mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
8bde7f776c
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
198 lines
5.9 KiB
Text
198 lines
5.9 KiB
Text
|
|
/*------------------------------------------------------*/
|
|
/* TERON Articia / SDRAM Init */
|
|
/*------------------------------------------------------*/
|
|
|
|
* XD_CTL = 0x81000000 (0x74)
|
|
|
|
* HBUS_ACC_CTL_0 &= 0xFFFFFDFF (0x5c)
|
|
/* host bus access ctl reg 2(5e) */
|
|
/* set - CPU read from memory data one clock after data is latched */
|
|
|
|
* GLOBL_INFO_0 |= 0x00004000 (0x50)
|
|
/* global info register 2 (52), AGP/PCI bus 1 arbiter is addressed in Articia S */
|
|
|
|
PCI_1_SB_CONFIG_0 |= 0x00000400 (0x80d0)
|
|
/* PCI1 side band config reg 2 (d2), enable read acces while write buffer not empty */
|
|
|
|
MEM_RAS_CTL_0 |= 0x3f000000 (0xcc)
|
|
&= 0x3fffffff
|
|
/* RAS park control reg 0(cc), park access enable is set */
|
|
|
|
HOST_RDBUF_CTL |= 0x10000000 (0x70)
|
|
&= 0x10ffffff
|
|
/* host read buffer control reg, enable prefetch for CPU read from DRAM control */
|
|
|
|
HBUS_ACC_CTL_0 |= 0x0100001f (0x5c)
|
|
&= 0xf1ffffff
|
|
/* host bus access control register, enable CPU address bus pipe control */
|
|
/* two outstanding requests, *** changed to 2 from 3 */
|
|
/* enable line merge write control for CPU write to system memory, PCI 1 */
|
|
/* and PCI 0 bus memory; enable page merge write control for write to */
|
|
/* PCI bus 0 & bus 1 memory */
|
|
|
|
SRAM_CTL |= 0x00004000 (0xc8)
|
|
&= 0xffbff7ff
|
|
/* DRAM detail timing control register 1 (ca), bit 3 set to 0 */
|
|
/* DRAM start access latency control - wait for one clock */
|
|
/* ff9f changed to ffbf */
|
|
|
|
DIM0_TIM_CTL_0 = 0x737d737d (0xc9)
|
|
/* DRAM timing control for dimm0 & dimm1; set wait one clock */
|
|
/* cycle for next data access */
|
|
|
|
DIM2_TIM_CTL_0 = 0x737d737d (0xca)
|
|
/* DRAM timing control for dimm2 & dimm3; set wait one clock */
|
|
/* cycle for next data access */
|
|
|
|
DIM0_BNK0_CTL_0 = BNK0_RAM_SIZ_128MB (0x90)
|
|
/* set dimm0 bank0 for 128 MB */
|
|
|
|
DIM0_BNK1_CTL_0 = BNK1_RAM_SIZ_128MB (0x94)
|
|
/* set dimm0 for bank1 */
|
|
|
|
DIM0_TIM_CTL_0 = 0xf3bf0000 (0xc9)
|
|
/* dimm0 timing control register; RAS - CAS latency - 4 clock */
|
|
/* CAS access latency - 3 wait; pre-charge latency - 3 wait */
|
|
/* pre-charge command period control - 5 clock; wait one clock */
|
|
/* cycle for next data access; read to write access latency control */
|
|
/* - 2 clock cycles */
|
|
|
|
DRAM_GBL_CTL_0 |= 0x00000100 (0xc0)
|
|
&= 0xffff01ff
|
|
/* memory global control register - support buffer sdram on bank 0 */
|
|
|
|
DRAM_ECC_CTL_0 |= 0x00260000 (0xc4)
|
|
&= 0xff26ffff
|
|
/* enable ECC; enable read, modify, write control */
|
|
|
|
DRAM_REF_CTL_0 = DRAM_REF_DATA (0xb8)
|
|
/* set DRAM refresh parameters *** changed to 00940100 */
|
|
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
DRAM_ECC_CTL_0 |= 0x20243280 (0xc4)
|
|
/* turn off ecc */
|
|
/* for SDRAM bank 0 */
|
|
|
|
DRAM_ECC_CTL_0 |= 0x20243290 (0xc4) ?
