mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
135 lines
3.9 KiB
C
135 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (c) 2012 Michael Walle
|
|
* Michael Walle <michael@walle.cc>
|
|
*/
|
|
|
|
#ifndef _CONFIG_LSXL_H
|
|
#define _CONFIG_LSXL_H
|
|
|
|
/*
|
|
* Version number information
|
|
*/
|
|
#if defined(CONFIG_LSCHLV2)
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
|
|
#define CONFIG_MACH_TYPE 3006
|
|
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
|
|
#elif defined(CONFIG_LSXHL)
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
|
|
#define CONFIG_MACH_TYPE 2663
|
|
/* CONFIG_SYS_TCLK is 200000000 by default */
|
|
#else
|
|
#error "unknown board"
|
|
#endif
|
|
|
|
/*
|
|
* General configuration options
|
|
*/
|
|
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
|
#define CONFIG_KW88F6281 /* SOC Name */
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
|
|
|
#define CONFIG_KIRKWOOD_GPIO
|
|
|
|
/*
|
|
* Commands configuration
|
|
*/
|
|
|
|
/*
|
|
* mv-common.h should be defined after CMD configs since it used them
|
|
* to enable certain macros
|
|
*/
|
|
#include "mv-common.h"
|
|
|
|
/* loading initramfs images without uimage header */
|
|
|
|
/*
|
|
* Environment variables configurations
|
|
*/
|
|
#ifdef CONFIG_SPI_FLASH
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 8
|
|
#endif
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_LOADADDR 0x00800000
|
|
|
|
#if defined(CONFIG_LSXHL)
|
|
#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
|
|
#elif defined(CONFIG_LSCHLV2)
|
|
#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
|
|
#else
|
|
#error "Unsupported board"
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootsource=legacy\0" \
|
|
"hdpart=0:1\0" \
|
|
"kernel_addr=0x00800000\0" \
|
|
"ramdisk_addr=0x01000000\0" \
|
|
"fdt_addr=0x00ff0000\0" \
|
|
"bootcmd_legacy=sata init " \
|
|
"&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
|
|
"&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
|
|
"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
|
|
"&& tftpboot ${ramdisk_addr} initrd.img " \
|
|
"&& setenv ramdisk_len ${filesize} " \
|
|
"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
|
|
"&& bootz ${kernel_addr} " \
|
|
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
|
|
"bootcmd_hdd=sata init " \
|
|
"&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \
|
|
"&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \
|
|
"&& setenv ramdisk_len ${filesize} " \
|
|
"&& load sata ${hdpart} ${fdt_addr} /dtb " \
|
|
"&& bootz ${kernel_addr} " \
|
|
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
|
|
"bootcmd_usb=usb start " \
|
|
"&& load usb 0:1 ${kernel_addr} /vmlinuz " \
|
|
"&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
|
|
"&& setenv ramdisk_len ${filesize} " \
|
|
"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
|
|
"&& bootz ${kernel_addr} " \
|
|
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
|
|
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
|
|
"eraseenv=sf probe 0 " \
|
|
"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
|
|
" +" __stringify(CONFIG_ENV_SIZE) "\0" \
|
|
"config_nc_dhcp=setenv autoload_old ${autoload}; " \
|
|
"setenv autoload no " \
|
|
"&& bootp " \
|
|
"&& setenv ncip " \
|
|
"&& setenv autoload ${autoload_old}; " \
|
|
"setenv autoload_old\0" \
|
|
"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
|
|
"setenv ncip; setenv gatewayip; setenv ethact; " \
|
|
"setenv bootfile; setenv dnsip; " \
|
|
"setenv bootsource legacy; run ser\0" \
|
|
"restore_env=run standard_env; saveenv; reset\0" \
|
|
"ser=setenv stdin serial; setenv stdout serial; " \
|
|
"setenv stderr serial\0" \
|
|
"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0"
|
|
|
|
/*
|
|
* Ethernet Driver configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
|
|
#define CONFIG_PHY_BASE_ADR 7
|
|
#undef CONFIG_RESET_PHY_R
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
#ifdef CONFIG_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_SYS_64BIT_LBA
|
|
#define CONFIG_LBA48
|
|
#endif
|
|
|
|
#endif /* _CONFIG_LSXL_H */
|