Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 03:08:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/ls1021aqds/ls1021aqds.c
Yao Yuan bca11bd7c3 ls1021aqds: add hwconfig setting to do pin mux 
The Freescale LS1021AQDS share some pins, so Add the hwconfig option
that allows the user to choose which the function he wants.

The main pin mux IP is:
eSDHC, SAI, IIC2, RGMII, CAN, SAI.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-11 09:40:32 -08:00

422 lines
8.5 KiB
C
Raw Blame History

/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/pcie_layerscape.h>
#include <hwconfig.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
#include <fsl_sec.h>
#include <spl.h>
#include "../common/qixis.h"
#include "ls1021aqds_qixis.h"
#ifdef CONFIG_U_QE
#include "../../../drivers/qe/qe.h"
#endif
#define PIN_MUX_SEL_CAN 0x03
#define PIN_MUX_SEL_IIC2 0xa0
#define PIN_MUX_SEL_RGMII 0x00
#define PIN_MUX_SEL_SAI 0x0c
#define PIN_MUX_SEL_SDHC 0x00
#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0x0f) | value)
#define SET_EC_MUX_SEL(reg, value) ((reg & 0xf0) | value)
DECLARE_GLOBAL_DATA_PTR;
enum {
MUX_TYPE_CAN,
MUX_TYPE_IIC2,
MUX_TYPE_RGMII,
MUX_TYPE_SAI,
MUX_TYPE_SDHC,
MUX_TYPE_SD_PCI4,
MUX_TYPE_SD_PC_SA_SG_SG,
MUX_TYPE_SD_PC_SA_PC_SG,
MUX_TYPE_SD_PC_SG_SG,
};
int checkboard(void)
{
#ifndef CONFIG_QSPI_BOOT
char buf[64];
#endif
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
u8 sw;
#endif
puts("Board: LS1021AQDS\n");
#ifdef CONFIG_SD_BOOT
puts("SD\n");
#elif CONFIG_QSPI_BOOT
puts("QSPI\n");
#else
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
if (sw < 0x8)
printf("vBank: %d\n", sw);
else if (sw == 0x8)
puts("PromJet\n");
else if (sw == 0x9)
puts("NAND\n");
else if (sw == 0x15)
printf("IFCCard\n");
else
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
#endif
#ifndef CONFIG_QSPI_BOOT
printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
QIXIS_READ(id), QIXIS_READ(arch));
printf("FPGA: v%d (%s), build %d\n",
(int)QIXIS_READ(scver), qixis_read_tag(buf),
(int)qixis_read_minor());
#endif
return 0;
}
unsigned long get_board_sys_clk(void)
{
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
switch (sysclk_conf & 0x0f) {
case QIXIS_SYSCLK_64:
return 64000000;
case QIXIS_SYSCLK_83:
return 83333333;
case QIXIS_SYSCLK_100:
return 100000000;
case QIXIS_SYSCLK_125:
return 125000000;
case QIXIS_SYSCLK_133:
return 133333333;
case QIXIS_SYSCLK_150:
return 150000000;
case QIXIS_SYSCLK_160:
return 160000000;
case QIXIS_SYSCLK_166:
return 166666666;
}
return 66666666;
}
unsigned long get_board_ddr_clk(void)
{
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
switch ((ddrclk_conf & 0x30) >> 4) {
case QIXIS_DDRCLK_100:
return 100000000;
case QIXIS_DDRCLK_125:
return 125000000;
case QIXIS_DDRCLK_133:
return 133333333;
}
return 66666666;
}
int select_i2c_ch_pca9547(u8 ch)
{
int ret;
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
}
return 0;
}
int dram_init(void)
{
/*
* When resuming from deep sleep, the I2C channel may not be
* in the default channel. So, switch to the default channel
* before accessing DDR SPD.
*/
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
gd->ram_size = initdram(0);
return 0;
}
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{CONFIG_SYS_FSL_ESDHC_ADDR},
};
int board_mmc_init(bd_t *bis)
{
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
#endif
int board_early_init_f(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
#ifdef CONFIG_TSEC_ENET
out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
#endif
#ifdef CONFIG_FSL_IFC
init_early_memctl_regs();
#endif
#ifdef CONFIG_FSL_QSPI
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
/* Workaround for the issue that DDR could not respond to
* barrier transaction which is generated by executing DSB/ISB
* instruction. Set CCI-400 control override register to
* terminate the barrier transaction. After DDR is initialized,
* allow barrier transaction to DDR again */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
return 0;
}
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong dummy)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
