mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
c837dcb1a3
before we can access it; add delay in case we are faster (with no CF card inserted) * Cleanup of some init functions * Make sure SCC Ethernet is always stopped by the time we boot Linux to avoid Linux crashes by early packets coming in. * Accelerate flash accesses on LWMON board by using buffered writes
348 lines
9.9 KiB
C
348 lines
9.9 KiB
C
/*
|
|
**=====================================================================
|
|
**
|
|
** Copyright (C) 2000, 2001, 2002, 2003
|
|
** The LEOX team <team@leox.org>, http://www.leox.org
|
|
**
|
|
** LEOX.org is about the development of free hardware and software resources
|
|
** for system on chip.
|
|
**
|
|
** Description: U-Boot port on the LEOX's ELPT860 CPU board
|
|
** ~~~~~~~~~~~
|
|
**
|
|
**=====================================================================
|
|
**
|
|
** This program is free software; you can redistribute it and/or
|
|
** modify it under the terms of the GNU General Public License as
|
|
** published by the Free Software Foundation; either version 2 of
|
|
** the License, or (at your option) any later version.
|
|
**
|
|
** This program is distributed in the hope that it will be useful,
|
|
** but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
** GNU General Public License for more details.
|
|
**
|
|
** You should have received a copy of the GNU General Public License
|
|
** along with this program; if not, write to the Free Software
|
|
** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
** MA 02111-1307 USA
|
|
**
|
|
**=====================================================================
|
|
*/
|
|
|
|
/*
|
|
** Note 1: In this file, you have to provide the following functions:
|
|
** ------
|
|
** int board_early_init_f(void)
|
|
** int checkboard(void)
|
|
** long int initdram(int board_type)
|
|
** called from 'board_init_f()' into 'common/board.c'
|
|
**
|
|
** void reset_phy(void)
|
|
** called from 'board_init_r()' into 'common/board.c'
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
const uint init_sdram_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPMA RAM)
|
|
*/
|
|
0x0FFCCC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04,
|
|
0xFFFFFC04, /* last */
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPMA RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, /* last */
|
|
/*
|
|
* Burst Read. (Offset 8 in UPMA RAM)
|
|
*/
|
|
0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, /* last */
|
|
/*
|
|
* Single Write. (Offset 18 in UPMA RAM)
|
|
*/
|
|
0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04,
|
|
0xFFFFFC04, 0xFFFFFC04, 0x0FFFFC04, 0xFFFFFC04, /* last */
|
|
/*
|
|
* Burst Write. (Offset 20 in UPMA RAM)
|
|
*/
|
|
0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC34, 0x0FAC0C34,
|
|
0xFFFFFC05, 0xFFFFFC04, 0x0FFCFC04, 0xFFFFFC05, /* last */
|
|
};
|
|
|
|
const uint sdram_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPMA RAM)
|
|
*/
|
|
0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04,
|
|
0xFF0FFC00, /* last */
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPMA RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC05, /* last */
|
|
/*
|
|
* Burst Read. (Offset 8 in UPMA RAM)
|
|
*/
|
|
0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04,
|
|
0xF00FFC00, 0xF00FFC00, 0xF00FFC00, 0xFF0FFC00,
|
|
0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04,
|
|
0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
|
|
/*
|
|
* Single Write. (Offset 18 in UPMA RAM)
|
|
*/
|
|
0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF0C00,
|
|
0xFF0FFC04, 0x0FFCCC04, 0xFFAFFC05, /* last */
|
|
_NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPMA RAM)
|
|
*/
|
|
0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC00, 0x00AF0C00,
|
|
0xF00FFC00, 0xF00FFC00, 0xF00FFC04, 0x0FFCCC04,
|
|
0xFFAFFC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04,
|
|
0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
|
|
/*
|
|
* Refresh (Offset 30 in UPMA RAM)
|
|
*/
|
|
0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
|
|
0xFFFFFC05, 0xFFFFFC04, 0xFFFFFC05, _NOT_USED_,
|
|
0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
|
|
/*
|
|
* Exception. (Offset 3c in UPMA RAM)
|
|
*/
|
|
0x0FFFFC34, 0x0FAC0C34, 0xFFFFFC05, 0xFFAFFC04, /* last */
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define CFG_PC4 0x0800
|
|
|
|
#define CFG_DS1 CFG_PC4
|
|
|
|
/*
|
|
* Very early board init code (fpga boot, etc.)
