mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
d1998a9fde
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
1568 lines
38 KiB
C
1568 lines
38 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 MediaTek Inc.
|
|
*
|
|
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
* Author: Mark Lee <mark-mc.lee@mediatek.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/mii.h>
|
|
|
|
#include "mtk_eth.h"
|
|
|
|
#define NUM_TX_DESC 24
|
|
#define NUM_RX_DESC 24
|
|
#define TX_TOTAL_BUF_SIZE (NUM_TX_DESC * PKTSIZE_ALIGN)
|
|
#define RX_TOTAL_BUF_SIZE (NUM_RX_DESC * PKTSIZE_ALIGN)
|
|
#define TOTAL_PKT_BUF_SIZE (TX_TOTAL_BUF_SIZE + RX_TOTAL_BUF_SIZE)
|
|
|
|
#define MT753X_NUM_PHYS 5
|
|
#define MT753X_NUM_PORTS 7
|
|
#define MT753X_DFL_SMI_ADDR 31
|
|
#define MT753X_SMI_ADDR_MASK 0x1f
|
|
|
|
#define MT753X_PHY_ADDR(base, addr) \
|
|
(((base) + (addr)) & 0x1f)
|
|
|
|
#define GDMA_FWD_TO_CPU \
|
|
(0x20000000 | \
|
|
GDM_ICS_EN | \
|
|
GDM_TCS_EN | \
|
|
GDM_UCS_EN | \
|
|
STRP_CRC | \
|
|
(DP_PDMA << MYMAC_DP_S) | \
|
|
(DP_PDMA << BC_DP_S) | \
|
|
(DP_PDMA << MC_DP_S) | \
|
|
(DP_PDMA << UN_DP_S))
|
|
|
|
#define GDMA_FWD_DISCARD \
|
|
(0x20000000 | \
|
|
GDM_ICS_EN | \
|
|
GDM_TCS_EN | \
|
|
GDM_UCS_EN | \
|
|
STRP_CRC | \
|
|
(DP_DISCARD << MYMAC_DP_S) | \
|
|
(DP_DISCARD << BC_DP_S) | \
|
|
(DP_DISCARD << MC_DP_S) | \
|
|
(DP_DISCARD << UN_DP_S))
|
|
|
|
struct pdma_rxd_info1 {
|
|
u32 PDP0;
|
|
};
|
|
|
|
struct pdma_rxd_info2 {
|
|
u32 PLEN1 : 14;
|
|
u32 LS1 : 1;
|
|
u32 UN_USED : 1;
|
|
u32 PLEN0 : 14;
|
|
u32 LS0 : 1;
|
|
u32 DDONE : 1;
|
|
};
|
|
|
|
struct pdma_rxd_info3 {
|
|
u32 PDP1;
|
|
};
|
|
|
|
struct pdma_rxd_info4 {
|
|
u32 FOE_ENTRY : 14;
|
|
u32 CRSN : 5;
|
|
u32 SP : 3;
|
|
u32 L4F : 1;
|
|
u32 L4VLD : 1;
|
|
u32 TACK : 1;
|
|
u32 IP4F : 1;
|
|
u32 IP4 : 1;
|
|
u32 IP6 : 1;
|
|
u32 UN_USED : 4;
|
|
};
|
|
|
|
struct pdma_rxdesc {
|
|
struct pdma_rxd_info1 rxd_info1;
|
|
struct pdma_rxd_info2 rxd_info2;
|
|
struct pdma_rxd_info3 rxd_info3;
|
|
struct pdma_rxd_info4 rxd_info4;
|
|
};
|
|
|
|
struct pdma_txd_info1 {
|
|
u32 SDP0;
|
|
};
|
|
|
|
struct pdma_txd_info2 {
|
|
u32 SDL1 : 14;
|
|
u32 LS1 : 1;
|
|
u32 BURST : 1;
|
|
u32 SDL0 : 14;
|
|
u32 LS0 : 1;
|
|
u32 DDONE : 1;
|
|
};
|
|
|
|
struct pdma_txd_info3 {
|
|
u32 SDP1;
|
|
};
|
|
|
|
struct pdma_txd_info4 {
|
|
u32 VLAN_TAG : 16;
|
|
u32 INS : 1;
|
|
u32 RESV : 2;
|
|
u32 UDF : 6;
|
|
u32 FPORT : 3;
|
|
u32 TSO : 1;
|
|
u32 TUI_CO : 3;
|
|
};
|
|
|
|
struct pdma_txdesc {
|
|
struct pdma_txd_info1 txd_info1;
|
|
struct pdma_txd_info2 txd_info2;
|
|
struct pdma_txd_info3 txd_info3;
|
|
struct pdma_txd_info4 txd_info4;
|
|
};
|
|
|
|
enum mtk_switch {
|
|
SW_NONE,
|
|
SW_MT7530,
|
|
SW_MT7531
|
|
};
|
|
|
|
enum mtk_soc {
|
|
SOC_MT7623,
|
|
SOC_MT7629,
|
|
SOC_MT7622
|
|
};
|
|
|
|
struct mtk_eth_priv {
|
|
char pkt_pool[TOTAL_PKT_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN);
|
|
|
|
struct pdma_txdesc *tx_ring_noc;
|
|
struct pdma_rxdesc *rx_ring_noc;
|
|
|
|
int rx_dma_owner_idx0;
|
|
int tx_cpu_owner_idx0;
|
|
|
|
void __iomem *fe_base;
|
|
void __iomem *gmac_base;
|
|
