mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
bbeff30cbd
Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese <sr@denx.de>
95 lines
3.2 KiB
C
95 lines
3.2 KiB
C
/*
|
|
* (C) Copyright 2000-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <spd_sdram.h>
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/*-------------------------------------------------------------------------+
|
|
| Interrupt controller setup for the Walnut/Sycamore board.
|
|
| Note: IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
| IRQ 16 405GP internally generated; active low; level sensitive
|
|
| IRQ 17-24 RESERVED
|
|
| IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
|
|
| IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
|
|
| IRQ 27 (EXT IRQ 2) Not Used
|
|
| IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
|
|
| IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
|
|
| IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
|
|
| IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
|
|
| Note for Walnut board:
|
|
| An interrupt taken for the FPGA (IRQ 25) indicates that either
|
|
| the Mouse, Keyboard, IRDA, or External Expansion caused the
|
|
| interrupt. The FPGA must be read to determine which device
|
|
| caused the interrupt. The default setting of the FPGA clears
|
|
|
|
|
+-------------------------------------------------------------------------*/
|
|
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(uicer, 0x00000000); /* disable all ints */
|
|
mtdcr(uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
|
|
mtdcr(uicpr, 0xFFFFFFE0); /* set int polarities */
|
|
mtdcr(uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/* set UART1 control to select CTS/RTS */
|
|
#define FPGA_BRDC 0xF0300004
|
|
*(volatile char *)(FPGA_BRDC) |= 0x1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
uint pvr = get_pvr();
|
|
|
|
if (pvr == PVR_405GPR_RB) {
|
|
puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
|
|
} else {
|
|
puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
|
|
}
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
|
|
* the necessary info for SDRAM controller configuration
|
|
*/
|
|
long int initdram(int board_type)
|
|
{
|
|
return spd_sdram();
|
|
}
|