mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
52caf2c12b
It is not recommended to have aliases for gpio. In past it was used in Linux for assigning numbers via sysfs which is deprecated and libgpiod should be used instead. In U-Boot this number is used for seq number but gpio offset are not counted from this number. That's why having these aliases only for seq number is not needed. As is done in Linux it is the best to use full gpio name instead of sequence number which depends on sequence in binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
484 lines
12 KiB
Text
484 lines
12 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* dts file for Xilinx Versal a2197 RevA System Controller
|
|
*
|
|
* (C) Copyright 2019, Xilinx, Inc.
|
|
*
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "zynqmp.dtsi"
|
|
#include "zynqmp-clk-ccf.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Versal System Controller on a2197 Memory Char board RevA";
|
|
compatible = "xlnx,zynqmp-m-a2197-03-revA", "xlnx,zynqmp-a2197-revA",
|
|
"xlnx,zynqmp-a2197", "xlnx,zynqmp";
|
|
|
|
aliases {
|
|
ethernet0 = &gem0;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
mmc0 = &sdhci0;
|
|
mmc1 = &sdhci1;
|
|
nvmem0 = &eeprom;
|
|
rtc0 = &rtc;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &dcc;
|
|
usb0 = &usb0;
|
|
usb1 = &usb1;
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */
|
|
};
|
|
|
|
ina226-vcc-aux {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&vcc_aux 0>, <&vcc_aux 1>, <&vcc_aux 2>, <&vcc_aux 3>;
|
|
};
|
|
ina226-vcc-ram {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
|
|
};
|
|
ina226-vcc1v1-lp4 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
|
|
};
|
|
ina226-vcc1v2-lp4 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&vcc1v2_lp4 0>, <&vcc1v2_lp4 1>, <&vcc1v2_lp4 2>, <&vcc1v2_lp4 3>;
|
|
};
|
|
ina226-vdd1-1v8-lp4 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&vdd1_1v8_lp4 0>, <&vdd1_1v8_lp4 1>, <&vdd1_1v8_lp4 2>, <&vdd1_1v8_lp4 3>;
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
is-dual = <1>;
|
|
flash@0 {
|
|
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <108000000>;
|
|
};
|
|
};
|
|
|
|
&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */
|
|
status = "okay";
|
|
non-removable;
|
|
disable-wp;
|
|
bus-width = <8>;
|
|
xlnx,mio-bank = <0>; /* FIXME tap delay */
|
|
};
|
|
|
|
&uart0 { /* uart0 MIO38-39 */
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 { /* uart1 MIO40-41 */
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci1 { /* sd1 MIO45-51 cd in place */
|
|
status = "disable";
|
|
no-1-8-v;
|
|
disable-wp;
|
|
xlnx,mio-bank = <1>;
|
|
};
|
|
|
|
&gem0 {
|
|
status = "okay";
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "sgmii";
|
|
phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
|
|
phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
status = "okay";
|
|
gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */
|
|
"N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */
|
|
"SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
|
|
"EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
|
|
"EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
|
|
"", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */
|
|
"", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
|
|
"LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
|
|
"UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
|
|
"SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
|
|
"SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
|
|
"USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
|
|
"USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
|
|
"USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
|
|
"USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
|
|
"USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
|
|
"", "", "", "", "", /* 78 - 79 */
|
|
"", "", "", "", "", /* 80 - 84 */
|
|
"", "", "", "", "", /* 85 -89 */
|
|
"", "", "", "", "", /* 90 - 94 */
|
|
"", "", "", "", "", /* 95 - 99 */
|
|
"", "", "", "", "", /* 100 - 104 */
|
|
"", "", "", "", "", /* 105 - 109 */
|
|
"", "", "", "", "", /* 110 - 114 */
|
|
