u-boot/board/xilinx/common/xdma_channel.c
wdenk 028ab6b598 * Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform

* Patch by Stephan Linz, 17 Feb 2004:
  Fix watchdog support for NIOS

* Patch by Josh Fryman, 16 Feb 2004:
  Fix byte-swapping for cfi_flash.c for different bus widths

* Patch by Jon Diekema, 14 Jeb 2004:
  Remove duplicate "FPGA Support" notes from the README file
2004-02-23 23:54:43 +00:00

738 lines
22 KiB
C

/******************************************************************************
*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx hardware products are not intended for use in life support
* appliances, devices, or systems. Use in such applications is
* expressly prohibited.
*
*
* (c) Copyright 2002-2004 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* FILENAME:
*
* xdma_channel.c
*
* DESCRIPTION:
*
* This file contains the DMA channel component. This component supports
* a distributed DMA design in which each device can have it's own dedicated
* DMA channel, as opposed to a centralized DMA design. This component
* performs processing for DMA on all devices.
*
* See xdma_channel.h for more information about this component.
*
* NOTES:
*
* None.
*
******************************************************************************/
/***************************** Include Files *********************************/
#include "xdma_channel.h"
#include "xbasic_types.h"
#include "xio.h"
/************************** Constant Definitions *****************************/
/**************************** Type Definitions *******************************/
/***************** Macros (Inline Functions) Definitions *********************/
/************************** Function Prototypes ******************************/
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_Initialize
*
* DESCRIPTION:
*
* This function initializes a DMA channel. This function must be called
* prior to using a DMA channel. Initialization of a channel includes setting
* up the registers base address, and resetting the channel such that it's in a
* known state. Interrupts for the channel are disabled when the channel is
* reset.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* BaseAddress contains the base address of the registers for the DMA channel.
*
* RETURN VALUE:
*
* XST_SUCCESS indicating initialization was successful.
*
* NOTES:
*
* None.
*
******************************************************************************/
XStatus
XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress)
{
/* assert to verify input arguments, don't assert base address */
XASSERT_NONVOID(InstancePtr != NULL);
/* setup the base address of the registers for the DMA channel such
* that register accesses can be done
*/
InstancePtr->RegBaseAddress = BaseAddress;
/* initialize the scatter gather list such that it indicates it has not
* been created yet and the DMA channel is ready to use (initialized)
*/
InstancePtr->GetPtr = NULL;
InstancePtr->PutPtr = NULL;
InstancePtr->CommitPtr = NULL;
InstancePtr->LastPtr = NULL;
InstancePtr->TotalDescriptorCount = 0;
InstancePtr->ActiveDescriptorCount = 0;
InstancePtr->IsReady = XCOMPONENT_IS_READY;
/* initialize the version of the component
*/
XVersion_FromString(&InstancePtr->Version, "1.00a");
/* reset the DMA channel such that it's in a known state and ready
* and indicate the initialization occured with no errors, note that
* the is ready variable must be set before this call or reset will assert
*/
XDmaChannel_Reset(InstancePtr);
return XST_SUCCESS;
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_IsReady
*
* DESCRIPTION:
*
* This function determines if a DMA channel component has been successfully
* initialized such that it's ready to use.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* TRUE if the DMA channel component is ready, FALSE otherwise.
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_IsReady(XDmaChannel * InstancePtr)
{
/* assert to verify input arguments used by the base component */
XASSERT_NONVOID(InstancePtr != NULL);
return InstancePtr->IsReady == XCOMPONENT_IS_READY;
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetVersion
*
* DESCRIPTION:
*
* This function gets the software version for the specified DMA channel
* component.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* A pointer to the software version of the specified DMA channel.
*
* NOTES:
*
* None.
*
******************************************************************************/
XVersion *
XDmaChannel_GetVersion(XDmaChannel * InstancePtr)
{
/* assert to verify input arguments */
XASSERT_NONVOID(InstancePtr != NULL);
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* return a pointer to the version of the DMA channel */
return &InstancePtr->Version;
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_SelfTest
*
* DESCRIPTION:
*
* This function performs a self test on the specified DMA channel. This self
* test is destructive as the DMA channel is reset and a register default is
* verified.
*
* ARGUMENTS:
*
* InstancePtr is a pointer to the DMA channel to be operated on.
*
* RETURN VALUE:
*
* XST_SUCCESS is returned if the self test is successful, or one of the
* following errors.
*
* XST_DMA_RESET_REGISTER_ERROR Indicates the control register value
* after a reset was not correct
*
* NOTES:
*
* This test does not performs a DMA transfer to test the channel because the
* DMA hardware will not currently allow a non-local memory transfer to non-local
* memory (memory copy), but only allows a non-local memory to or from the device
* memory (typically a FIFO).
*
******************************************************************************/
#define XDC_CONTROL_REG_RESET_MASK 0x98000000UL /* control reg reset value */
XStatus
XDmaChannel_SelfTest(XDmaChannel * InstancePtr)
{
u32 ControlReg;
/* assert to verify input arguments */
XASSERT_NONVOID(InstancePtr != NULL);
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* reset the DMA channel such that it's in a known state before the test
* it resets to no interrupts enabled, the desired state for the test
*/
XDmaChannel_Reset(InstancePtr);
/* this should be the first test to help prevent a lock up with the polling
* loop that occurs later in the test, check the reset value of the DMA