void __iomem *ethsys_base;
|
|
void __iomem *sgmii_base;
|
|
|
|
struct mii_dev *mdio_bus;
|
|
int (*mii_read)(struct mtk_eth_priv *priv, u8 phy, u8 reg);
|
|
int (*mii_write)(struct mtk_eth_priv *priv, u8 phy, u8 reg, u16 val);
|
|
int (*mmd_read)(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg);
|
|
int (*mmd_write)(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg,
|
|
u16 val);
|
|
|
|
enum mtk_soc soc;
|
|
int gmac_id;
|
|
int force_mode;
|
|
int speed;
|
|
int duplex;
|
|
|
|
struct phy_device *phydev;
|
|
int phy_interface;
|
|
int phy_addr;
|
|
|
|
enum mtk_switch sw;
|
|
int (*switch_init)(struct mtk_eth_priv *priv);
|
|
u32 mt753x_smi_addr;
|
|
u32 mt753x_phy_base;
|
|
|
|
struct gpio_desc rst_gpio;
|
|
int mcm;
|
|
|
|
struct reset_ctl rst_fe;
|
|
struct reset_ctl rst_mcm;
|
|
};
|
|
|
|
static void mtk_pdma_write(struct mtk_eth_priv *priv, u32 reg, u32 val)
|
|
{
|
|
writel(val, priv->fe_base + PDMA_BASE + reg);
|
|
}
|
|
|
|
static void mtk_pdma_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr,
|
|
u32 set)
|
|
{
|
|
clrsetbits_le32(priv->fe_base + PDMA_BASE + reg, clr, set);
|
|
}
|
|
|
|
static void mtk_gdma_write(struct mtk_eth_priv *priv, int no, u32 reg,
|
|
u32 val)
|
|
{
|
|
u32 gdma_base;
|
|
|
|
if (no == 1)
|
|
gdma_base = GDMA2_BASE;
|
|
else
|
|
gdma_base = GDMA1_BASE;
|
|
|
|
writel(val, priv->fe_base + gdma_base + reg);
|
|
}
|
|
|
|
static u32 mtk_gmac_read(struct mtk_eth_priv *priv, u32 reg)
|
|
{
|
|
return readl(priv->gmac_base + reg);
|
|
}
|
|
|
|
static void mtk_gmac_write(struct mtk_eth_priv *priv, u32 reg, u32 val)
|
|
{
|
|
writel(val, priv->gmac_base + reg);
|
|
}
|
|
|
|
static void mtk_gmac_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr, u32 set)
|
|
{
|
|
clrsetbits_le32(priv->gmac_base + reg, clr, set);
|
|
}
|
|
|
|
static void mtk_ethsys_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr,
|
|
u32 set)
|
|
{
|
|
clrsetbits_le32(priv->ethsys_base + reg, clr, set);
|
|
}
|
|
|
|
/* Direct MDIO clause 22/45 access via SoC */
|
|
static int mtk_mii_rw(struct mtk_eth_priv *priv, u8 phy, u8 reg, u16 data,
|
|
u32 cmd, u32 st)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
val = (st << MDIO_ST_S) |
|
|
((cmd << MDIO_CMD_S) & MDIO_CMD_M) |
|
|
(((u32)phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) |
|
|
(((u32)reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M);
|
|
|
|
if (cmd == MDIO_CMD_WRITE)
|
|
val |= data & MDIO_RW_DATA_M;
|
|
|
|
mtk_gmac_write(priv, GMAC_PIAC_REG, val | PHY_ACS_ST);
|
|
|
|
ret = wait_for_bit_le32(priv->gmac_base + GMAC_PIAC_REG,
|
|
PHY_ACS_ST, 0, 5000, 0);
|
|
if (ret) {
|
|
pr_warn("MDIO access timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
if (cmd == MDIO_CMD_READ) {
|
|
val = mtk_gmac_read(priv, GMAC_PIAC_REG);
|
|
return val & MDIO_RW_DATA_M;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Direct MDIO clause 22 read via SoC */
|
|
static int mtk_mii_read(struct mtk_eth_priv *priv, u8 phy, u8 reg)
|
|
{
|
|
return mtk_mii_rw(priv, phy, reg, 0, MDIO_CMD_READ, MDIO_ST_C22);
|
|
}
|
|
|
|
/* Direct MDIO clause 22 write via SoC */
|
|
