u-boot/board/omicron/calimain/calimain.c
Tom Rini 01abae4d04 Remove various unused interrupt related code
With d53ecad92f some unused interrupt related code was removed.
However all of these options are currently unused.  Rather than migrate
some of these options to Kconfig we just remove the code in question.

The only related code changes here are that in some cases we use
CONFIG_STACKSIZE in non-IRQ related context.  In these cases we rename
and move the value local to the code in question.

Fixes: d53ecad92f ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-06 20:42:18 -04:00

145 lines
3.2 KiB
C

/*
* Copyright (C) 2011 OMICRON electronics GmbH
*
* Based on da850evm.c. Original Copyrights follow:
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <net.h>
#include <netdev.h>
#include <watchdog.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
#include <asm/ti-common/davinci_nand.h>
#include <asm/arch/emac_defs.h>
#include <asm/arch/pinmux_defs.h>
#include <asm/arch/davinci_misc.h>
#include <asm/arch/timer_defs.h>
DECLARE_GLOBAL_DATA_PTR;
#define CALIMAIN_HWVERSION_MASK 0x7f000000
#define CALIMAIN_HWVERSION_SHIFT 24
/* Hardware version pinmux settings */
const struct pinmux_config hwversion_pins[] = {
{ pinmux(16), 8, 2 }, /* GP7[15] */
{ pinmux(16), 8, 3 }, /* GP7[14] */
{ pinmux(16), 8, 4 }, /* GP7[13] */
{ pinmux(16), 8, 5 }, /* GP7[12] */
{ pinmux(16), 8, 6 }, /* GP7[11] */
{ pinmux(16), 8, 7 }, /* GP7[10] */
{ pinmux(17), 8, 0 }, /* GP7[9] */
{ pinmux(17), 8, 1 } /* GP7[8] */
};
const struct pinmux_resource pinmuxes[] = {
PINMUX_ITEM(uart2_pins_txrx),
PINMUX_ITEM(emac_pins_mii),
PINMUX_ITEM(emac_pins_mdio),
PINMUX_ITEM(emifa_pins_nor),
PINMUX_ITEM(emifa_pins_cs2),
PINMUX_ITEM(emifa_pins_cs3),
};
const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
const struct lpsc_resource lpsc[] = {
{ DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
{ DAVINCI_LPSC_EMAC }, /* image download */
{ DAVINCI_LPSC_UART2 }, /* console */
{ DAVINCI_LPSC_GPIO },
};
const int lpsc_size = ARRAY_SIZE(lpsc);
/* read board revision from GPIO7[8..14] */
u32 get_board_rev(void)
{
lpsc_on(DAVINCI_LPSC_GPIO);
if (davinci_configure_pin_mux(hwversion_pins,
ARRAY_SIZE(hwversion_pins)) != 0)
return 0xffffffff;
return (davinci_gpio_bank67->in_data & CALIMAIN_HWVERSION_MASK)
>> CALIMAIN_HWVERSION_SHIFT;
}
/*
* determine the oscillator frequency depending on the board revision
*
* rev 0x00 ... 25 MHz oscillator
* rev 0x01 ... 24 MHz oscillator
*/
int calimain_get_osc_freq(void)
{
u32 rev;
int freq;
rev = get_board_rev();
switch (rev) {
case 0x00:
freq = 25000000;
break;
default:
freq = 24000000;
break;
}
return freq;
}
int board_init(void)
{
int val;
irq_init();
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
#ifdef CONFIG_DRIVER_TI_EMAC
/* select emac MII mode */
val = readl(&davinci_syscfg_regs->cfgchip3);
val &= ~(1 << 8);
writel(val, &davinci_syscfg_regs->cfgchip3);
#endif /* CONFIG_DRIVER_TI_EMAC */
#ifdef CONFIG_HW_WATCHDOG
davinci_hw_watchdog_enable();
#endif
printf("Input clock frequency: %d Hz\n", calimain_get_osc_freq());
printf("Board revision: %d\n", get_board_rev());
return 0;
}
#ifdef CONFIG_DRIVER_TI_EMAC
/*
* Initializes on-board ethernet controllers.
*/
int board_eth_init(bd_t *bis)
{
if (!davinci_emac_initialize()) {
printf("Error: Ethernet init failed!\n");
return -1;
}
return 0;
}
#endif /* CONFIG_DRIVER_TI_EMAC */
#ifdef CONFIG_HW_WATCHDOG
void hw_watchdog_reset(void)
{
davinci_hw_watchdog_reset();
}
#endif