* control register to make sure it's correct, return with an error if not
*/
ControlReg = XDmaChannel_GetControl(InstancePtr);
if (ControlReg != XDC_CONTROL_REG_RESET_MASK) {
return XST_DMA_RESET_REGISTER_ERROR;
}
return XST_SUCCESS;
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_Reset
*
* DESCRIPTION:
*
* This function resets the DMA channel. This is a destructive operation such
* that it should not be done while a channel is being used. If the DMA channel
* is transferring data into other blocks, such as a FIFO, it may be necessary
* to reset other blocks. This function does not modify the contents of a
* scatter gather list for a DMA channel such that the user is responsible for
* getting buffer descriptors from the list if necessary.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* None.
*
******************************************************************************/
void
XDmaChannel_Reset(XDmaChannel * InstancePtr)
{
/* assert to verify input arguments */
XASSERT_VOID(InstancePtr != NULL);
XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* reset the DMA channel such that it's in a known state, the reset
* register is self clearing such that it only has to be set
*/
XIo_Out32(InstancePtr->RegBaseAddress + XDC_RST_REG_OFFSET,
XDC_RESET_MASK);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetControl
*
* DESCRIPTION:
*
* This function gets the control register contents of the DMA channel.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* The control register contents of the DMA channel. One or more of the
* following values may be contained the register. Each of the values are
* unique bit masks.
*
* XDC_DMACR_SOURCE_INCR_MASK Increment the source address
* XDC_DMACR_DEST_INCR_MASK Increment the destination address
* XDC_DMACR_SOURCE_LOCAL_MASK Local source address
* XDC_DMACR_DEST_LOCAL_MASK Local destination address
* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable
* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt
* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_GetControl(XDmaChannel * InstancePtr)
{
/* assert to verify input arguments */
XASSERT_NONVOID(InstancePtr != NULL);
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* return the contents of the DMA control register */
return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_SetControl
*
* DESCRIPTION:
*
* This function sets the control register of the specified DMA channel.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* Control contains the value to be written to the control register of the DMA
* channel. One or more of the following values may be contained the register.
* Each of the values are unique bit masks such that they may be ORed together
* to enable multiple bits or inverted and ANDed to disable multiple bits.
*
* XDC_DMACR_SOURCE_INCR_MASK Increment the source address
* XDC_DMACR_DEST_INCR_MASK Increment the destination address
* XDC_DMACR_SOURCE_LOCAL_MASK Local source address
* XDC_DMACR_DEST_LOCAL_MASK Local destination address
* XDC_DMACR_SG_ENABLE_MASK Scatter gather enable
* XDC_DMACR_GEN_BD_INTR_MASK Individual buffer descriptor interrupt
* XDC_DMACR_LAST_BD_MASK Last buffer descriptor in a packet
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* None.
*
******************************************************************************/
void
XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control)
{
/* assert to verify input arguments except the control which can't be
* asserted since all values are valid
*/
XASSERT_VOID(InstancePtr != NULL);
XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* set the DMA control register to the specified value */
XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetStatus
*
* DESCRIPTION:
*
* This function gets the status register contents of the DMA channel.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* The status register contents of the DMA channel. One or more of the
* following values may be contained the register. Each of the values are
* unique bit masks.
*
* XDC_DMASR_BUSY_MASK The DMA channel is busy
* XDC_DMASR_BUS_ERROR_MASK A bus error occurred
* XDC_DMASR_BUS_TIMEOUT_MASK A bus timeout occurred
* XDC_DMASR_LAST_BD_MASK The last buffer descriptor of a packet
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_GetStatus(XDmaChannel * InstancePtr)
{
/* assert to verify input arguments */
XASSERT_NONVOID(InstancePtr != NULL);
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* return the contents of the DMA status register */
return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_SetIntrStatus
*
* DESCRIPTION:
*
* This function sets the interrupt status register of the specified DMA channel.
* Setting any bit of the interrupt status register will clear the bit to
* indicate the interrupt processing has been completed. The definitions of each
* bit in the register match the definition of the bits in the interrupt enable
* register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* Status contains the value to be written to the status register of the DMA
* channel. One or more of the following values may be contained the register.
* Each of the values are unique bit masks such that they may be ORed together
* to enable multiple bits or inverted and ANDed to disable multiple bits.
*
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_BD_MASK A buffer descriptor is done
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* None.
*
******************************************************************************/
void
XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status)
{
/* assert to verify input arguments except the status which can't be
* asserted since all values are valid
*/
XASSERT_VOID(InstancePtr != NULL);
XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* set the interrupt status register with the specified value such that
* all bits which are set in the register are cleared effectively clearing
* any active interrupts
*/
XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetIntrStatus
*
* DESCRIPTION:
*
* This function gets the interrupt status register of the specified DMA channel.
* The interrupt status register indicates which interrupts are active