"", "", "", "", "", /* 115 - 119 */
|
|
"", "", "", "", "", /* 120 - 124 */
|
|
"", "", "", "", "", /* 125 - 129 */
|
|
"", "", "", "", "", /* 130 - 134 */
|
|
"", "", "", "", "", /* 135 - 139 */
|
|
"", "", "", "", "", /* 140 - 144 */
|
|
"", "", "", "", "", /* 145 - 149 */
|
|
"", "", "", "", "", /* 150 - 154 */
|
|
"", "", "", "", "", /* 155 - 159 */
|
|
"", "", "", "", "", /* 160 - 164 */
|
|
"", "", "", "", "", /* 165 - 169 */
|
|
"", "", "", ""; /* 170 - 174 */
|
|
};
|
|
|
|
&i2c0 { /* MIO 34-35 - can't stay here */
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
i2c-mux@74 { /* u46 */
|
|
compatible = "nxp,pca9548";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x74>;
|
|
/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
|
|
i2c@0 { /* PMBUS must be enabled via SW21 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
reg_vcc1v2_lp4: tps544@15 { /* u97 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x15>;
|
|
};
|
|
reg_vcc1v1_lp4: tps544@16 { /* u95 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x16>;
|
|
};
|
|
reg_vdd1_1v8_lp4: tps544@17 { /* u99 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x17>;
|
|
};
|
|
/* UTIL_PMBUS connection */
|
|
reg_vcc1v8: tps544@13 { /* u92 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x13>;
|
|
};
|
|
reg_vcc3v3: tps544@14 { /* u93 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x14>;
|
|
};
|
|
reg_vcc5v0: tps544@1e { /* u94 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x1e>;
|
|
};
|
|
reg_vpp_2v5_ddr4: tps544@1x { /* u3007 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x17>; /* FIXME wrong in schematics */
|
|
};
|
|
};
|
|
i2c@1 { /* PMBUS_INA226 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
vcc_aux: ina226@42 { /* u86 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-vcc-aux";
|
|
reg = <0x42>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
vcc_ram: ina226@43 { /* u81 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-vcc-ram";
|
|
reg = <0x43>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
vcc1v1_lp4: ina226@46 { /* u96 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-vcc1v1-lp4";
|
|
reg = <0x46>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
vcc1v2_lp4: ina226@47 { /* u98 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-vcc1v2-lp4";
|
|
reg = <0x47>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
vdd1_1v8_lp4: ina226@48 { /* u100 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-vdd1-1v8-lp4";
|
|
reg = <0x48>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
};
|
|
i2c@2 { /* PMBUS1 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
reg_vccint: tps53681@c0 { /* u69 */
|
|
compatible = "ti,tps53681", "ti,tps53679";
|
|
reg = <0xc0>;
|
|
};
|
|
reg_vcc_pmc: tps544@7 { /* u80 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x7>;
|
|
};
|
|
reg_vcc_ram: tps544@8 { /* u82 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x8>;
|
|
};
|
|
reg_vcc_pslp: tps544@9 { /* u83 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x9>;
|
|
};
|
|
reg_vcc_psfp: tps544@a { /* u84 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0xa>;
|
|
};
|
|
reg_vccaux: tps544@d { /* u85 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0xd>;
|
|
};
|
|
reg_vccaux_pmc: tps544@e { /* u87 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0xe>;
|
|
};
|
|
reg_vcco_500: tps544@f { /* u88 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0xf>;
|
|
};
|
|
reg_vcco_501: tps544@10 { /* u89 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x10>;
|
|
};
|
|
reg_vcco_502: tps544@11 { /* u90 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x11>;
|
|
};
|
|
reg_vcco_503: tps544@12 { /* u91 */
|
|
compatible = "ti,tps544b25";
|
|
reg = <0x12>;
|
|
};
|
|
};
|
|
i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* reg = <3>; */
|
|
};
|
|
i2c@4 { /* LP_I2C_SM */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
/* connected to U20G */
|
|
};
|
|
i2c@5 { /* DDR4_SODIMM */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* TODO sysctrl via J239 */
|
|
/* TODO samtec J212G/H via J242 */
|
|
/* TODO teensy via U30 PCA9543A bus 1 */
|
|
&i2c1 { /* i2c1 MIO 36-37 */
