mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
605 lines
15 KiB
C
605 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
|
|
*
|
|
*/
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <dm.h>
|
|
#include <net.h>
|
|
#include <miiphy.h>
|
|
#include <console.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/gpio.h>
|
|
|
|
#include "pic32_eth.h"
|
|
|
|
#define MAX_RX_BUF_SIZE 1536
|
|
#define MAX_RX_DESCR PKTBUFSRX
|
|
#define MAX_TX_DESCR 2
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct pic32eth_dev {
|
|
struct eth_dma_desc rxd_ring[MAX_RX_DESCR];
|
|
struct eth_dma_desc txd_ring[MAX_TX_DESCR];
|
|
u32 rxd_idx; /* index of RX desc to read */
|
|
/* regs */
|
|
struct pic32_ectl_regs *ectl_regs;
|
|
struct pic32_emac_regs *emac_regs;
|
|
/* Phy */
|
|
struct phy_device *phydev;
|
|
phy_interface_t phyif;
|
|
u32 phy_addr;
|
|
struct gpio_desc rst_gpio;
|
|
};
|
|
|
|
void __weak board_netphy_reset(void *dev)
|
|
{
|
|
struct pic32eth_dev *priv = dev;
|
|
|
|
if (!dm_gpio_is_valid(&priv->rst_gpio))
|
|
return;
|
|
|
|
/* phy reset */
|
|
dm_gpio_set_value(&priv->rst_gpio, 0);
|
|
udelay(300);
|
|
dm_gpio_set_value(&priv->rst_gpio, 1);
|
|
udelay(300);
|
|
}
|
|
|
|
/* Initialize mii(MDIO) interface, discover which PHY is
|
|
* attached to the device, and configure it properly.
|
|
*/
|
|
static int pic32_mii_init(struct pic32eth_dev *priv)
|
|
{
|
|
struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
|
|
struct pic32_emac_regs *emac_p = priv->emac_regs;
|
|
|
|
/* board phy reset */
|
|
board_netphy_reset(priv);
|
|
|
|
/* disable RX, TX & all transactions */
|
|
writel(ETHCON_ON | ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
|
|
|
|
/* wait till busy */
|
|
wait_for_bit_le32(&ectl_p->stat.raw, ETHSTAT_BUSY, false,
|
|
CONFIG_SYS_HZ, false);
|
|
|
|
/* turn controller ON to access PHY over MII */
|
|
writel(ETHCON_ON, &ectl_p->con1.set);
|
|
|
|
mdelay(10);
|
|
|
|
/* reset MAC */
|
|
writel(EMAC_SOFTRESET, &emac_p->cfg1.set); /* reset assert */
|
|
mdelay(10);
|
|
writel(EMAC_SOFTRESET, &emac_p->cfg1.clr); /* reset deassert */
|
|
|
|
/* initialize MDIO/MII */
|
|
if (priv->phyif == PHY_INTERFACE_MODE_RMII) {
|
|
writel(EMAC_RMII_RESET, &emac_p->supp.set);
|
|
mdelay(10);
|
|
writel(EMAC_RMII_RESET, &emac_p->supp.clr);
|
|
}
|
|
|
|
return pic32_mdio_init(PIC32_MDIO_NAME, (ulong)&emac_p->mii);
|
|
}
|
|
|
|
static int pic32_phy_init(struct pic32eth_dev *priv, struct udevice *dev)
|
|
{
|
|
struct mii_dev *mii;
|
|
|
|
mii = miiphy_get_dev_by_name(PIC32_MDIO_NAME);
|
|
|
|
/* find & connect PHY */
|
|
priv->phydev = phy_connect(mii, priv->phy_addr,
|
|
dev, priv->phyif);
|
|
if (!priv->phydev) {
|
|
printf("%s: %s: Error, PHY connect\n", __FILE__, __func__);
|
|
return 0;
|
|
}
|
|
|
|
/* Wait for phy to complete reset */
|
|
mdelay(10);
|
|
|
|
/* configure supported modes */
|
|
priv->phydev->supported = SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_Autoneg;
|
|
|
|
priv->phydev->advertising = ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_Autoneg;
|
|
|
|
priv->phydev->autoneg = AUTONEG_ENABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Configure MAC based on negotiated speed and duplex
|
|
* reported by PHY.