static int mtk_mii_write(struct mtk_eth_priv *priv, u8 phy, u8 reg, u16 data)
|
|
{
|
|
return mtk_mii_rw(priv, phy, reg, data, MDIO_CMD_WRITE, MDIO_ST_C22);
|
|
}
|
|
|
|
/* Direct MDIO clause 45 read via SoC */
|
|
static int mtk_mmd_read(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = mtk_mii_rw(priv, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mtk_mii_rw(priv, addr, devad, 0, MDIO_CMD_READ_C45,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
/* Direct MDIO clause 45 write via SoC */
|
|
static int mtk_mmd_write(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = mtk_mii_rw(priv, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mtk_mii_rw(priv, addr, devad, val, MDIO_CMD_WRITE,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
/* Indirect MDIO clause 45 read via MII registers */
|
|
static int mtk_mmd_ind_read(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_ADDR << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_DATA << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return priv->mii_read(priv, addr, MII_MMD_ADDR_DATA_REG);
|
|
}
|
|
|
|
/* Indirect MDIO clause 45 write via MII registers */
|
|
static int mtk_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_ADDR << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = priv->mii_write(priv, addr, MII_MMD_ACC_CTL_REG,
|
|
(MMD_DATA << MMD_CMD_S) |
|
|
((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, val);
|
|
}
|
|
|
|
/*
|
|
* MT7530 Internal Register Address Bits
|
|
* -------------------------------------------------------------------
|
|
* | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 |
|
|
* |----------------------------------------|---------------|--------|
|
|
* | Page Address | Reg Address | Unused |
|
|
* -------------------------------------------------------------------
|
|
*/
|
|
|
|
static int mt753x_reg_read(struct mtk_eth_priv *priv, u32 reg, u32 *data)
|
|
{
|
|
int ret, low_word, high_word;
|
|
|
|
/* Write page address */
|
|
ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Read low word */
|
|
low_word = mtk_mii_read(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf);
|
|
if (low_word < 0)
|
|
return low_word;
|
|
|
|
/* Read high word */
|
|
high_word = mtk_mii_read(priv, priv->mt753x_smi_addr, 0x10);
|
|
if (high_word < 0)
|
|
return high_word;
|
|
|
|
if (data)
|
|
*data = ((u32)high_word << 16) | (low_word & 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt753x_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 data)
|
|
{
|
|
int ret;
|
|
|
|
/* Write page address */
|
|
ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Write low word */
|
|
ret = mtk_mii_write(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf,
|
|
data & 0xffff);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Write high word */
|
|
return mtk_mii_write(priv, priv->mt753x_smi_addr, 0x10, data >> 16);
|
|
}
|
|
|
|
static void mt753x_reg_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr,
|
|
u32 set)
|
|
{
|
|
u32 val;
|
|
|
|
mt753x_reg_read(priv, reg, &val);
|
|
val &= ~clr;
|
|
val |= set;
|
|
mt753x_reg_write(priv, reg, val);
|
|
}
|
|
|
|
/* Indirect MDIO clause 22/45 access */
