mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
111 lines
3.1 KiB
C
111 lines
3.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2013 Samsung Electronics
|
|
* Hyungwon Hwang <human.hwang@samsung.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_ODROID_XU3_H
|
|
#define __CONFIG_ODROID_XU3_H
|
|
|
|
#include <configs/exynos5420-common.h>
|
|
#include <configs/exynos5-common.h>
|
|
|
|
#define CONFIG_BOARD_COMMON
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
|
|
/* select serial console configuration */
|
|
|
|
#define TZPC_BASE_OFFSET 0x10000
|
|
|
|
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
|
|
/* Reserve the last 22 MiB for the secure firmware */
|
|
#define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)
|
|
#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
|
|
|
|
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_EHCI_EXYNOS
|
|
|
|
/* DFU */
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
#define DFU_MANIFEST_POLL_TIMEOUT 25000
|
|
|
|
/* THOR */
|
|
#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM
|
|
#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
|
|
|
|
/* UMS */
|
|
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
|
|
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
|
|
|
|
/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
|
|
#undef CONFIG_EXYNOS_TMU
|
|
|
|
#define CONFIG_DFU_ALT_SYSTEM \
|
|
"uImage fat 0 1;" \
|
|
"zImage fat 0 1;" \
|
|
"Image.itb fat 0 1;" \
|
|
"uInitrd fat 0 1;" \
|
|
"boot.scr fat 0 1;" \
|
|
"boot.cmd fat 0 1;" \
|
|
"exynos5422-odroidxu3.dtb fat 0 1;" \
|
|
"exynos5422-odroidxu3-lite.dtb fat 0 1;" \
|
|
"exynos5422-odroidxu4.dtb fat 0 1;" \
|
|
"exynos5422-odroidhc1.dtb fat 0 1;" \
|
|
"boot part 0 1;" \
|
|
"root part 0 2\0"
|
|
|
|
#define CONFIG_DFU_ALT_BOOT_EMMC \
|
|
"u-boot raw 0x3e 0x800 mmcpart 1;" \
|
|
"bl1 raw 0x0 0x1e mmcpart 1;" \
|
|
"bl2 raw 0x1e 0x1d mmcpart 1;" \
|
|
"tzsw raw 0x83e 0x200 mmcpart 1;" \
|
|
"params.bin raw 0x1880 0x20\0"
|
|
|
|
#define CONFIG_DFU_ALT_BOOT_SD \
|
|
"u-boot raw 0x3f 0x800;" \
|
|
"bl1 raw 0x1 0x1e;" \
|
|
"bl2 raw 0x1f 0x1d;" \
|
|
"tzsw raw 0x83f 0x200;" \
|
|
"params.bin raw 0x1880 0x20\0"
|
|
|
|
/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
|
|
#define CONFIG_MISC_COMMON
|
|
#define CONFIG_SET_DFU_ALT_INFO
|
|
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
|
|
|
|
/* Set soc_rev, soc_id, board_rev, board_name, fdtfile */
|
|
#define CONFIG_ODROID_REV_AIN 9
|
|
#define CONFIG_REVISION_TAG
|
|
|
|
/*
|
|
* Need to override existing one (smdk5420) with odroid so set_board_info will
|
|
* use proper prefix when creating full board_name (SYS_BOARD + type)
|
|
*/
|
|
#undef CONFIG_SYS_BOARD
|
|
#define CONFIG_SYS_BOARD "odroid"
|
|
|
|
/* Define new extra env settings, including DFU settings */
|
|
#undef CONFIG_EXTRA_ENV_SETTINGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
EXYNOS_DEVICE_SETTINGS \
|
|
EXYNOS_FDTFILE_SETTING \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
BOOTENV \
|
|
"rootfstype=ext4\0" \
|
|
"console=" CONFIG_DEFAULT_CONSOLE \
|
|
"fdtfile=exynos5422-odroidxu3.dtb\0" \
|
|
"board_name=odroidxu3\0" \
|
|
"mmcbootdev=0\0" \
|
|
"mmcrootdev=0\0" \
|
|
"mmcbootpart=1\0" \
|
|
"mmcrootpart=2\0" \
|
|
"dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \
|
|
"dfu_alt_info=Autoset by THOR/DFU command run.\0"
|
|
|
|
#endif /* __CONFIG_H */
|