mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
e08b5b1465
Add DM support for Freescale PowerPC sata driver used for PowerPC T series SoCs, CONFIG_BLK needs to be enabled on these platforms. It adds the SATA controller as AHCI device, which is strictly speaking not correct, as the controller is not AHCI compatible, But the U-Boot AHCI uclass interface enables the usage of this DM driver, Also fix below warning while PowerPC T series boards compilation, ===================== WARNING ======================" This board does use CONFIG_LIBATA but has CONFIG_AHCI not" enabled. Please update the storage controller driver to use" CONFIG_AHCI before the v2019.07 release." Failure to update by the deadline may result in board removal." See doc/driver-model/MIGRATION.txt for more info." ====================================================" Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
332 lines
9.6 KiB
C
332 lines
9.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2007-2008 Freescale Semiconductor, Inc.
|
|
* Copyright 2019 NXP
|
|
* Author: Dave Liu <daveliu@freescale.com>
|
|
*/
|
|
|
|
#ifndef __FSL_SATA_H__
|
|
#define __FSL_SATA_H__
|
|
|
|
#define SATA_HC_MAX_NUM 4 /* Max host controller numbers */
|
|
#define SATA_HC_MAX_CMD 16 /* Max command queue depth per host controller */
|
|
#define SATA_HC_MAX_PORT 16 /* Max port number per host controller */
|
|
|
|
/*
|
|
* SATA Host Controller Registers
|
|
*/
|
|
typedef struct fsl_sata_reg {
|
|
/* SATA command registers */
|
|
u32 cqr; /* Command queue register */
|
|
u8 res1[0x4];
|
|
u32 car; /* Command active register */
|
|
u8 res2[0x4];
|
|
u32 ccr; /* Command completed register */
|
|
u8 res3[0x4];
|
|
u32 cer; /* Command error register */
|
|
u8 res4[0x4];
|
|
u32 der; /* Device error register */
|
|
u32 chba; /* Command header base address */
|
|
u32 hstatus; /* Host status register */
|
|
u32 hcontrol; /* Host control register */
|
|
u32 cqpmp; /* Port number queue register */
|
|
u32 sig; /* Signature register */
|
|
u32 icc; /* Interrupt coalescing control register */
|
|
u8 res5[0xc4];
|
|
|
|
/* SATA supperset registers */
|
|
u32 sstatus; /* SATA interface status register */
|
|
u32 serror; /* SATA interface error register */
|
|
u32 scontrol; /* SATA interface control register */
|
|
u32 snotification; /* SATA interface notification register */
|
|
u8 res6[0x30];
|
|
|
|
/* SATA control status registers */
|
|
u32 transcfg; /* Transport layer configuration */
|
|
u32 transstatus; /* Transport layer status */
|
|
u32 linkcfg; /* Link layer configuration */
|
|
u32 linkcfg1; /* Link layer configuration1 */
|
|
u32 linkcfg2; /* Link layer configuration2 */
|
|
u32 linkstatus; /* Link layer status */
|
|
u32 linkstatus1; /* Link layer status1 */
|
|
u32 phyctrlcfg; /* PHY control configuration */
|
|
u8 res7[0x2b0];
|
|
|
|
/* SATA system control registers */
|
|
u32 syspr; /* System priority register - big endian */
|
|
u8 res8[0xbec];
|
|
} __attribute__ ((packed)) fsl_sata_reg_t;
|
|
|
|
/* HStatus register
|
|
*/
|
|
#define HSTATUS_ONOFF 0x80000000 /* Online/offline status */
