u-boot/board/esd/cpci750/serial.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

73 lines
2.4 KiB
C

/*
* (C) Copyright 2001
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
*
* modified for marvell db64360 eval board by
* Ingo Assmus <ingo.assmus@keymile.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* serial.h - mostly useful for DUART serial_init in serial.c */
#ifndef __SERIAL_H__
#define __SERIAL_H__
#if 0
#define B230400 1
#define B115200 2
#define B57600 4
#define B38400 82
#define B19200 163
#define B9600 24
#define B4800 651
#define B2400 1302
#define B1200 2604
#define B600 5208
#define B300 10417
#define B150 20833
#define B110 28409
#define BDEFAULT B115200
/* this stuff is important to initialize
the DUART channels */
#define Scale 0x01L /* distance between port addresses */
#define COM1 0x000003f8 /* Keyboard */
#define COM2 0x000002f8 /* Host */
/* Port Definitions relative to base COM port addresses */
#define DataIn (0x00*Scale) /* data input port */
#define DataOut (0x00*Scale) /* data output port */
#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */
#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */
#define Ier (0x01*Scale) /* interrupt enable register */
#define Iir (0x02*Scale) /* interrupt identification register */
#define Lcr (0x03*Scale) /* line control register */
#define Mcr (0x04*Scale) /* modem control register */
#define Lsr (0x05*Scale) /* line status register */
#define Msr (0x06*Scale) /* modem status register */
/* Bit Definitions for above ports */
#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */
#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */
#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */
#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */
#define McrDflt (McrRts|McrDtr)
#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/
/* b6: transmitter empty */
#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */
#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */
#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */
#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */
#define IerRda 0xf /* b0: Enable received data available interrupt */
#endif
#endif /* __SERIAL_H__ */