|
|
*/
|
|
static int pic32_mac_adjust_link(struct pic32eth_dev *priv)
|
|
{
|
|
struct phy_device *phydev = priv->phydev;
|
|
struct pic32_emac_regs *emac_p = priv->emac_regs;
|
|
|
|
if (!phydev->link) {
|
|
printf("%s: No link.\n", phydev->dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (phydev->duplex) {
|
|
writel(EMAC_FULLDUP, &emac_p->cfg2.set);
|
|
writel(FULLDUP_GAP_TIME, &emac_p->ipgt.raw);
|
|
} else {
|
|
writel(EMAC_FULLDUP, &emac_p->cfg2.clr);
|
|
writel(HALFDUP_GAP_TIME, &emac_p->ipgt.raw);
|
|
}
|
|
|
|
switch (phydev->speed) {
|
|
case SPEED_100:
|
|
writel(EMAC_RMII_SPD100, &emac_p->supp.set);
|
|
break;
|
|
case SPEED_10:
|
|
writel(EMAC_RMII_SPD100, &emac_p->supp.clr);
|
|
break;
|
|
default:
|
|
printf("%s: Speed was bad\n", phydev->dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printf("pic32eth: PHY is %s with %dbase%s, %s\n",
|
|
phydev->drv->name, phydev->speed,
|
|
(phydev->port == PORT_TP) ? "T" : "X",
|
|
(phydev->duplex) ? "full" : "half");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pic32_mac_init(struct pic32eth_dev *priv, u8 *macaddr)
|
|
{
|
|
struct pic32_emac_regs *emac_p = priv->emac_regs;
|
|
u32 stat = 0, v;
|
|
u64 expire;
|
|
|
|
v = EMAC_TXPAUSE | EMAC_RXPAUSE | EMAC_RXENABLE;
|
|
writel(v, &emac_p->cfg1.raw);
|
|
|
|
v = EMAC_EXCESS | EMAC_AUTOPAD | EMAC_PADENABLE |
|
|
EMAC_CRCENABLE | EMAC_LENGTHCK | EMAC_FULLDUP;
|
|
writel(v, &emac_p->cfg2.raw);
|
|
|
|
/* recommended back-to-back inter-packet gap for 10 Mbps half duplex */
|
|
writel(HALFDUP_GAP_TIME, &emac_p->ipgt.raw);
|
|
|
|
/* recommended non-back-to-back interpacket gap is 0xc12 */
|
|
writel(0xc12, &emac_p->ipgr.raw);
|
|
|
|
/* recommended collision window retry limit is 0x370F */
|
|
writel(0x370f, &emac_p->clrt.raw);
|
|
|
|
/* set maximum frame length: allow VLAN tagged frame */
|
|
writel(0x600, &emac_p->maxf.raw);
|
|
|
|
/* set the mac address */
|
|
writel(macaddr[0] | (macaddr[1] << 8), &emac_p->sa2.raw);
|
|
writel(macaddr[2] | (macaddr[3] << 8), &emac_p->sa1.raw);
|
|
writel(macaddr[4] | (macaddr[5] << 8), &emac_p->sa0.raw);
|
|
|
|
/* default, enable 10 Mbps operation */
|
|
writel(EMAC_RMII_SPD100, &emac_p->supp.clr);
|
|
|
|
/* wait until link status UP or deadline elapsed */
|
|
expire = get_ticks() + get_tbclk() * 2;
|
|
for (; get_ticks() < expire;) {
|
|
stat = phy_read(priv->phydev, priv->phy_addr, MII_BMSR);
|
|
if (stat & BMSR_LSTATUS)
|
|
break;
|
|
}
|
|
|
|
if (!(stat & BMSR_LSTATUS))
|
|
printf("MAC: Link is DOWN!\n");
|
|
|
|
/* delay to stabilize before any tx/rx */
|
|
mdelay(10);
|
|
}
|
|
|
|
static void pic32_mac_reset(struct pic32eth_dev *priv)
|
|
{
|
|
struct pic32_emac_regs *emac_p = priv->emac_regs;
|
|
struct mii_dev *mii;
|
|
|
|
/* Reset MAC */
|
|
writel(EMAC_SOFTRESET, &emac_p->cfg1.raw);
|
|
mdelay(10);
|
|
|
|
