mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 21:43:45 +00:00
a0ff7f2eda
Fixes for TRAB board - /board/trab/rs485.c: correct baudrate - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in udelay(); fix some timing problems with adc controller - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power; modify commands: touch and buzzer * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE (quick & dirty workaround for rogue pointer problem in get_vfatname()); Use direct function calls for auto_update instead of hush commands
203 lines
4.5 KiB
C
203 lines
4.5 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* Martin Krause, TQ-Systems GmbH, <martin.krause@tqs.de>
|
|
*
|
|
* Based on cpu/arm920t/serial.c, by Gary Jennejohn
|
|
* (C) Copyright 2002 Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <s3c2400.h>
|
|
#include "rs485.h"
|
|
|
|
static void rs485_setbrg (void);
|
|
static void rs485_cfgio (void);
|
|
static void set_rs485re(unsigned char rs485re_state);
|
|
static void set_rs485de(unsigned char rs485de_state);
|
|
static void rs485_setbrg (void);
|
|
#ifdef NOT_USED
|
|
static void trab_rs485_disable_tx(void);
|
|
static void trab_rs485_disable_rx(void);
|
|
#endif
|
|
|
|
#define UART_NR S3C24X0_UART1
|
|
|
|
/* CPLD-Register for controlling TRAB hardware functions */
|
|
#define CPLD_RS485_RE ((volatile unsigned long *)0x04028000)
|
|
|
|
static void rs485_setbrg (void)
|
|
{
|
|
S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
|
|
int i;
|
|
unsigned int reg = 0;
|
|
|
|
/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
|
|
/* reg = (33000000 / (16 * gd->baudrate)) - 1; */
|
|
reg = (33000000 / (16 * 38400)) - 1;
|
|
|
|
/* FIFO enable, Tx/Rx FIFO clear */
|
|
uart->UFCON = 0x07;
|
|
uart->UMCON = 0x0;
|
|
/* Normal,No parity,1 stop,8 bit */
|
|
uart->ULCON = 0x3;
|
|
/*
|
|
* tx=level,rx=edge,disable timeout int.,enable rx error int.,
|
|
* normal,interrupt or polling
|
|
*/
|
|
uart->UCON = 0x245;
|
|
uart->UBRDIV = reg;
|
|
|
|
for (i = 0; i < 100; i++);
|
|
}
|
|
|
|
static void rs485_cfgio (void)
|
|
{
|
|
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
|
|
|
|
gpio->PFCON &= ~(0x3 << 2);
|
|
gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */
|
|
|
|
gpio->PFCON &= ~(0x3 << 6);
|
|
gpio->PFCON |= (0x2 << 6); /* configure GPF3 as TXD1 */
|
|
|
|
gpio->PFUP |= (1 << 1); /* disable pullup on GPF1 */
|
|
gpio->PFUP |= (1 << 3); /* disable pullup on GPF3 */
|
|
|
|
gpio->PACON &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */
|
|
}
|
|
|
|
/*
|
|
* Initialise the rs485 port with the given baudrate. The settings
|
|
* are always 8 data bits, no parity, 1 stop bit, no start bits.
|
|
*
|
|
*/
|
|
int rs485_init (void)
|
|
{
|
|
rs485_cfgio ();
|
|
rs485_setbrg ();
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Read a single byte from the rs485 port. Returns 1 on success, 0
|
|
* otherwise. When the function is succesfull, the character read is
|
|
* written into its argument c.
|
|
*/
|
|
int rs485_getc (void)
|
|
{
|
|
S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
|
|
|
|
/* wait for character to arrive */
|
|
while (!(uart->UTRSTAT & 0x1));
|
|
|
|
return uart->URXH & 0xff;
|
|
}
|
|
|
|
/*
|
|
* Output a single byte to the rs485 port.
|
|
*/
|
|
void rs485_putc (const char c)
|
|
{
|
|
S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
|
|
|
|
/* wait for room in the tx FIFO */
|
|
while (!(uart->UTRSTAT & 0x2));
|
|
|
|
uart->UTXH = c;
|
|
|
|
/* If \n, also do \r */
|
|
if (c == '\n')
|
|
rs485_putc ('\r');
|
|
}
|
|
|
|
/*
|
|
* Test whether a character is in the RX buffer
|
|
*/
|
|
int rs485_tstc (void)
|
|
{
|
|
S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
|
|
|
|
return uart->UTRSTAT & 0x1;
|
|
}
|
|
|
|
void rs485_puts (const char *s)
|
|
{
|
|
while (*s) {
|
|
rs485_putc (*s++);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* State table:
|
|
* RE DE Result
|
|
* 1 1 XMIT
|
|
* 0 0 RCV
|
|
* 1 0 Shutdown
|
|
*/
|
|
|
|
/* function that controls the receiver enable for the rs485 */
|
|
/* rs485re_state reflects the level (0/1) of the RE pin */
|
|
|
|
static void set_rs485re(unsigned char rs485re_state)
|
|
{
|
|
if(rs485re_state)
|
|
*CPLD_RS485_RE = 0x010000;
|
|
else
|
|
*CPLD_RS485_RE = 0x0;
|
|
}
|
|
|
|
/* function that controls the sender enable for the rs485 */
|
|
/* rs485de_state reflects the level (0/1) of the DE pin */
|
|
|
|
static void set_rs485de(unsigned char rs485de_state)
|
|
{
|
|
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
|
|
|
|
/* This is on PORT A bit 11 */
|
|
if(rs485de_state)
|
|
gpio->PADAT |= (1 << 11);
|
|
else
|
|
gpio->PADAT &= ~(1 << 11);
|
|
}
|
|
|
|
|
|
void trab_rs485_enable_tx(void)
|
|
{
|
|
set_rs485de(1);
|
|
set_rs485re(1);
|
|
}
|
|
|
|
void trab_rs485_enable_rx(void)
|
|
{
|
|
set_rs485re(0);
|
|
set_rs485de(0);
|
|
}
|
|
|
|
#ifdef NOT_USED
|
|
static void trab_rs485_disable_tx(void)
|
|
{
|
|
set_rs485de(0);
|
|
}
|
|
|
|
static void trab_rs485_disable_rx(void)
|
|
{
|
|
set_rs485re(1);
|
|
}
|
|
#endif
|