* for the DMA channel. If an interrupt is active, the status register must be
* set (written) with the bit set for each interrupt which has been processed
* in order to clear the interrupts. The definitions of each bit in the register
* match the definition of the bits in the interrupt enable register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* The interrupt status register contents of the specified DMA channel.
* One or more of the following values may be contained the register.
* Each of the values are unique bit masks.
*
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
* XDC_IXR_BD_MASK A buffer descriptor is done
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr)
{
/* assert to verify input arguments */
XASSERT_NONVOID(InstancePtr != NULL);
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* return the contents of the interrupt status register */
return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_SetIntrEnable
*
* DESCRIPTION:
*
* This function sets the interrupt enable register of the specified DMA
* channel. The interrupt enable register contains bits which enable
* individual interrupts for the DMA channel. The definitions of each bit
* in the register match the definition of the bits in the interrupt status
* register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* Enable contains the interrupt enable register contents to be written
* in the DMA channel. One or more of the following values may be contained
* the register. Each of the values are unique bit masks such that they may be
* ORed together to enable multiple bits or inverted and ANDed to disable
* multiple bits.
*
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_SG_END_MASK Current descriptor was the end of the list
* XDC_IXR_BD_MASK A buffer descriptor is done
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* None.
*
******************************************************************************/
void
XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable)
{
/* assert to verify input arguments except the enable which can't be
* asserted since all values are valid
*/
XASSERT_VOID(InstancePtr != NULL);
XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* set the interrupt enable register to the specified value */
XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetIntrEnable
*
* DESCRIPTION:
*
* This function gets the interrupt enable of the DMA channel. The
* interrupt enable contains flags which enable individual interrupts for the
* DMA channel. The definitions of each bit in the register match the definition
* of the bits in the interrupt status register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* The interrupt enable of the DMA channel. One or more of the following values
* may be contained the register. Each of the values are unique bit masks.
*
* XDC_IXR_DMA_DONE_MASK The dma operation is done
* XDC_IXR_DMA_ERROR_MASK The dma operation had an error
* XDC_IXR_PKT_DONE_MASK A packet is complete
* XDC_IXR_PKT_THRESHOLD_MASK The packet count threshold reached
* XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
* XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
* XDC_IXR_BD_MASK A buffer descriptor is done
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr)
{
/* assert to verify input arguments */
XASSERT_NONVOID(InstancePtr != NULL);
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* return the contents of the interrupt enable register */
return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET);
}
/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_Transfer
*
* DESCRIPTION:
*
* This function starts the DMA channel transferring data from a memory source
* to a memory destination. This function only starts the operation and returns
* before the operation may be complete. If the interrupt is enabled, an
* interrupt will be generated when the operation is complete, otherwise it is
* necessary to poll the channel status to determine when it's complete. It is
* the responsibility of the caller to determine when the operation is complete
* by handling the generated interrupt or polling the status. It is also the
* responsibility of the caller to ensure that the DMA channel is not busy with
* another transfer before calling this function.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* SourcePtr contains a pointer to the source memory where the data is to
* be tranferred from and must be 32 bit aligned.
*
* DestinationPtr contains a pointer to the destination memory where the data
* is to be transferred and must be 32 bit aligned.
*
* ByteCount contains the number of bytes to transfer during the DMA operation.
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* The DMA h/w will not currently allow a non-local memory transfer to non-local
* memory (memory copy), but only allows a non-local memory to or from the device
* memory (typically a FIFO).
*
* It is the responsibility of the caller to ensure that the cache is
* flushed and invalidated both before and after the DMA operation completes
* if the memory pointed to is cached. The caller must also ensure that the
* pointers contain a physical address rather than a virtual address
* if address translation is being used.
*
******************************************************************************/
void
XDmaChannel_Transfer(XDmaChannel * InstancePtr,
u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount)
{
/* assert to verify input arguments and the alignment of any arguments
* which have expected alignments
*/
XASSERT_VOID(InstancePtr != NULL);
XASSERT_VOID(SourcePtr != NULL);
XASSERT_VOID(((u32) SourcePtr & 3) == 0);
XASSERT_VOID(DestinationPtr != NULL);
XASSERT_VOID(((u32) DestinationPtr & 3) == 0);
XASSERT_VOID(ByteCount != 0);
XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
/* setup the source and destination address registers for the transfer */
XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET,
(u32) SourcePtr);
XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET,
(u32) DestinationPtr);
/* start the DMA transfer to copy from the source buffer to the
* destination buffer by writing the length to the length register
*/
XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount);
}