mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
0cc2a07879
Add support PHYTEC phyCORE-i.MX8MM SOM. Supported features: - 2GB LPDDR4 RAM - 1x 1Gbit Ethernet - eMMC - external SD - debug UART3 - watchdog - i2c eeprom Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
259 lines
6.8 KiB
Text
259 lines
6.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH
|
|
* Author: Teresa Remmet <t.remmet@phytec.de>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
#include "imx8mm.dtsi"
|
|
|
|
/ {
|
|
model = "PHYTEC phyCORE-i.MX8MM";
|
|
compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
|
|
|
|
chosen {
|
|
stdout-patch = &uart3;
|
|
};
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VSD_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <100>;
|
|
off-on-delay-us = <12000>;
|
|
};
|
|
};
|
|
|
|
/* ethernet */
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <ðphy0>;
|
|
phy-reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
|
phy-reset-duration = <1>;
|
|
phy-reset-post-delay = <1>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
|
|
enet-phy-lane-no-swap;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* i2c eeprom */
|
|
&i2c1 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
|
scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
|
|
sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
|
|
/* M24C32-D */
|
|
i2c_eeprom: eeprom@51 {
|
|
compatible = "atmel,24c32";
|
|
reg = <0x51>;
|
|
u-boot,i2c-offset-len = <2>;
|
|
};
|
|
|
|
/* M24C32-D Identification page */
|
|
i2c_eeprom_id: eeprom@59 {
|
|
compatible = "atmel,24c32";
|
|
reg = <0x59>;
|
|
u-boot,i2c-offset-len = <2>;
|
|
};
|
|
};
|
|
|
|
/* debug console */
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* sd-card */
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
|
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* eMMC */
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
/* watchdog */
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
|
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
|
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
|
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
|
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
|
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
|
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
|
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
|
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
|
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
|
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
|
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
|
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
|
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
|
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1_gpio: i2c1grp-gpio {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x1c3
|
|
MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x1c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
|
|
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_gpio: usdhc2grpgpio {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
|
>;
|
|
};
|
|
};
|