|
|
static int mt7531_mii_rw(struct mtk_eth_priv *priv, int phy, int reg, u16 data,
|
|
u32 cmd, u32 st)
|
|
{
|
|
ulong timeout;
|
|
u32 val, timeout_ms;
|
|
int ret = 0;
|
|
|
|
val = (st << MDIO_ST_S) |
|
|
((cmd << MDIO_CMD_S) & MDIO_CMD_M) |
|
|
((phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) |
|
|
((reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M);
|
|
|
|
if (cmd == MDIO_CMD_WRITE || cmd == MDIO_CMD_ADDR)
|
|
val |= data & MDIO_RW_DATA_M;
|
|
|
|
mt753x_reg_write(priv, MT7531_PHY_IAC, val | PHY_ACS_ST);
|
|
|
|
timeout_ms = 100;
|
|
timeout = get_timer(0);
|
|
while (1) {
|
|
mt753x_reg_read(priv, MT7531_PHY_IAC, &val);
|
|
|
|
if ((val & PHY_ACS_ST) == 0)
|
|
break;
|
|
|
|
if (get_timer(timeout) > timeout_ms)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (cmd == MDIO_CMD_READ || cmd == MDIO_CMD_READ_C45) {
|
|
mt753x_reg_read(priv, MT7531_PHY_IAC, &val);
|
|
ret = val & MDIO_RW_DATA_M;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt7531_mii_ind_read(struct mtk_eth_priv *priv, u8 phy, u8 reg)
|
|
{
|
|
u8 phy_addr;
|
|
|
|
if (phy >= MT753X_NUM_PHYS)
|
|
return -EINVAL;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy);
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, reg, 0, MDIO_CMD_READ,
|
|
MDIO_ST_C22);
|
|
}
|
|
|
|
static int mt7531_mii_ind_write(struct mtk_eth_priv *priv, u8 phy, u8 reg,
|
|
u16 val)
|
|
{
|
|
u8 phy_addr;
|
|
|
|
if (phy >= MT753X_NUM_PHYS)
|
|
return -EINVAL;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy);
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, reg, val, MDIO_CMD_WRITE,
|
|
MDIO_ST_C22);
|
|
}
|
|
|
|
int mt7531_mmd_ind_read(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg)
|
|
{
|
|
u8 phy_addr;
|
|
int ret;
|
|
|
|
if (addr >= MT753X_NUM_PHYS)
|
|
return -EINVAL;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr);
|
|
|
|
ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR,
|
|
MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, devad, 0, MDIO_CMD_READ_C45,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
static int mt7531_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad,
|
|
u16 reg, u16 val)
|
|
{
|
|
u8 phy_addr;
|
|
int ret;
|
|
|
|
if (addr >= MT753X_NUM_PHYS)
|
|
return 0;
|
|
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr);
|
|
|
|
ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR,
|
|
MDIO_ST_C45);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mt7531_mii_rw(priv, phy_addr, devad, val, MDIO_CMD_WRITE,
|
|
MDIO_ST_C45);
|
|
}
|
|
|
|
static int mtk_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
|
|
{
|
|
struct mtk_eth_priv *priv = bus->priv;
|
|
|
|
if (devad < 0)
|
|
return priv->mii_read(priv, addr, reg);
|
|
else
|
|
return priv->mmd_read(priv, addr, devad, reg);
|
|
}
|
|
|
|
static int mtk_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
|
|
u16 val)
|
|
{
|
|
struct mtk_eth_priv *priv = bus->priv;
|
|
|
|
if (devad < 0)
|
|
return priv->mii_write(priv, addr, reg, val);
|
|
else
|
|
return priv->mmd_write(priv, addr, devad, reg, val);
|
|
}
|
|
|
|
static int mtk_mdio_register(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
