mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
a68256074f
Commitf3729ba6e7("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") switched the watchdog to CONFIG_WATCHDOG. But this is not compatible with the 8xx because it starts the watchdog HW timer at reset and must be serviced from the very beginning including while U-boot is executed in the firmware before relocation in RAM. Select CONFIG_HW_WATCHDOG and make hw_watchdog_reset() visible. Meanwhile, finalise the cleanup of arch/powerpc/cpu/mpc8xx/Kconfig by removing the lines put in comment in that commit, and also remove again the selection of CONFIG_MPC8xx_WATCHDOG which was removed by that commit and brought back by mistake by commitb3134ffbd9("watchdog: Kconfig: Sort entry alphabetically") Note that there was an 'imply WATCHDOG' in the original commit but it disappeared in the Kconfig alphabetical sorting, so no need to remove it here. Fixes:f3729ba6e7("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") Fixes:b3134ffbd9("watchdog: Kconfig: Sort entry alphabetically") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Roese <sr@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
175 lines
3.1 KiB
Text
175 lines
3.1 KiB
Text
menu "mpc8xx CPU"
|
|
depends on MPC8xx
|
|
|
|
config SYS_CPU
|
|
default "mpc8xx"
|
|
|
|
choice
|
|
prompt "Target select"
|
|
optional
|
|
|
|
config TARGET_MCR3000
|
|
bool "Support MCR3000 board from CSSI"
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "CPU select"
|
|
default MPC866
|
|
|
|
config MPC866
|
|
bool "MPC866"
|
|
|
|
config MPC885
|
|
bool "MPC885"
|
|
|
|
endchoice
|
|
|
|
config 8xx_GCLK_FREQ
|
|
int "CPU GCLK Frequency"
|
|
|
|
comment "Specific commands"
|
|
|
|
config CMD_IMMAP
|
|
bool "Enable various commands to dump IMMR information"
|
|
help
|
|
This enables various commands such as:
|
|
|
|
siuinfo - print System Interface Unit (SIU) registers
|
|
memcinfo - print Memory Controller registers
|
|
|
|
comment "Configuration Registers"
|
|
|
|
config SYS_SIUMCR
|
|
hex "SIUMCR register"
|
|
help
|
|
SIU Module Configuration (11-6)
|
|
|
|
config SYS_SYPCR
|
|
hex "SYPCR register"
|
|
help
|
|
System Protection Control (11-9)
|
|
|
|
config SYS_TBSCR
|
|
hex "TBSCR register"
|
|
help
|
|
Time Base Status and Control (11-26)
|
|
|
|
config SYS_PISCR
|
|
hex "PISCR register"
|
|
help
|
|
Periodic Interrupt Status and Control (11-31)
|
|
|
|
config SYS_PLPRCR_BOOL
|
|
bool "Customise PLPRCR"
|
|
|
|
config SYS_PLPRCR
|
|
hex "PLPRCR register"
|
|
depends on SYS_PLPRCR_BOOL
|
|
help
|
|
PLL, Low-Power, and Reset Control Register (15-30)
|
|
|
|
config SYS_SCCR
|
|
hex "SCCR register"
|
|
help
|
|
System Clock and reset Control Register (15-27)
|
|
|
|
config SYS_SCCR_MASK
|
|
hex "MASK for setting SCCR register"
|
|
|
|
config SYS_DER
|
|
hex "DER register"
|
|
help
|
|
Debug Event Register (37-47)
|
|
|
|
comment "Memory mapping"
|
|
|
|
config SYS_BR0_PRELIM
|
|
hex "Preliminary value for BR0"
|
|
|
|
config SYS_OR0_PRELIM
|
|
hex "Preliminary value for OR0"
|
|
|
|
config SYS_BR1_PRELIM_BOOL
|
|
bool "Define Bank 1"
|
|
|
|
config SYS_BR1_PRELIM
|
|
hex "Preliminary value for BR1"
|
|
depends on SYS_BR1_PRELIM_BOOL
|
|
|
|
config SYS_OR1_PRELIM
|
|
hex "Preliminary value for OR1"
|
|
depends on SYS_BR1_PRELIM_BOOL
|
|
|
|
config SYS_BR2_PRELIM_BOOL
|
|
bool "Define Bank 2"
|
|
|
|
config SYS_BR2_PRELIM
|
|
hex "Preliminary value for BR2"
|
|
depends on SYS_BR2_PRELIM_BOOL
|
|
|
|
config SYS_OR2_PRELIM
|
|
hex "Preliminary value for OR2"
|
|
depends on SYS_BR2_PRELIM_BOOL
|
|
|
|
config SYS_BR3_PRELIM_BOOL
|
|
bool "Define Bank 3"
|
|
|
|
config SYS_BR3_PRELIM
|
|
hex "Preliminary value for BR3"
|
|
depends on SYS_BR3_PRELIM_BOOL
|
|
|
|
config SYS_OR3_PRELIM
|
|
hex "Preliminary value for OR3"
|
|
depends on SYS_BR3_PRELIM_BOOL
|
|
|
|
config SYS_BR4_PRELIM_BOOL
|
|
bool "Define Bank 4"
|
|
|
|
config SYS_BR4_PRELIM
|
|
hex "Preliminary value for BR4"
|
|
depends on SYS_BR4_PRELIM_BOOL
|
|
|
|
config SYS_OR4_PRELIM
|
|
hex "Preliminary value for OR4"
|
|
depends on SYS_BR4_PRELIM_BOOL
|
|
|
|
config SYS_BR5_PRELIM_BOOL
|
|
bool "Define Bank 5"
|
|
|
|
config SYS_BR5_PRELIM
|
|
hex "Preliminary value for BR5"
|
|
depends on SYS_BR5_PRELIM_BOOL
|
|
|
|
config SYS_OR5_PRELIM
|
|
hex "Preliminary value for OR5"
|
|
depends on SYS_BR5_PRELIM_BOOL
|
|
|
|
config SYS_BR6_PRELIM_BOOL
|
|
bool "Define Bank 6"
|
|
|
|
config SYS_BR6_PRELIM
|
|
hex "Preliminary value for BR6"
|
|
depends on SYS_BR6_PRELIM_BOOL
|
|
|
|
config SYS_OR6_PRELIM
|
|
hex "Preliminary value for OR6"
|
|
depends on SYS_BR6_PRELIM_BOOL
|
|
|
|
config SYS_BR7_PRELIM_BOOL
|
|
bool "Define Bank 7"
|
|
|
|
config SYS_BR7_PRELIM
|
|
hex "Preliminary value for BR7"
|
|
depends on SYS_BR7_PRELIM_BOOL
|
|
|
|
config SYS_OR7_PRELIM
|
|
hex "Preliminary value for OR7"
|
|
depends on SYS_BR7_PRELIM_BOOL
|
|
|
|
config SYS_IMMR
|
|
hex "Value for IMMR"
|
|
|
|
source "board/cssi/MCR3000/Kconfig"
|
|
|
|
endmenu
|