|
|
#define HSTATUS_FORCE_OFFLINE 0x40000000 /* In process going offline */
|
|
#define HSTATUS_BIST_ERR 0x20000000
|
|
|
|
/* Fatal error */
|
|
#define HSTATUS_MASTER_ERR 0x00004000
|
|
#define HSTATUS_DATA_UNDERRUN 0x00002000
|
|
#define HSTATUS_DATA_OVERRUN 0x00001000
|
|
#define HSTATUS_CRC_ERR_TX 0x00000800
|
|
#define HSTATUS_CRC_ERR_RX 0x00000400
|
|
#define HSTATUS_FIFO_OVERFLOW_TX 0x00000200
|
|
#define HSTATUS_FIFO_OVERFLOW_RX 0x00000100
|
|
#define HSTATUS_FATAL_ERR_ALL (HSTATUS_MASTER_ERR | \
|
|
HSTATUS_DATA_UNDERRUN | \
|
|
HSTATUS_DATA_OVERRUN | \
|
|
HSTATUS_CRC_ERR_TX | \
|
|
HSTATUS_CRC_ERR_RX | \
|
|
HSTATUS_FIFO_OVERFLOW_TX | \
|
|
HSTATUS_FIFO_OVERFLOW_RX)
|
|
/* Interrupt status */
|
|
#define HSTATUS_FATAL_ERR 0x00000020
|
|
#define HSTATUS_PHY_RDY 0x00000010
|
|
#define HSTATUS_SIGNATURE 0x00000008
|
|
#define HSTATUS_SNOTIFY 0x00000004
|
|
#define HSTATUS_DEVICE_ERR 0x00000002
|
|
#define HSTATUS_CMD_COMPLETE 0x00000001
|
|
|
|
/* HControl register
|
|
*/
|
|
#define HCONTROL_ONOFF 0x80000000 /* Online or offline request */
|
|
#define HCONTROL_FORCE_OFFLINE 0x40000000 /* Force offline request */
|
|
#define HCONTROL_ENTERPRISE_EN 0x10000000 /* Enterprise mode enabled */
|
|
#define HCONTROL_HDR_SNOOP 0x00000400 /* Command header snoop */
|
|
#define HCONTROL_PMP_ATTACHED 0x00000200 /* Port multiplier attached */
|
|
|
|
/* Interrupt enable */
|
|
#define HCONTROL_FATAL_ERR 0x00000020
|
|
#define HCONTROL_PHY_RDY 0x00000010
|
|
#define HCONTROL_SIGNATURE 0x00000008
|
|
#define HCONTROL_SNOTIFY 0x00000004
|
|
#define HCONTROL_DEVICE_ERR 0x00000002
|
|
#define HCONTROL_CMD_COMPLETE 0x00000001
|
|
|
|
#define HCONTROL_INT_EN_ALL (HCONTROL_FATAL_ERR | \
|
|
HCONTROL_PHY_RDY | \
|
|
HCONTROL_SIGNATURE | \
|
|
HCONTROL_SNOTIFY | \
|
|
HCONTROL_DEVICE_ERR | \
|
|
HCONTROL_CMD_COMPLETE)
|
|
|
|
/* SStatus register
|
|
*/
|
|
#define SSTATUS_IPM_MASK 0x00000780
|
|
#define SSTATUS_IPM_NOPRESENT 0x00000000
|
|
#define SSTATUS_IPM_ACTIVE 0x00000080
|
|
#define SSTATUS_IPM_PATIAL 0x00000100
|
|
#define SSTATUS_IPM_SLUMBER 0x00000300
|
|
|
|
#define SSTATUS_SPD_MASK 0x000000f0
|
|
#define SSTATUS_SPD_GEN1 0x00000010
|
|
#define SSTATUS_SPD_GEN2 0x00000020
|
|
|
|
#define SSTATUS_DET_MASK 0x0000000f
|
|
#define SSTATUS_DET_NODEVICE 0x00000000
|
|
#define SSTATUS_DET_DISCONNECT 0x00000001
|
|
#define SSTATUS_DET_CONNECT 0x00000003
|
|
#define SSTATUS_DET_PHY_OFFLINE 0x00000004
|
|
|
|
/* SControl register
|
|
*/
|
|
#define SCONTROL_SPM_MASK 0x0000f000
|
|
#define SCONTROL_SPM_GO_PARTIAL 0x00001000
|
|
#define SCONTROL_SPM_GO_SLUMBER 0x00002000
|
|
#define SCONTROL_SPM_GO_ACTIVE 0x00004000
|
|
|
|
#define SCONTROL_IPM_MASK 0x00000f00
|
|
#define SCONTROL_IPM_NO_RESTRICT 0x00000000
|
|
#define SCONTROL_IPM_PARTIAL 0x00000100
|
|
#define SCONTROL_IPM_SLUMBER 0x00000200
|
|
#define SCONTROL_IPM_PART_SLUM 0x00000300
|
|
|
|
#define SCONTROL_SPD_MASK 0x000000f0
|
|
#define SCONTROL_SPD_NO_RESTRICT 0x00000000
|
|
#define SCONTROL_SPD_GEN1 0x00000010
|
|
#define SCONTROL_SPD_GEN2 0x00000020
|
|
|
|
#define SCONTROL_DET_MASK 0x0000000f
|
|