struct mii_dev *mdio_bus = mdio_alloc();
|
|
int ret;
|
|
|
|
if (!mdio_bus)
|
|
return -ENOMEM;
|
|
|
|
/* Assign MDIO access APIs according to the switch/phy */
|
|
switch (priv->sw) {
|
|
case SW_MT7530:
|
|
priv->mii_read = mtk_mii_read;
|
|
priv->mii_write = mtk_mii_write;
|
|
priv->mmd_read = mtk_mmd_ind_read;
|
|
priv->mmd_write = mtk_mmd_ind_write;
|
|
break;
|
|
case SW_MT7531:
|
|
priv->mii_read = mt7531_mii_ind_read;
|
|
priv->mii_write = mt7531_mii_ind_write;
|
|
priv->mmd_read = mt7531_mmd_ind_read;
|
|
priv->mmd_write = mt7531_mmd_ind_write;
|
|
break;
|
|
default:
|
|
priv->mii_read = mtk_mii_read;
|
|
priv->mii_write = mtk_mii_write;
|
|
priv->mmd_read = mtk_mmd_read;
|
|
priv->mmd_write = mtk_mmd_write;
|
|
}
|
|
|
|
mdio_bus->read = mtk_mdio_read;
|
|
mdio_bus->write = mtk_mdio_write;
|
|
snprintf(mdio_bus->name, sizeof(mdio_bus->name), dev->name);
|
|
|
|
mdio_bus->priv = (void *)priv;
|
|
|
|
ret = mdio_register(mdio_bus);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->mdio_bus = mdio_bus;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt753x_core_reg_read(struct mtk_eth_priv *priv, u32 reg)
|
|
{
|
|
u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0);
|
|
|
|
return priv->mmd_read(priv, phy_addr, 0x1f, reg);
|
|
}
|
|
|
|
static void mt753x_core_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 val)
|
|
{
|
|
u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0);
|
|
|
|
priv->mmd_write(priv, phy_addr, 0x1f, reg, val);
|
|
}
|
|
|
|
static int mt7530_pad_clk_setup(struct mtk_eth_priv *priv, int mode)
|
|
{
|
|
u32 ncpo1, ssc_delta;
|
|
|
|
switch (mode) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
ncpo1 = 0x0c80;
|
|
ssc_delta = 0x87;
|
|
break;
|
|
default:
|
|
printf("error: xMII mode %d not supported\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Disable MT7530 core clock */
|
|
mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, 0);
|
|
|
|
/* Disable MT7530 PLL */
|
|
mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1,
|
|
(2 << RG_GSWPLL_POSDIV_200M_S) |
|
|
(32 << RG_GSWPLL_FBKDIV_200M_S));
|
|
|
|
/* For MT7530 core clock = 500Mhz */
|
|
mt753x_core_reg_write(priv, CORE_GSWPLL_GRP2,
|
|
(1 << RG_GSWPLL_POSDIV_500M_S) |
|
|
(25 << RG_GSWPLL_FBKDIV_500M_S));
|
|
|
|
/* Enable MT7530 PLL */
|
|
mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1,
|
|
(2 << RG_GSWPLL_POSDIV_200M_S) |
|
|
(32 << RG_GSWPLL_FBKDIV_200M_S) |
|
|
RG_GSWPLL_EN_PRE);
|
|
|
|
udelay(20);
|
|
|
|
mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
|
|
|
|
/* Setup the MT7530 TRGMII Tx Clock */
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP5, ncpo1);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP6, 0);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP10, ssc_delta);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP11, ssc_delta);
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN |
|
|
RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN);
|
|
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP2,
|
|
RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
|
|