/* clear reset */
|
|
writel(0, &emac_p->cfg1.raw);
|
|
|
|
/* Reset MII */
|
|
mii = priv->phydev->bus;
|
|
if (mii && mii->reset)
|
|
mii->reset(mii);
|
|
}
|
|
|
|
/* initializes the MAC and PHY, then establishes a link */
|
|
static void pic32_ctrl_reset(struct pic32eth_dev *priv)
|
|
{
|
|
struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
|
|
u32 v;
|
|
|
|
/* disable RX, TX & any other transactions */
|
|
writel(ETHCON_ON | ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
|
|
|
|
/* wait till busy */
|
|
wait_for_bit_le32(&ectl_p->stat.raw, ETHSTAT_BUSY, false,
|
|
CONFIG_SYS_HZ, false);
|
|
/* decrement received buffcnt to zero. */
|
|
while (readl(&ectl_p->stat.raw) & ETHSTAT_BUFCNT)
|
|
writel(ETHCON_BUFCDEC, &ectl_p->con1.set);
|
|
|
|
/* clear any existing interrupt event */
|
|
writel(0xffffffff, &ectl_p->irq.clr);
|
|
|
|
/* clear RX/TX start address */
|
|
writel(0xffffffff, &ectl_p->txst.clr);
|
|
writel(0xffffffff, &ectl_p->rxst.clr);
|
|
|
|
/* clear the receive filters */
|
|
writel(0x00ff, &ectl_p->rxfc.clr);
|
|
|
|
/* set the receive filters
|
|
* ETH_FILT_CRC_ERR_REJECT
|
|
* ETH_FILT_RUNT_REJECT
|
|
* ETH_FILT_UCAST_ACCEPT
|
|
* ETH_FILT_MCAST_ACCEPT
|
|
* ETH_FILT_BCAST_ACCEPT
|
|
*/
|
|
v = ETHRXFC_BCEN | ETHRXFC_MCEN | ETHRXFC_UCEN |
|
|
ETHRXFC_RUNTEN | ETHRXFC_CRCOKEN;
|
|
writel(v, &ectl_p->rxfc.set);
|
|
|
|
/* turn controller ON to access PHY over MII */
|
|
writel(ETHCON_ON, &ectl_p->con1.set);
|
|
}
|
|
|
|
static void pic32_rx_desc_init(struct pic32eth_dev *priv)
|
|
{
|
|
struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
|
|
struct eth_dma_desc *rxd;
|
|
u32 idx, bufsz;
|
|
|
|
priv->rxd_idx = 0;
|
|
for (idx = 0; idx < MAX_RX_DESCR; idx++) {
|
|
rxd = &priv->rxd_ring[idx];
|
|
|
|
/* hw owned */
|
|
rxd->hdr = EDH_NPV | EDH_EOWN | EDH_STICKY;
|
|
|
|
/* packet buffer address */
|
|
rxd->data_buff = virt_to_phys(net_rx_packets[idx]);
|
|
|
|
/* link to next desc */
|
|
rxd->next_ed = virt_to_phys(rxd + 1);
|
|
|
|
/* reset status */
|
|
rxd->stat1 = 0;
|
|
rxd->stat2 = 0;
|
|
|
|
/* decrement bufcnt */
|
|
writel(ETHCON_BUFCDEC, &ectl_p->con1.set);
|
|
}
|
|
|
|
/* link last descr to beginning of list */
|
|
rxd->next_ed = virt_to_phys(&priv->rxd_ring[0]);
|
|
|
|
/* flush rx ring */
|
|
flush_dcache_range((ulong)priv->rxd_ring,
|
|
(ulong)priv->rxd_ring + sizeof(priv->rxd_ring));
|
|
|
|
/* set rx desc-ring start address */
|
|
writel((ulong)virt_to_phys(&priv->rxd_ring[0]), &ectl_p->rxst.raw);
|
|
|
|
/* RX Buffer size */
|
|
bufsz = readl(&ectl_p->con2.raw);
|
|
bufsz &= ~(ETHCON_RXBUFSZ << ETHCON_RXBUFSZ_SHFT);
|
|
bufsz |= ((MAX_RX_BUF_SIZE / 16) << ETHCON_RXBUFSZ_SHFT);
|
|
writel(bufsz, &ectl_p->con2.raw);
|
|
|
|
/* enable the receiver in hardware which allows hardware
|
|
* to DMA received pkts to the descriptor pointer address.