#define SCONTROL_DET_HRESET 0x00000001
|
|
#define SCONTROL_DET_DISABLE 0x00000004
|
|
|
|
/* TransCfg register
|
|
*/
|
|
#define TRANSCFG_DFIS_SIZE_SHIFT 16
|
|
#define TRANSCFG_RX_WATER_MARK_MASK 0x0000001f
|
|
|
|
/* PhyCtrlCfg register
|
|
*/
|
|
#define PHYCTRLCFG_FPRFTI_MASK 0x00000018
|
|
#define PHYCTRLCFG_LOOPBACK_MASK 0x0000000e
|
|
|
|
/*
|
|
* Command Header Entry
|
|
*/
|
|
typedef struct cmd_hdr_entry {
|
|
__le32 cda; /* Command Descriptor Address,
|
|
4 bytes aligned */
|
|
__le32 prde_fis_len; /* Number of PRD entries and FIS length */
|
|
__le32 ttl; /* Total transfer length */
|
|
__le32 attribute; /* the attribute of command */
|
|
} __attribute__ ((packed)) cmd_hdr_entry_t;
|
|
|
|
#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry)
|
|
|
|
/* cda
|
|
*/
|
|
#define CMD_HDR_CDA_ALIGN 4
|
|
|
|
/* prde_fis_len
|
|
*/
|
|
#define CMD_HDR_PRD_ENTRY_SHIFT 16
|
|
#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000
|
|
#define CMD_HDR_FIS_LEN_SHIFT 2
|
|
|
|
/* attribute
|
|
*/
|
|
#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */
|
|
#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */
|
|
#define CMD_HDR_ATTR_SNOOP 0x00000200 /* Snoop enable for all descriptor */
|
|
#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */
|
|
#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */
|
|
#define CMD_HDR_ATTR_BIST 0x00000040 /* BIST - require the host to enter BIST mode */
|
|
#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */
|
|
#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */
|
|
|
|
/* command type
|
|
*/
|
|
enum cmd_type {
|
|
CMD_VENDOR_BIST,
|
|
CMD_BIST,
|
|
CMD_RESET, /* SRST or device reset */
|
|
CMD_ATAPI,
|
|
CMD_NCQ,
|
|
CMD_ATA, /* None of all above */
|
|
};
|
|
|
|
/*
|
|
* Command Header Table
|
|
*/
|
|
typedef struct cmd_hdr_tbl {
|
|
cmd_hdr_entry_t cmd_slot[SATA_HC_MAX_CMD];
|
|
} __attribute__ ((packed)) cmd_hdr_tbl_t;
|
|
|
|
#define SATA_HC_CMD_HDR_TBL_SIZE sizeof(struct cmd_hdr_tbl)
|
|
#define SATA_HC_CMD_HDR_TBL_ALIGN 4
|
|
|
|
/*
|
|
* PRD entry - Physical Region Descriptor entry
|
|
*/
|
|
typedef struct prd_entry {
|
|
__le32 dba; /* Data base address, 4 bytes aligned */
|
|
u32 res1;
|
|
u32 res2;
|
|
__le32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */
|
|
} __attribute__ ((packed)) prd_entry_t;
|
|
|
|
#define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry)
|
|
|
|
/* dba
|
|
*/
|
|
#define PRD_ENTRY_DBA_ALIGN 4
|
|
|
|
/* ext_c_ddc
|
|
*/
|
|
#define PRD_ENTRY_EXT 0x80000000 /* extension flag */
|
|
#ifdef CONFIG_FSL_SATA_V2
|
|
#define PRD_ENTRY_DATA_SNOOP 0x10000000 /* Data snoop enable */
|
|
#else
|
|
#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Data snoop enable */
|
|
#endif
|
|
#define PRD_ENTRY_LEN_MASK 0x003fffff /* Data word count */
|
|
|
|
#define PRD_ENTRY_MAX_XFER_SZ (PRD_ENTRY_LEN_MASK + 1)
|
|
|
|
/*
|
|
* This SATA host controller supports a max of 16 direct PRD entries, but if use
|
|
* chained indirect PRD entries, then the contollers supports upto a max of 63
|
|
* entries including direct and indirect PRD entries.
