.mpu.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MPU_OPNO_VMIN,
|
|
.mpu.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
|
|
|
|
.core.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_CORE_OPNO_VMIN,
|
|
.core.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
|
|
|
|
.mm.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MM_OPNO_VMIN,
|
|
.mm.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
|
|
};
|
|
|
|
/*
|
|
* Enable IPU1 clock domains, modules and
|
|
* do some additional special settings needed
|
|
*/
|
|
void enable_ipu1_clocks(void)
|
|
{
|
|
if (!IS_ENABLED(CONFIG_DRA7XX) ||
|
|
!IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
|
|
return;
|
|
|
|
u32 const clk_domains[] = {
|
|
(*prcm)->cm_ipu_clkstctrl,
|
|
(*prcm)->cm_ipu1_clkstctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_hw_auto_essential[] = {
|
|
(*prcm)->cm_ipu1_ipu1_clkctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_explicit_en_essential[] = {
|
|
(*prcm)->cm_l4per_gptimer11_clkctrl,
|
|
(*prcm)->cm1_abe_timer7_clkctrl,
|
|
(*prcm)->cm1_abe_timer8_clkctrl,
|
|
0
|
|
};
|
|
do_enable_ipu_clocks(clk_domains, clk_modules_hw_auto_essential,
|
|
clk_modules_explicit_en_essential, 0);
|
|
|
|
/* Enable optional additional functional clock for IPU1 */
|
|
setbits_le32((*prcm)->cm_ipu1_ipu1_clkctrl,
|
|
IPU1_CLKCTRL_CLKSEL_MASK);
|
|
/* Enable optional additional functional clock for IPU1 */
|
|
setbits_le32((*prcm)->cm1_abe_timer7_clkctrl,
|
|
IPU1_CLKCTRL_CLKSEL_MASK);
|
|
/* Enable optional additional functional clock for IPU1 */
|
|
setbits_le32((*prcm)->cm1_abe_timer8_clkctrl,
|
|
IPU1_CLKCTRL_CLKSEL_MASK);
|
|
}
|
|
|
|
/*
|
|
* Enable IPU2 clock domains, modules and
|
|
* do some additional special settings needed
|
|
*/
|
|
void enable_ipu2_clocks(void)
|
|
{
|
|
if (!IS_ENABLED(CONFIG_DRA7XX) ||
|
|
!IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
|
|
return;
|
|
|
|
u32 const clk_domains[] = {
|
|
(*prcm)->cm_ipu_clkstctrl,
|
|
(*prcm)->cm_ipu2_clkstctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_hw_auto_essential[] = {
|
|
(*prcm)->cm_ipu2_ipu2_clkctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_explicit_en_essential[] = {
|
|
(*prcm)->cm_l4per_gptimer3_clkctrl,
|
|
(*prcm)->cm_l4per_gptimer4_clkctrl,
|
|
(*prcm)->cm_l4per_gptimer9_clkctrl,
|
|
0
|
|
};
|
|
do_enable_ipu_clocks(clk_domains, clk_modules_hw_auto_essential,
|
|
clk_modules_explicit_en_essential, 0);
|
|
|
|
/* Enable optional additional functional clock for IPU2 */
|
|
setbits_le32((*prcm)->cm_l4per_gptimer4_clkctrl,
|
|
IPU1_CLKCTRL_CLKSEL_MASK);
|
|
/* Enable optional additional functional clock for IPU2 */
|
|
setbits_le32((*prcm)->cm_l4per_gptimer9_clkctrl,
|
|
IPU1_CLKCTRL_CLKSEL_MASK);
|
|
}
|
|
|
|
/*
|
|
* Enable essential clock domains, modules and
|
|
* do some additional special settings needed
|
|
*/
|
|
void enable_basic_clocks(void)
|
|
{
|
|
u32 const clk_domains_essential[] = {
|
|
(*prcm)->cm_l4per_clkstctrl,
|
|
(*prcm)->cm_l3init_clkstctrl,
|
|
(*prcm)->cm_memif_clkstctrl,
|
|
(*prcm)->cm_l4cfg_clkstctrl,
|
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
(*prcm)->cm_gmac_clkstctrl,
|
|
#endif
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_hw_auto_essential[] = {
|
|
(*prcm)->cm_l3_gpmc_clkctrl,
|
|
(*prcm)->cm_memif_emif_1_clkctrl,
|
|
(*prcm)->cm_memif_emif_2_clkctrl,
|
|
(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
|
|
(*prcm)->cm_wkup_gpio1_clkctrl,
|
|
(*prcm)->cm_l4per_gpio2_clkctrl,
|
|
(*prcm)->cm_l4per_gpio3_clkctrl,
|
|
(*prcm)->cm_l4per_gpio4_clkctrl,
|
|
(*prcm)->cm_l4per_gpio5_clkctrl,
|
|
(*prcm)->cm_l4per_gpio6_clkctrl,
|
|
(*prcm)->cm_l4per_gpio7_clkctrl,
|
|
(*prcm)->cm_l4per_gpio8_clkctrl,
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