|
|
*/
|
|
writel(ETHCON_RXEN, &ectl_p->con1.set);
|
|
}
|
|
|
|
static int pic32_eth_start(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct pic32eth_dev *priv = dev_get_priv(dev);
|
|
|
|
/* controller */
|
|
pic32_ctrl_reset(priv);
|
|
|
|
/* reset MAC */
|
|
pic32_mac_reset(priv);
|
|
|
|
/* configure PHY */
|
|
phy_config(priv->phydev);
|
|
|
|
/* initialize MAC */
|
|
pic32_mac_init(priv, &pdata->enetaddr[0]);
|
|
|
|
/* init RX descriptor; TX descriptors are handled in xmit */
|
|
pic32_rx_desc_init(priv);
|
|
|
|
/* Start up & update link status of PHY */
|
|
phy_startup(priv->phydev);
|
|
|
|
/* adjust mac with phy link status */
|
|
return pic32_mac_adjust_link(priv);
|
|
}
|
|
|
|
static void pic32_eth_stop(struct udevice *dev)
|
|
{
|
|
struct pic32eth_dev *priv = dev_get_priv(dev);
|
|
struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
|
|
struct pic32_emac_regs *emac_p = priv->emac_regs;
|
|
|
|
/* Reset the phy if the controller is enabled */
|
|
if (readl(&ectl_p->con1.raw) & ETHCON_ON)
|
|
phy_reset(priv->phydev);
|
|
|
|
/* Shut down the PHY */
|
|
phy_shutdown(priv->phydev);
|
|
|
|
/* Stop rx/tx */
|
|
writel(ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr);
|
|
mdelay(10);
|
|
|
|
/* reset MAC */
|
|
writel(EMAC_SOFTRESET, &emac_p->cfg1.raw);
|
|
|
|
/* clear reset */
|
|
writel(0, &emac_p->cfg1.raw);
|
|
mdelay(10);
|
|
|
|
/* disable controller */
|
|
writel(ETHCON_ON, &ectl_p->con1.clr);
|
|
mdelay(10);
|
|
|
|
/* wait until everything is down */
|
|
wait_for_bit_le32(&ectl_p->stat.raw, ETHSTAT_BUSY, false,
|
|
2 * CONFIG_SYS_HZ, false);
|
|
|
|
/* clear any existing interrupt event */
|
|
writel(0xffffffff, &ectl_p->irq.clr);
|
|
}
|
|
|
|
static int pic32_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct pic32eth_dev *priv = dev_get_priv(dev);
|
|
struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
|
|
struct eth_dma_desc *txd;
|
|
u64 deadline;
|
|
|
|
txd = &priv->txd_ring[0];
|
|
|
|
/* set proper flags & length in descriptor header */
|
|
txd->hdr = EDH_SOP | EDH_EOP | EDH_EOWN | EDH_BCOUNT(length);
|
|
|
|
/* pass buffer address to hardware */
|
|
txd->data_buff = virt_to_phys(packet);
|
|
|
|
debug("%s: %d / .hdr %x, .data_buff %x, .stat %x, .nexted %x\n",
|
|
__func__, __LINE__, txd->hdr, txd->data_buff, txd->stat2,
|
|
txd->next_ed);
|
|
|
|
/* cache flush (packet) */
|
|
flush_dcache_range((ulong)packet, (ulong)packet + length);
|
|
|
|
/* cache flush (txd) */
|
|
flush_dcache_range((ulong)txd, (ulong)txd + sizeof(*txd));
|
|
|
|
/* pass descriptor table base to h/w */
|
|
writel(virt_to_phys(txd), &ectl_p->txst.raw);
|
|
|
|
/* ready to send enabled, hardware can now send the packet(s) */
|
|
writel(ETHCON_TXRTS | ETHCON_ON, &ectl_p->con1.set);
|
|
|
|
/* wait until tx has completed and h/w has released ownership
|
|
* of the tx descriptor or timeout elapsed.
