mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
92 lines
2.4 KiB
C
92 lines
2.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2014
|
|
* Texas Instruments Incorporated.
|
|
* Felipe Balbi <balbi@ti.com>
|
|
*
|
|
* Configuration settings for the TI Beagle x15 board.
|
|
* See ti_omap5_common.h for omap5 common settings.
|
|
*/
|
|
|
|
#ifndef __CONFIG_AM57XX_EVM_H
|
|
#define __CONFIG_AM57XX_EVM_H
|
|
|
|
#include <environment/ti/dfu.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#define CONFIG_IODELAY_RECALIBRATION
|
|
|
|
/* MMC ENV related defines */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* eMMC */
|
|
#define CONFIG_SYS_MMC_ENV_PART 0
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M
|
|
|
|
#define CONSOLEDEV "ttyS2"
|
|
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
|
|
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
|
|
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
|
|
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
#define CONFIG_SYS_OMAP_ABE_SYSCK
|
|
|
|
#ifdef CONFIG_SPL_DFU
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define DFUARGS \
|
|
"dfu_bufsiz=0x10000\0" \
|
|
DFU_ALT_INFO_MMC \
|
|
DFU_ALT_INFO_EMMC \
|
|
DFU_ALT_INFO_RAM \
|
|
DFU_ALT_INFO_QSPI
|
|
#else
|
|
#undef CONFIG_CMD_BOOTD
|
|
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
|
|
#define DFUARGS \
|
|
"dfu_bufsiz=0x10000\0" \
|
|
DFU_ALT_INFO_RAM
|
|
#endif
|
|
#endif
|
|
|
|
#include <configs/ti_omap5_common.h>
|
|
|
|
/* Enhance our eMMC support / experience. */
|
|
#define CONFIG_HSMMC2_8BIT
|
|
|
|
/* CPSW Ethernet */
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
|
|
|
|
/* USB xHCI HOST */
|
|
#define CONFIG_USB_XHCI_OMAP
|
|
|
|
#define CONFIG_OMAP_USB3PHY1_HOST
|
|
|
|
/* SATA */
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
|
|
|
/*
|
|
* Default to using SPI for environment, etc.
|
|
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
|
|
* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
|
|
* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
|
|
* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
|
|
* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
|
|
* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
|
|
* 0x9E0000 - 0x2000000 : USERLAND
|
|
*/
|
|
#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
|
|
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
|
|
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
|
|
|
|
/* SPI SPL */
|
|
|
|
#endif /* __CONFIG_AM57XX_EVM_H */
|