(1 << RG_SYSPLL_POSDIV_S));
|
|
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP7,
|
|
RG_LCDDS_PCW_NCPO_CHG | (3 << RG_LCCDS_C_S) |
|
|
RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
|
|
|
|
/* Enable MT7530 core clock */
|
|
mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG,
|
|
REG_GSWCK_EN | REG_TRGMIICK_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7530_setup(struct mtk_eth_priv *priv)
|
|
{
|
|
u16 phy_addr, phy_val;
|
|
u32 val;
|
|
int i;
|
|
|
|
/* Select 250MHz clk for RGMII mode */
|
|
mtk_ethsys_rmw(priv, ETHSYS_CLKCFG0_REG,
|
|
ETHSYS_TRGMII_CLK_SEL362_5, 0);
|
|
|
|
/* Modify HWTRAP first to allow direct access to internal PHYs */
|
|
mt753x_reg_read(priv, HWTRAP_REG, &val);
|
|
val |= CHG_TRAP;
|
|
val &= ~C_MDIO_BPS;
|
|
mt753x_reg_write(priv, MHWTRAP_REG, val);
|
|
|
|
/* Calculate the phy base address */
|
|
val = ((val & SMI_ADDR_M) >> SMI_ADDR_S) << 3;
|
|
priv->mt753x_phy_base = (val | 0x7) + 1;
|
|
|
|
/* Turn off PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val |= BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
/* Force MAC link down before reset */
|
|
mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE);
|
|
mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE);
|
|
|
|
/* MT7530 reset */
|
|
mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST);
|
|
udelay(100);
|
|
|
|
val = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
MAC_MODE | FORCE_MODE |
|
|
MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN |
|
|
(SPEED_1000M << FORCE_SPD_S) |
|
|
FORCE_DPX | FORCE_LINK;
|
|
|
|
/* MT7530 Port6: Forced 1000M/FD, FC disabled */
|
|
mt753x_reg_write(priv, PMCR_REG(6), val);
|
|
|
|
/* MT7530 Port5: Forced link down */
|
|
mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE);
|
|
|
|
/* MT7530 Port6: Set to RGMII */
|
|
mt753x_reg_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_M, P6_INTF_MODE_RGMII);
|
|
|
|
/* Hardware Trap: Enable Port6, Disable Port5 */
|
|
mt753x_reg_read(priv, HWTRAP_REG, &val);
|
|
val |= CHG_TRAP | LOOPDET_DIS | P5_INTF_DIS |
|
|
(P5_INTF_SEL_GMAC5 << P5_INTF_SEL_S) |
|
|
(P5_INTF_MODE_RGMII << P5_INTF_MODE_S);
|
|
val &= ~(C_MDIO_BPS | P6_INTF_DIS);
|
|
mt753x_reg_write(priv, MHWTRAP_REG, val);
|
|
|
|
/* Setup switch core pll */
|
|
mt7530_pad_clk_setup(priv, priv->phy_interface);
|
|
|
|
/* Lower Tx Driving for TRGMII path */
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
|
|
mt753x_reg_write(priv, MT7530_TRGMII_TD_ODT(i),
|
|
(8 << TD_DM_DRVP_S) | (8 << TD_DM_DRVN_S));
|
|
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
|
|
mt753x_reg_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_M, 16);
|
|
|
|
/* Turn on PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val &= ~BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt7531_core_pll_setup(struct mtk_eth_priv *priv, int mcm)
|
|
{
|
|
/* Step 1 : Disable MT7531 COREPLL */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, 0);
|
|
|
|
/* Step 2: switch to XTAL output */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_CLKSW, SW_CLKSW);
|
|
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, 0);