|
|
*/
|
|
deadline = get_ticks() + get_tbclk();
|
|
for (;;) {
|
|
/* check timeout */
|
|
if (get_ticks() > deadline)
|
|
return -ETIMEDOUT;
|
|
|
|
if (ctrlc())
|
|
return -EINTR;
|
|
|
|
/* tx completed ? */
|
|
if (readl(&ectl_p->con1.raw) & ETHCON_TXRTS) {
|
|
udelay(1);
|
|
continue;
|
|
}
|
|
|
|
/* h/w not released ownership yet? */
|
|
invalidate_dcache_range((ulong)txd, (ulong)txd + sizeof(*txd));
|
|
if (!(txd->hdr & EDH_EOWN))
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pic32_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct pic32eth_dev *priv = dev_get_priv(dev);
|
|
struct eth_dma_desc *rxd;
|
|
u32 idx = priv->rxd_idx;
|
|
u32 rx_count;
|
|
|
|
/* find the next ready to receive */
|
|
rxd = &priv->rxd_ring[idx];
|
|
|
|
invalidate_dcache_range((ulong)rxd, (ulong)rxd + sizeof(*rxd));
|
|
/* check if owned by MAC */
|
|
if (rxd->hdr & EDH_EOWN)
|
|
return -EAGAIN;
|
|
|
|
/* Sanity check on header: SOP and EOP */
|
|
if ((rxd->hdr & (EDH_SOP | EDH_EOP)) != (EDH_SOP | EDH_EOP)) {
|
|
printf("%s: %s, rx pkt across multiple descr\n",
|
|
__FILE__, __func__);
|
|
return 0;
|
|
}
|
|
|
|
debug("%s: %d /idx %i, hdr=%x, data_buff %x, stat %x, nexted %x\n",
|
|
__func__, __LINE__, idx, rxd->hdr,
|
|
rxd->data_buff, rxd->stat2, rxd->next_ed);
|
|
|
|
/* Sanity check on rx_stat: OK, CRC */
|
|
if (!RSV_RX_OK(rxd->stat2) || RSV_CRC_ERR(rxd->stat2)) {
|
|
debug("%s: %s: Error, rx problem detected\n",
|
|
__FILE__, __func__);
|
|
return 0;
|
|
}
|
|
|
|
/* invalidate dcache */
|
|
rx_count = RSV_RX_COUNT(rxd->stat2);
|
|
invalidate_dcache_range((ulong)net_rx_packets[idx],
|
|
(ulong)net_rx_packets[idx] + rx_count);
|
|
|
|
/* Pass the packet to protocol layer */
|
|
*packetp = net_rx_packets[idx];
|
|
|
|
/* increment number of bytes rcvd (ignore CRC) */
|
|
return rx_count - 4;
|
|
}
|
|
|
|
static int pic32_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct pic32eth_dev *priv = dev_get_priv(dev);
|
|
struct pic32_ectl_regs *ectl_p = priv->ectl_regs;
|
|
struct eth_dma_desc *rxd;
|
|
int idx = priv->rxd_idx;
|
|
|
|
/* sanity check */
|
|
if (packet != net_rx_packets[idx]) {
|
|
printf("rxd_id %d: packet is not matched,\n", idx);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* prepare for receive */
|
|
rxd = &priv->rxd_ring[idx];
|
|
rxd->hdr = EDH_STICKY | EDH_NPV | EDH_EOWN;
|
|
|
|
flush_dcache_range((ulong)rxd, (ulong)rxd + sizeof(*rxd));
|
|
|
|
/* decrement rx pkt count */
|
|
writel(ETHCON_BUFCDEC, &ectl_p->con1.set);
|
|
|
|
debug("%s: %d / idx %i, hdr %x, data_buff %x, stat %x, nexted %x\n",