(*prcm)->cm_l3init_ocp2scp3_clkctrl,
|
|
#endif
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_explicit_en_essential[] = {
|
|
(*prcm)->cm_wkup_gptimer1_clkctrl,
|
|
(*prcm)->cm_l3init_hsmmc1_clkctrl,
|
|
(*prcm)->cm_l3init_hsmmc2_clkctrl,
|
|
(*prcm)->cm_l4per_gptimer2_clkctrl,
|
|
(*prcm)->cm_wkup_wdtimer2_clkctrl,
|
|
(*prcm)->cm_l4per_uart1_clkctrl,
|
|
(*prcm)->cm_l4per_uart3_clkctrl,
|
|
(*prcm)->cm_l4per_i2c1_clkctrl,
|
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
(*prcm)->cm_gmac_gmac_clkctrl,
|
|
#endif
|
|
|
|
#ifdef CONFIG_TI_QSPI
|
|
(*prcm)->cm_l4per_qspi_clkctrl,
|
|
#endif
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
(*prcm)->cm_l3init_sata_clkctrl,
|
|
#endif
|
|
0
|
|
};
|
|
|
|
/* Enable optional additional functional clock for GPIO4 */
|
|
setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
|
|
GPIO4_CLKCTRL_OPTFCLKEN_MASK);
|
|
|
|
/* Enable 192 MHz clock for MMC1 & MMC2 */
|
|
setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
|
|
HSMMC_CLKCTRL_CLKSEL_MASK);
|
|
setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
|
|
HSMMC_CLKCTRL_CLKSEL_MASK);
|
|
|
|
/* Set the correct clock dividers for mmc */
|
|
clrbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
|
|
HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
|
|
clrbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
|
|
HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
|
|
|
|
/* Select 32KHz clock as the source of GPTIMER1 */
|
|
setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
|
|
GPTIMER1_CLKCTRL_CLKSEL_MASK);
|
|
|
|
do_enable_clocks(clk_domains_essential,
|
|
clk_modules_hw_auto_essential,
|
|
clk_modules_explicit_en_essential,
|
|
1);
|
|
|
|
#ifdef CONFIG_TI_QSPI
|
|
setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
|
|
#endif
|
|
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
/* Enable optional functional clock for SATA */
|
|
setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
|
|
SATA_CLKCTRL_OPTFCLKEN_MASK);
|
|
#endif
|
|
|
|
/* Enable SCRM OPT clocks for PER and CORE dpll */
|
|
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
|
|
OPTFCLKEN_SCRM_PER_MASK);
|
|
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
|
|
OPTFCLKEN_SCRM_CORE_MASK);
|
|
}
|
|
|
|
void enable_basic_uboot_clocks(void)
|
|
{
|
|
u32 cm_ipu_clkstctrl = 0;
|
|
|
|
if (IS_ENABLED(CONFIG_DRA7XX) &&
|
|
!IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
|
|
cm_ipu_clkstctrl = (*prcm)->cm_ipu_clkstctrl;
|
|
|
|
u32 const clk_domains_essential[] = {cm_ipu_clkstctrl, 0};
|
|
|
|
u32 const clk_modules_hw_auto_essential[] = {
|
|
(*prcm)->cm_l3init_hsusbtll_clkctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_explicit_en_essential[] = {
|
|
(*prcm)->cm_l4per_mcspi1_clkctrl,
|
|
(*prcm)->cm_l4per_i2c2_clkctrl,
|
|
(*prcm)->cm_l4per_i2c3_clkctrl,
|
|
(*prcm)->cm_l4per_i2c4_clkctrl,
|
|
#if defined(CONFIG_DRA7XX)
|
|
(*prcm)->cm_ipu_i2c5_clkctrl,
|
|
#else
|
|
(*prcm)->cm_l4per_i2c5_clkctrl,
|
|
#endif
|
|
(*prcm)->cm_l3init_hsusbhost_clkctrl,
|
|
(*prcm)->cm_l3init_fsusb_clkctrl,
|
|
0
|
|
};
|
|
do_enable_clocks(clk_domains_essential,
|
|
clk_modules_hw_auto_essential,
|
|
clk_modules_explicit_en_essential,
|
|
1);
|
|
}
|
|
|
|
#ifdef CONFIG_TI_EDMA3
|
|
void enable_edma3_clocks(void)
|
|
{
|
|
u32 const clk_domains_edma3[] = {
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_hw_auto_edma3[] = {
|
|
(*prcm)->cm_l3main1_tptc1_clkctrl,
|
|
(*prcm)->cm_l3main1_tptc2_clkctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_explicit_en_edma3[] = {
|
|
0
|
|
};
|
|
|
|
do_enable_clocks(clk_domains_edma3,
|
|
clk_modules_hw_auto_edma3,
|
|
clk_modules_explicit_en_edma3,
|
|
1);
|
|
}
|
|
|
|
void disable_edma3_clocks(void)