|
|
* The PRDT is an array of 63 PRD entries contigiously, but the PRD entries#15
|
|
* will be setup as an indirect descriptor, pointing to it's next (contigious)
|
|
* PRD entries#16.
|
|
*/
|
|
#define SATA_HC_MAX_PRD 63 /* Max PRD entry numbers per command */
|
|
#define SATA_HC_MAX_PRD_DIRECT 16 /* Direct PRDT entries */
|
|
#define SATA_HC_MAX_PRD_USABLE (SATA_HC_MAX_PRD - 1)
|
|
#define SATA_HC_MAX_XFER_LEN 0x4000000
|
|
|
|
/*
|
|
* PRDT - Physical Region Descriptor Table
|
|
*/
|
|
typedef struct prdt {
|
|
prd_entry_t prdt[SATA_HC_MAX_PRD];
|
|
} __attribute__ ((packed)) prdt_t;
|
|
|
|
/*
|
|
* Command Descriptor
|
|
*/
|
|
#define SATA_HC_CMD_DESC_CFIS_SIZE 32 /* bytes */
|
|
#define SATA_HC_CMD_DESC_SFIS_SIZE 32 /* bytes */
|
|
#define SATA_HC_CMD_DESC_ACMD_SIZE 16 /* bytes */
|
|
#define SATA_HC_CMD_DESC_RES 16 /* bytes */
|
|
|
|
typedef struct cmd_desc {
|
|
u8 cfis[SATA_HC_CMD_DESC_CFIS_SIZE];
|
|
u8 sfis[SATA_HC_CMD_DESC_SFIS_SIZE];
|
|
u8 acmd[SATA_HC_CMD_DESC_ACMD_SIZE];
|
|
u8 res[SATA_HC_CMD_DESC_RES];
|
|
prd_entry_t prdt[SATA_HC_MAX_PRD];
|
|
} __attribute__ ((packed)) cmd_desc_t;
|
|
|
|
#define SATA_HC_CMD_DESC_SIZE sizeof(struct cmd_desc)
|
|
#define SATA_HC_CMD_DESC_ALIGN 4
|
|
|
|
/*
|
|
* SATA device driver info
|
|
*/
|
|
typedef struct fsl_sata_info {
|
|
u32 sata_reg_base;
|
|
u32 flags;
|
|
} fsl_sata_info_t;
|
|
|
|
#define FLAGS_DMA 0x00000000
|
|
#define FLAGS_FPDMA 0x00000001
|
|
|
|
/*
|
|
* SATA device driver struct
|
|
*/
|
|
typedef struct fsl_sata {
|
|
char name[12];
|
|
fsl_sata_reg_t *reg_base; /* the base address of controller register */
|
|
void *cmd_hdr_tbl_offset; /* alloc address of command header table */
|
|
cmd_hdr_tbl_t *cmd_hdr; /* aligned address of command header table */
|
|
void *cmd_desc_offset; /* alloc address of command descriptor */
|
|
cmd_desc_t *cmd_desc; /* aligned address of command descriptor */
|
|
int link; /* PHY link status */
|
|
/* device attribute */
|
|
int ata_device_type; /* device type */
|
|
int lba48;
|
|
int queue_depth; /* Max NCQ queue depth */
|
|
u16 pio;
|
|
u16 mwdma;
|
|
u16 udma;
|
|
int wcache;
|
|
int flush;
|
|
int flush_ext;
|
|
u32 dma_flag;
|
|
} fsl_sata_t;
|
|
|
|
#define READ_CMD 0
|
|
#define WRITE_CMD 1
|
|
|
|
#if CONFIG_IS_ENABLED(BLK)
|
|
struct fsl_ata_priv {
|
|
u32 base;
|
|
u32 flag;
|
|
u32 number;
|
|
u32 offset;
|
|
fsl_sata_t *fsl_sata;
|
|
};
|
|
#endif
|
|
|
|
#endif /* __FSL_SATA_H__ */
|