#ifdef CONFIG_NAND_BOOT
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
u32 porsr1, pinctl;
/*
* There is LS1 SoC issue where NOR, FPGA are inaccessible during
* NAND boot because IFC signals > IFC_AD7 are not enabled.
* This workaround changes RCW source to make all signals enabled.
*/
porsr1 = in_be32(&gur->porsr1);
pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) |
DCFG_CCSR_PORSR1_RCW_SRC_I2C);
out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
pinctl);
#endif
/* Set global data pointer */
gd = &gdata;
/* Clear the BSS */
memset(__bss_start, 0, __bss_end - __bss_start);
#ifdef CONFIG_FSL_IFC
init_early_memctl_regs();
#endif
get_clocks();
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init_all();
#endif
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
dram_init();
board_init_r(NULL, 0);
}
#endif
int config_board_mux(int ctrl_type)
{
u8 reg12, reg14;
reg12 = QIXIS_READ(brdcfg[12]);
reg14 = QIXIS_READ(brdcfg[14]);
switch (ctrl_type) {
case MUX_TYPE_CAN:
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
break;
case MUX_TYPE_IIC2:
reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2);
break;
case MUX_TYPE_RGMII:
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
break;
case MUX_TYPE_SAI:
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
break;
case MUX_TYPE_SDHC:
reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC);
break;
case MUX_TYPE_SD_PCI4:
reg12 = 0x38;
break;
case MUX_TYPE_SD_PC_SA_SG_SG:
reg12 = 0x01;
break;
case MUX_TYPE_SD_PC_SA_PC_SG:
reg12 = 0x01;
break;
case MUX_TYPE_SD_PC_SG_SG:
reg12 = 0x21;
break;
default:
printf("Wrong mux interface type\n");
return -1;
}
QIXIS_WRITE(brdcfg[12], reg12);
QIXIS_WRITE(brdcfg[14], reg14);
return 0;
}
int config_serdes_mux(void)
{
struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_FSL_GUTS_ADDR;
u32 cfg;
cfg = in_be32(&gur->rcwsr[4]) & RCWSR4_SRDS1_PRTCL_MASK;
cfg >>= RCWSR4_SRDS1_PRTCL_SHIFT;
switch (cfg) {
case 0x0:
config_board_mux(MUX_TYPE_SD_PCI4);
break;
case 0x30:
config_board_mux(MUX_TYPE_SD_PC_SA_SG_SG);
break;
case 0x60:
config_board_mux(MUX_TYPE_SD_PC_SG_SG);
break;
case 0x70:
config_board_mux(MUX_TYPE_SD_PC_SA_PC_SG);
break;
default:
printf("SRDS1 prtcl:0x%x\n", cfg);
break;
}
return 0;
}
int misc_init_r(void)
{
int conflict_flag;
/* some signals can not enable simultaneous*/
conflict_flag = 0;
if (hwconfig("sdhc"))
conflict_flag++;
if (hwconfig("iic2"))
conflict_flag++;
if (conflict_flag > 1) {
printf("WARNING: pin conflict !\n");
return 0;
}
conflict_flag = 0;
if (hwconfig("rgmii"))
conflict_flag++;
if (hwconfig("can"))
conflict_flag++;
if (hwconfig("sai"))
conflict_flag++;
if (conflict_flag > 1) {
printf("WARNING: pin conflict !\n");
return 0;
}
if (hwconfig("can"))
config_board_mux(MUX_TYPE_CAN);
else if (hwconfig("rgmii"))
config_board_mux(MUX_TYPE_RGMII);
else if (hwconfig("sai"))
config_board_mux(MUX_TYPE_SAI);
if (hwconfig("iic2"))
config_board_mux(MUX_TYPE_IIC2);
else if (hwconfig("sdhc"))
config_board_mux(MUX_TYPE_SDHC);
#ifdef CONFIG_FSL_CAAM
return sec_init();
#endif
return 0;
}
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
/* Set CCI-400 control override register to
* enable barrier transaction */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
/*
* Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register
* All transactions are treated as non-shareable
*/
out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
#ifndef CONFIG_SYS_FSL_NO_SERDES
fsl_serdes_init();
config_serdes_mux();
#endif
#ifdef CONFIG_U_QE
u_qe_init();
#endif
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCIE_LAYERSCAPE
ft_pcie_setup(blob, bd);
#endif
return 0;
}
u8 flash_read8(void *addr)
{
return __raw_readb(addr + 1);
}
void flash_write16(u16 val, void *addr)
{
u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
__raw_writew(shftval, addr);
}
u16 flash_read16(void *addr)
{
u16 val = __raw_readw(addr);
return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
}
Reference in a new issue View git blame Copy permalink