|
|
/* for SDRAM bank 1 */
|
|
|
|
|
|
/* Additional Stuff...*/
|
|
|
|
GLOBL_CTRL |= 0x20000b00 (0x54)
|
|
|
|
PCI_0_SB_CONFIG |= 0x04100007 (0xd0)
|
|
/* PCI 0 Side band config reg*/
|
|
|
|
0x8000083c |= 0x00080000
|
|
/* Disable VGA decode on PCI Bus 1 */
|
|
|
|
|
|
/*End Additional Stuff..*/
|
|
|
|
/*--------------------------------------------------------------*/
|
|
/* TERON serial port initialization code */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
0x84380080 |= 0x00030000
|
|
/* enable super IO configuration VIA chip Register 85 */
|
|
/* Enable super I/O config mode */
|
|
|
|
0xfe0003f0 = 0xe2
|
|
bl delay1
|
|
|
|
0xfe0003f1 = 0x0f
|
|
bl delay1
|
|
/* enable com1 & com2, parallel port disabled */
|
|
|
|
0xfe0003f0 = 0xe7
|
|
bl delay1
|
|
/* let's make com1 base as 0x3f8 */
|
|
|
|
0xfe0003f1 = 0xfe
|
|
bl delay1
|
|
|
|
0xfe0003f0 = 0xe8
|
|
bl delay1
|
|
/* let's make com2 base as 0x2f8 */
|
|
|
|
0xfe0003f1 = 0xbe
|
|
|
|
0x84380080 &= 0xfffdffff
|
|
/* closing super IO configuration VIA chip Register 85 */
|
|
|
|
|
|
/* -------------------------------*/
|
|
|
|
0xfe0003fb = 0x83
|
|
bl delay1
|
|
/*latch enable word length -8 bit */ /* set mslab bit */
|
|
0xfe0003f8 = 0x0c
|
|
bl delay1
|
|
/* set baud rate lsb for 9600 baud */
|
|
0xfe0003f9 = 0x0
|
|
bl delay1
|
|
/* set baud rate msb for 9600 baud */
|
|
0xfe0003fb = 0x03
|
|
bl delay1
|
|
/* reset mslab */
|
|
|
|
/*--------------------------------------------------------------*/
|
|
/* END TERON Serial Port Initialization Code */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
|
|
/*--------------------------------------------------------------*/
|
|
/* END TERON Articia / SDRAM Initialization code */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
Proposed from Documentation:
|
|
|
|
write dmem 0xfec00cf8 0x50000080
|
|
write dmem 0xfee00cfc 0xc0305411
|
|
|
|
Writes to index 0x50-0x53.
|
|
0x50: Global Information Register 0
|
|
0xC0 = Little Endian CPU, Sequential order Burst
|
|
0x51: Global Information Register 1
|
|
Read only, 0x30 = Provides PowerPC and X86 support
|
|
0x52: Global Information Register 2
|
|
0x05 = 64/128 bit CPU bus support
|
|
0x53: Global Information Register 3
|
|
0x80 = PCI Bus 0 grant active time is 1 clock after REQ# deasserted
|
|
|
|
write dmem 0xfec00cf8 0x5c000080
|
|
write dmem 0xfee00cfc 0xb300011F
|
|
|
|
write dmem 0xfec00cf8 0xc8000080
|
|
write dmem 0xfee00cfc 0x0020f100
|
|
|
|
write dmem 0xfec00cf8 0x90000080
|
|
write dmem 0xfee00cfc 0x007fe700
|
|
|
|
write dmem 0xfec00cf8 0x9400080
|
|
write dmem 0xfee00cfc 0x007fe700
|
|
|
|
write dmem 0xfec00cf8 0xb0000080
|
|
write dmem 0xfee00cfc 0x737d737d
|
|
|
|
write dmem 0xfec00cf8 0xb4000080
|
|
write dmem 0xfee00cfc 0x737d737d
|
|
|
|
write dmem 0xfec00cf8 0xc0000080
|
|
write dmem 0xfee00cfc 0x40005500
|
|
|
|
write dmem 0xfec00cf8 0xb8000080
|
|
write dmem 0xfee00cfc 0x00940100
|
|
|
|
write dmem 0xfec00cf8 0xc4000080
|
|
write dmem 0xfee00cfc 0x00003280
|
|
|
|
write dmem 0xfec00cf8 0xc4000080
|
|
write dmem 0xfee00cfc 0x00003290
|