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
/* Must be enabled via J242 */
|
|
eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
|
|
compatible = "atmel,24c02";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
i2c-mux@74 { /* u47 */
|
|
compatible = "nxp,pca9548";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x74>;
|
|
/* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */
|
|
dc_i2c: i2c@0 { /* DC_I2C */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
/* Use for storing information about SC board */
|
|
eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */
|
|
compatible = "atmel,24c08";
|
|
reg = <0x54>;
|
|
};
|
|
si570_ref_clk: clock-generator@5d { /* u26 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x5d>; /* FIXME addr */
|
|
temperature-stability = <50>;
|
|
factory-fout = <33333333>;
|
|
clock-frequency = <33333333>;
|
|
clock-output-names = "REF_CLK"; /* FIXME */
|
|
silabs,skip-recall;
|
|
};
|
|
/* Connection via Samtec U20D */
|
|
/* Use for storing information about X-PRC card */
|
|
x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
|
|
compatible = "atmel,24c02";
|
|
reg = <0x52>;
|
|
};
|
|
|
|
/* Use for setting up certain features on X-PRC card */
|
|
x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
|
|
compatible = "nxp,pca9534";
|
|
reg = <0x22>;
|
|
gpio-controller; /* IRQ not connected */
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
|
|
"", "", "", "";
|
|
gtr_sel0 {
|
|
gpio-hog;
|
|
gpios = <0 0>;
|
|
input; /* FIXME add meaning */
|
|
line-name = "sw4_1";
|
|
};
|
|
gtr_sel1 {
|
|
gpio-hog;
|
|
gpios = <1 0>;
|
|
input; /* FIXME add meaning */
|
|
line-name = "sw4_2";
|
|
};
|
|
gtr_sel2 {
|
|
gpio-hog;
|
|
gpios = <2 0>;
|
|
input; /* FIXME add meaning */
|
|
line-name = "sw4_3";
|
|
};
|
|
gtr_sel3 {
|
|
gpio-hog;
|
|
gpios = <3 0>;
|
|
input; /* FIXME add meaning */
|
|
line-name = "sw4_4";
|
|
};
|
|
};
|
|
};
|
|
i2c@2 { /* C0_DDR4 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
si570_c0_ddr4: clock-generator@55 { /* u4 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x55>;
|
|
temperature-stability = <50>;
|
|
factory-fout = <30000000>;
|
|
clock-frequency = <30000000>;
|
|
clock-output-names = "C0_DD4_SI570_CLK";
|
|
};
|
|
};
|
|
i2c@3 { /* C1_SODIMM */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
si570_c1_lp4: clock-generator@55 { /* u7 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x55>;
|
|
temperature-stability = <50>;
|
|
factory-fout = <30000000>;
|
|
clock-frequency = <30000000>;
|
|
clock-output-names = "C1_SODIMM_SI570_CLK";
|
|
};
|
|
};
|
|
i2c@4 { /* C2_QDRIV */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
si570_c2_lp4: clock-generator@55 { /* u10 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x55>;
|
|
temperature-stability = <50>;
|
|
factory-fout = <30000000>;
|
|
clock-frequency = <30000000>;
|
|
clock-output-names = "C2_QDRIV_SI570_CLK";
|
|
};
|
|
};
|
|
i2c@5 { /* C3_DDR4 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
si570_c3_lp4: clock-generator@55 { /* u15 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x55>;
|
|
temperature-stability = <50>;
|
|
factory-fout = <30000000>;
|
|
clock-frequency = <30000000>;
|
|
clock-output-names = "C3_LP4_SI570_CLK";
|
|
};
|
|
};
|
|
i2c@6 { /* HSDP_SI570 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6>;
|
|
si570_hsdp: clock-generator@5d { /* u19 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x5d>;
|
|
temperature-stability = <50>;
|
|
factory-fout = <156250000>;
|
|
clock-frequency = <156250000>;
|
|
clock-output-names = "HSDP_SI570";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
xlnx,usb-polarity = <0>;
|
|
xlnx,usb-reset-mode = <0>;
|
|
};
|
|
|
|
&dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
/* dr_mode = "peripheral"; */
|
|
maximum-speed = "high-speed";
|
|
};
|
|
|
|
&usb1 {
|
|
status = "disabled"; /* not at mem board */
|
|
xlnx,usb-polarity = <0>;
|
|
xlnx,usb-reset-mode = <0>;
|
|
};
|
|
|
|
&dwc3_1 {
|
|
/delete-property/ phy-names ;
|
|
/delete-property/ phys ;
|
|
maximum-speed = "high-speed";
|
|
snps,dis_u2_susphy_quirk ;
|
|
snps,dis_u3_susphy_quirk ;
|
|
status = "disabled";
|
|
};
|