|
|
|
|
/* Step 3: disable PLLGP and enable program PLLGP */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_PLLGP, SW_PLLGP);
|
|
|
|
/* Step 4: program COREPLL output frequency to 500MHz */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_POSDIV_M,
|
|
2 << RG_COREPLL_POSDIV_S);
|
|
udelay(25);
|
|
|
|
/* Currently, support XTAL 25Mhz only */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_M,
|
|
0x140000 << RG_COREPLL_SDM_PCW_S);
|
|
|
|
/* Set feedback divide ratio update signal to high */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG,
|
|
RG_COREPLL_SDM_PCW_CHG);
|
|
|
|
/* Wait for at least 16 XTAL clocks */
|
|
udelay(10);
|
|
|
|
/* Step 5: set feedback divide ratio update signal to low */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG, 0);
|
|
|
|
/* add enable 325M clock for SGMII */
|
|
mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
|
|
|
|
/* add enable 250SSC clock for RGMII */
|
|
mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
|
|
|
|
/*Step 6: Enable MT7531 PLL */
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, RG_COREPLL_EN);
|
|
|
|
mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, EN_COREPLL);
|
|
|
|
udelay(25);
|
|
}
|
|
|
|
static int mt7531_port_sgmii_init(struct mtk_eth_priv *priv,
|
|
u32 port)
|
|
{
|
|
if (port != 5 && port != 6) {
|
|
printf("mt7531: port %d is not a SGMII port\n", port);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set SGMII GEN2 speed(2.5G) */
|
|
mt753x_reg_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port),
|
|
SGMSYS_SPEED_2500, SGMSYS_SPEED_2500);
|
|
|
|
/* Disable SGMII AN */
|
|
mt753x_reg_rmw(priv, MT7531_PCS_CONTROL_1(port),
|
|
SGMII_AN_ENABLE, 0);
|
|
|
|
/* SGMII force mode setting */
|
|
mt753x_reg_write(priv, MT7531_SGMII_MODE(port), SGMII_FORCE_MODE);
|
|
|
|
/* Release PHYA power down state */
|
|
mt753x_reg_rmw(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
|
|
SGMII_PHYA_PWD, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7531_port_rgmii_init(struct mtk_eth_priv *priv, u32 port)
|
|
{
|
|
u32 val;
|
|
|
|
if (port != 5) {
|
|
printf("error: RGMII mode is not available for port %d\n",
|
|
port);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mt753x_reg_read(priv, MT7531_CLKGEN_CTRL, &val);
|
|
val |= GP_CLK_EN;
|
|
val &= ~GP_MODE_M;
|
|
val |= GP_MODE_RGMII << GP_MODE_S;
|
|
val |= TXCLK_NO_REVERSE;
|
|
val |= RXCLK_NO_DELAY;
|
|
val &= ~CLK_SKEW_IN_M;
|
|
val |= CLK_SKEW_IN_NO_CHANGE << CLK_SKEW_IN_S;
|
|
val &= ~CLK_SKEW_OUT_M;
|
|
val |= CLK_SKEW_OUT_NO_CHANGE << CLK_SKEW_OUT_S;
|
|
mt753x_reg_write(priv, MT7531_CLKGEN_CTRL, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt7531_phy_setting(struct mtk_eth_priv *priv)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
/* Enable HW auto downshift */
|
|
priv->mii_write(priv, i, 0x1f, 0x1);
|
|
val = priv->mii_read(priv, i, PHY_EXT_REG_14);
|
|
val |= PHY_EN_DOWN_SHFIT;
|
|
priv->mii_write(priv, i, PHY_EXT_REG_14, val);
|
|
|
|
/* PHY link down power saving enable */
|
|
val = priv->mii_read(priv, i, PHY_EXT_REG_17);
|
|
val |= PHY_LINKDOWN_POWER_SAVING_EN;
|
|