|
|
{
|
|
u32 const clk_domains_edma3[] = {
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_disable_edma3[] = {
|
|
(*prcm)->cm_l3main1_tptc1_clkctrl,
|
|
(*prcm)->cm_l3main1_tptc2_clkctrl,
|
|
0
|
|
};
|
|
|
|
do_disable_clocks(clk_domains_edma3,
|
|
clk_modules_disable_edma3,
|
|
1);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
|
|
void enable_usb_clocks(int index)
|
|
{
|
|
u32 cm_l3init_usb_otg_ss_clkctrl = 0;
|
|
|
|
if (index == 0) {
|
|
cm_l3init_usb_otg_ss_clkctrl =
|
|
(*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
|
|
/* Enable 960 MHz clock for dwc3 */
|
|
setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
|
|
OPTFCLKEN_REFCLK960M);
|
|
|
|
/* Enable 32 KHz clock for USB_PHY1 */
|
|
setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
|
|
/* Enable 32 KHz clock for USB_PHY3 */
|
|
if (is_dra7xx())
|
|
setbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
} else if (index == 1) {
|
|
cm_l3init_usb_otg_ss_clkctrl =
|
|
(*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
|
|
/* Enable 960 MHz clock for dwc3 */
|
|
setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
|
|
OPTFCLKEN_REFCLK960M);
|
|
|
|
/* Enable 32 KHz clock for dwc3 */
|
|
setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
|
|
/* Enable 60 MHz clock for USB2PHY2 */
|
|
setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
|
|
L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
|
|
}
|
|
|
|
u32 const clk_domains_usb[] = {
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_hw_auto_usb[] = {
|
|
(*prcm)->cm_l3init_ocp2scp1_clkctrl,
|
|
cm_l3init_usb_otg_ss_clkctrl,
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_explicit_en_usb[] = {
|
|
0
|
|
};
|
|
|
|
do_enable_clocks(clk_domains_usb,
|
|
clk_modules_hw_auto_usb,
|
|
clk_modules_explicit_en_usb,
|
|
1);
|
|
}
|
|
|
|
void disable_usb_clocks(int index)
|
|
{
|
|
u32 cm_l3init_usb_otg_ss_clkctrl = 0;
|
|
|
|
if (index == 0) {
|
|
cm_l3init_usb_otg_ss_clkctrl =
|
|
(*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
|
|
/* Disable 960 MHz clock for dwc3 */
|
|
clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
|
|
OPTFCLKEN_REFCLK960M);
|
|
|
|
/* Disable 32 KHz clock for USB_PHY1 */
|
|
clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
|
|
/* Disable 32 KHz clock for USB_PHY3 */
|
|
if (is_dra7xx())
|
|
clrbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
} else if (index == 1) {
|
|
cm_l3init_usb_otg_ss_clkctrl =
|
|
(*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
|
|
/* Disable 960 MHz clock for dwc3 */
|
|
clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
|
|
OPTFCLKEN_REFCLK960M);
|
|
|
|
/* Disable 32 KHz clock for dwc3 */
|
|
clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
|
|
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
|
|
|
|
/* Disable 60 MHz clock for USB2PHY2 */
|
|
clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
|
|
L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
|
|
}
|
|
|
|
u32 const clk_domains_usb[] = {
|
|
0
|
|
};
|
|
|
|
u32 const clk_modules_disable[] = {
|
|
(*prcm)->cm_l3init_ocp2scp1_clkctrl,
|
|
cm_l3init_usb_otg_ss_clkctrl,
|
|
0
|
|
};
|
|
|
|
do_disable_clocks(clk_domains_usb,
|
|
clk_modules_disable,
|
|
1);
|
|
}
|
|
#endif
|
|
|
|
const struct ctrl_ioregs ioregs_omap5430 = {
|
|
.ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
|
|
.ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
|
|
.ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
|
|
.ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
|
|
.ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs_omap5432_es1 = {
|
|
.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
|
|
.ctrl_lpddr2ch = 0x0,
|
|