|
|
__func__, __LINE__, idx, rxd->hdr, rxd->data_buff,
|
|
rxd->stat2, rxd->next_ed);
|
|
|
|
priv->rxd_idx = (priv->rxd_idx + 1) % MAX_RX_DESCR;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops pic32_eth_ops = {
|
|
.start = pic32_eth_start,
|
|
.send = pic32_eth_send,
|
|
.recv = pic32_eth_recv,
|
|
.free_pkt = pic32_eth_free_pkt,
|
|
.stop = pic32_eth_stop,
|
|
};
|
|
|
|
static int pic32_eth_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct pic32eth_dev *priv = dev_get_priv(dev);
|
|
const char *phy_mode;
|
|
void __iomem *iobase;
|
|
fdt_addr_t addr;
|
|
fdt_size_t size;
|
|
int offset = 0;
|
|
int phy_addr = -1;
|
|
|
|
addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg",
|
|
&size);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
iobase = ioremap(addr, size);
|
|
pdata->iobase = (phys_addr_t)addr;
|
|
|
|
/* get phy mode */
|
|
pdata->phy_interface = -1;
|
|
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
|
|
NULL);
|
|
if (phy_mode)
|
|
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
if (pdata->phy_interface == -1) {
|
|
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* get phy addr */
|
|
offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev),
|
|
"phy-handle");
|
|
if (offset > 0)
|
|
phy_addr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
|
|
|
|
/* phy reset gpio */
|
|
gpio_request_by_name_nodev(dev_ofnode(dev), "reset-gpios", 0,
|
|
&priv->rst_gpio, GPIOD_IS_OUT);
|
|
|
|
priv->phyif = pdata->phy_interface;
|
|
priv->phy_addr = phy_addr;
|
|
priv->ectl_regs = iobase;
|
|
priv->emac_regs = iobase + PIC32_EMAC1CFG1;
|
|
|
|
pic32_mii_init(priv);
|
|
|
|
return pic32_phy_init(priv, dev);
|
|
}
|
|
|
|
static int pic32_eth_remove(struct udevice *dev)
|
|
{
|
|
struct pic32eth_dev *priv = dev_get_priv(dev);
|
|
struct mii_dev *bus;
|
|
|
|
dm_gpio_free(dev, &priv->rst_gpio);
|
|
phy_shutdown(priv->phydev);
|
|
free(priv->phydev);
|
|
bus = miiphy_get_dev_by_name(PIC32_MDIO_NAME);
|
|
mdio_unregister(bus);
|
|
mdio_free(bus);
|
|
iounmap(priv->ectl_regs);
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id pic32_eth_ids[] = {
|
|
{ .compatible = "microchip,pic32mzda-eth" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pic32_ethernet) = {
|
|
.name = "pic32_ethernet",
|
|
.id = UCLASS_ETH,
|
|
.of_match = pic32_eth_ids,
|
|
.probe = pic32_eth_probe,
|
|
.remove = pic32_eth_remove,
|
|
.ops = &pic32_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct pic32eth_dev),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
};
|