|
|
*/
|
|
int board_early_init_f (void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
|
|
|
/*
|
|
* Light up the red led on ELPT860 pcb (DS1) (PCDAT)
|
|
*/
|
|
immr->im_ioport.iop_pcdat &= ~CFG_DS1; /* PCDAT (DS1 = 0) */
|
|
immr->im_ioport.iop_pcpar &= ~CFG_DS1; /* PCPAR (0=general purpose I/O) */
|
|
immr->im_ioport.iop_pcdir |= CFG_DS1; /* PCDIR (I/O: 0=input, 1=output) */
|
|
|
|
return (0); /* success */
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*
|
|
* Test ELPT860 ID string
|
|
*
|
|
* Return 1 if no second DRAM bank, otherwise returns 0
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
unsigned char *s = getenv ("serial#");
|
|
|
|
if (!s || strncmp (s, "ELPT860", 7))
|
|
printf ("### No HW ID - assuming ELPT860\n");
|
|
|
|
return (0); /* success */
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
long int initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size8, size9;
|
|
long int size_b0 = 0;
|
|
|
|
/*
|
|
* This sequence initializes SDRAM chips on ELPT860 board
|
|
*/
|
|
upmconfig (UPMA, (uint *) init_sdram_table,
|
|
sizeof (init_sdram_table) / sizeof (uint));
|
|
|
|
memctl->memc_mptpr = 0x0200;
|
|
memctl->memc_mamr = 0x18002111;
|
|
|
|
memctl->memc_mar = 0x00000088;
|
|
memctl->memc_mcr = 0x80002000; /* CS1: SDRAM bank 0 */
|
|
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh (depends on number of
|
|
* banks): This value is selected for four cycles every 62.4 us
|
|
* with two SDRAM banks or four cycles every 31.2 us with one
|
|
* bank. It will be adjusted after memory sizing.
|
|
*/
|
|
memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
|
|
|
|
/*
|
|
* The following value is used as an address (i.e. opcode) for
|
|
* the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
|
|
* the port size is 32bit the SDRAM does NOT "see" the lower two
|
|
* address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
|
|
* MICRON SDRAMs:
|
|
* -> 0 00 010 0 010
|
|
* | | | | +- Burst Length = 4
|
|
* | | | +----- Burst Type = Sequential
|
|
* | | +------- CAS Latency = 2
|
|
* | +----------- Operating Mode = Standard
|
|
* +-------------- Write Burst Mode = Programmed Burst Length
|
|
*/
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
|
|
* preliminary addresses - these have to be modified after the
|
|
* SDRAM size has been determined.
|
|
*/
|
|
memctl->memc_or1 = CFG_OR1_PRELIM;
|
|
memctl->memc_br1 = CFG_BR1_PRELIM;
|
|
|
|
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mcr = 0x80002105; /* CS1: SDRAM bank 0 */
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80002230; /* CS1: SDRAM bank 0 - execute twice */
|
|
udelay (1);
|
|
|
|
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*
|
|
* try 8 column mode
|
|
*/
|
|
size8 = dram_size (CFG_MAMR_8COL,
|
|
(ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* try 9 column mode
|
|
*/
|
|
size9 = dram_size (CFG_MAMR_9COL,
|
|
(ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
|
|
|
|
if (size8 < size9) { /* leave configuration at 9 columns */
|
|
size_b0 = size9;
|
|
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
|
|
} else { /* back to 8 columns */
|
|
|
|
size_b0 = size8;
|
|
memctl->memc_mamr = CFG_MAMR_8COL;
|
|
udelay (500);
|
|
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
|
|
}
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Adjust refresh rate depending on SDRAM type, both banks
|
|
* For types > 128 MBit leave it at the current (fast) rate
|
|
*/
|
|
if (size_b0 < 0x02000000) {
|
|
/* reduce to 15.6 us (62.4 us / quad) */
|
|
memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
|
|
udelay (1000);
|
|
}
|
|
|
|
/*
|
|
* Final mapping: map bigger bank first
|
|
*/
|
|
memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
|
|
memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
{
|
|
unsigned long reg;
|
|
|
|
/* adjust refresh rate depending on SDRAM type, one bank */
|
|
reg = memctl->memc_mptpr;
|
|
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
|
|
memctl->memc_mptpr = reg;
|
|
}
|
|
|
|
udelay (10000);
|
|
|
|
return (size_b0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int
|
|
dram_size (long int mamr_value, long int *base, long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size (base, maxsize));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define CFG_PA1 0x4000
|
|
#define CFG_PA2 0x2000
|
|
|
|
#define CFG_LBKs (CFG_PA2 | CFG_PA1)
|
|
|
|
void reset_phy (void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
|
|
|
/*
|
|
* Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect
|
|
* and no AUI loopback
|
|
*/
|
|
immr->im_ioport.iop_padat &= ~CFG_LBKs; /* PADAT (LBK eth 1&2 = 0) */
|
|
immr->im_ioport.iop_papar &= ~CFG_LBKs; /* PAPAR (0=general purpose I/O) */
|
|
immr->im_ioport.iop_padir |= CFG_LBKs; /* PADIR (I/O: 0=input, 1=output) */
|
|
}
|