.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
|
|
.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE,
|
|
.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
|
|
.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
|
|
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
|
|
.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs_omap5432_es2 = {
|
|
.ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
|
|
.ctrl_lpddr2ch = 0x0,
|
|
.ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
|
|
.ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2,
|
|
.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
|
|
.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
|
|
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
|
|
.ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs_dra7xx_es1 = {
|
|
.ctrl_ddrch = 0x40404040,
|
|
.ctrl_lpddr2ch = 0x40404040,
|
|
.ctrl_ddr3ch = 0x80808080,
|
|
.ctrl_ddrio_0 = 0x00094A40,
|
|
.ctrl_ddrio_1 = 0x04A52000,
|
|
.ctrl_ddrio_2 = 0x84210000,
|
|
.ctrl_emif_sdram_config_ext = 0x0001C1A7,
|
|
.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
|
|
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs_dra72x_es1 = {
|
|
.ctrl_ddrch = 0x40404040,
|
|
.ctrl_lpddr2ch = 0x40404040,
|
|
.ctrl_ddr3ch = 0x60606080,
|
|
.ctrl_ddrio_0 = 0x00094A40,
|
|
.ctrl_ddrio_1 = 0x04A52000,
|
|
.ctrl_ddrio_2 = 0x84210000,
|
|
.ctrl_emif_sdram_config_ext = 0x0001C1A7,
|
|
.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
|
|
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs_dra72x_es2 = {
|
|
.ctrl_ddrch = 0x40404040,
|
|
.ctrl_lpddr2ch = 0x40404040,
|
|
.ctrl_ddr3ch = 0x60606060,
|
|
.ctrl_ddrio_0 = 0x00094A40,
|
|
.ctrl_ddrio_1 = 0x00000000,
|
|
.ctrl_ddrio_2 = 0x00000000,
|
|
.ctrl_emif_sdram_config_ext = 0x0001C1A7,
|
|
.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
|
|
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
|
|
};
|
|
|
|
void __weak hw_data_init(void)
|
|
{
|
|
u32 omap_rev = omap_revision();
|
|
|
|
switch (omap_rev) {
|
|
|
|
case OMAP5430_ES1_0:
|
|
case OMAP5432_ES1_0:
|
|
*prcm = &omap5_es1_prcm;
|
|
*dplls_data = &omap5_dplls_es1;
|
|
*omap_vcores = &omap5430_volts;
|
|
*ctrl = &omap5_ctrl;
|
|
break;
|
|
|
|
case OMAP5430_ES2_0:
|
|
case OMAP5432_ES2_0:
|
|
*prcm = &omap5_es2_prcm;
|
|
*dplls_data = &omap5_dplls_es2;
|
|
*omap_vcores = &omap5430_volts_es2;
|
|
*ctrl = &omap5_ctrl;
|
|
break;
|
|
|
|
case DRA762_ABZ_ES1_0:
|
|
case DRA762_ACD_ES1_0:
|
|
case DRA762_ES1_0:
|
|
*prcm = &dra7xx_prcm;
|
|
*dplls_data = &dra76x_dplls;
|
|
*ctrl = &dra7xx_ctrl;
|
|
break;
|
|
|
|
case DRA752_ES1_0:
|
|
case DRA752_ES1_1:
|
|
case DRA752_ES2_0:
|
|
*prcm = &dra7xx_prcm;
|
|
*dplls_data = &dra7xx_dplls;
|
|
*ctrl = &dra7xx_ctrl;
|
|
break;
|
|
|
|
case DRA722_ES1_0:
|
|
case DRA722_ES2_0:
|
|
case DRA722_ES2_1:
|
|
*prcm = &dra7xx_prcm;
|
|
*dplls_data = &dra72x_dplls;
|
|
*ctrl = &dra7xx_ctrl;
|
|
break;
|
|
|
|
default:
|
|
printf("\n INVALID OMAP REVISION ");
|
|
}
|
|
}
|
|
|
|
void get_ioregs(const struct ctrl_ioregs **regs)
|
|
{
|
|
u32 omap_rev = omap_revision();
|
|
|
|
switch (omap_rev) {
|
|
case OMAP5430_ES1_0:
|
|
case OMAP5430_ES2_0:
|
|
*regs = &ioregs_omap5430;
|
|
break;
|
|
case OMAP5432_ES1_0:
|
|
*regs = &ioregs_omap5432_es1;
|
|
break;
|
|
case OMAP5432_ES2_0:
|
|
*regs = &ioregs_omap5432_es2;
|
|
break;
|
|
case DRA752_ES1_0:
|
|
case DRA752_ES1_1:
|
|
case DRA752_ES2_0:
|
|
case DRA762_ES1_0:
|
|
case DRA762_ACD_ES1_0:
|
|
case DRA762_ABZ_ES1_0:
|
|
*regs = &ioregs_dra7xx_es1;
|
|
break;
|
|
case DRA722_ES1_0:
|
|
*regs = &ioregs_dra72x_es1;
|
|
break;
|
|
case DRA722_ES2_0:
|
|
case DRA722_ES2_1:
|
|
*regs = &ioregs_dra72x_es2;
|
|
break;
|
|
|
|
default:
|
|
printf("\n INVALID OMAP REVISION ");
|
|
}
|
|
}
|