priv->mii_write(priv, i, PHY_EXT_REG_17, val);
|
|
|
|
val = priv->mmd_read(priv, i, 0x1e, PHY_DEV1E_REG_0C6);
|
|
val &= ~PHY_POWER_SAVING_M;
|
|
val |= PHY_POWER_SAVING_TX << PHY_POWER_SAVING_S;
|
|
priv->mmd_write(priv, i, 0x1e, PHY_DEV1E_REG_0C6, val);
|
|
}
|
|
}
|
|
|
|
static int mt7531_setup(struct mtk_eth_priv *priv)
|
|
{
|
|
u16 phy_addr, phy_val;
|
|
u32 val;
|
|
u32 pmcr;
|
|
u32 port5_sgmii;
|
|
int i;
|
|
|
|
priv->mt753x_phy_base = (priv->mt753x_smi_addr + 1) &
|
|
MT753X_SMI_ADDR_MASK;
|
|
|
|
/* Turn off PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val |= BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
/* Force MAC link down before reset */
|
|
mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE_LNK);
|
|
mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE_LNK);
|
|
|
|
/* Switch soft reset */
|
|
mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST);
|
|
udelay(100);
|
|
|
|
/* Enable MDC input Schmitt Trigger */
|
|
mt753x_reg_rmw(priv, MT7531_SMT0_IOLB, SMT_IOLB_5_SMI_MDC_EN,
|
|
SMT_IOLB_5_SMI_MDC_EN);
|
|
|
|
mt7531_core_pll_setup(priv, priv->mcm);
|
|
|
|
mt753x_reg_read(priv, MT7531_TOP_SIG_SR, &val);
|
|
port5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
|
|
|
|
/* port5 support either RGMII or SGMII, port6 only support SGMII. */
|
|
switch (priv->phy_interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
if (!port5_sgmii)
|
|
mt7531_port_rgmii_init(priv, 5);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
mt7531_port_sgmii_init(priv, 6);
|
|
if (port5_sgmii)
|
|
mt7531_port_sgmii_init(priv, 5);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
pmcr = MT7531_FORCE_MODE |
|
|
(IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
MAC_MODE | MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN |
|
|
FORCE_RX_FC | FORCE_TX_FC |
|
|
(SPEED_1000M << FORCE_SPD_S) | FORCE_DPX |
|
|
FORCE_LINK;
|
|
|
|
mt753x_reg_write(priv, PMCR_REG(5), pmcr);
|
|
mt753x_reg_write(priv, PMCR_REG(6), pmcr);
|
|
|
|
/* Turn on PHYs */
|
|
for (i = 0; i < MT753X_NUM_PHYS; i++) {
|
|
phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i);
|
|
phy_val = priv->mii_read(priv, phy_addr, MII_BMCR);
|
|
phy_val &= ~BMCR_PDOWN;
|
|
priv->mii_write(priv, phy_addr, MII_BMCR, phy_val);
|
|
}
|
|
|
|
mt7531_phy_setting(priv);
|
|
|
|
/* Enable Internal PHYs */
|
|
val = mt753x_core_reg_read(priv, CORE_PLL_GROUP4);
|
|
val |= MT7531_BYPASS_MODE;
|
|
val &= ~MT7531_POWER_ON_OFF;
|
|
mt753x_core_reg_write(priv, CORE_PLL_GROUP4, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mt753x_switch_init(struct mtk_eth_priv *priv)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
/* Global reset switch */
|
|
if (priv->mcm) {
|
|
reset_assert(&priv->rst_mcm);
|
|
udelay(1000);
|
|
reset_deassert(&priv->rst_mcm);
|
|
mdelay(1000);
|
|
} else if (dm_gpio_is_valid(&priv->rst_gpio)) {
|
|
dm_gpio_set_value(&priv->rst_gpio, 0);
|
|
udelay(1000);
|
|
dm_gpio_set_value(&priv->rst_gpio, 1);
|
|
mdelay(1000);
|
|
}
|
|
|
|
ret = priv->switch_init(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set port isolation */
|
|
for (i = 0; i < MT753X_NUM_PORTS; i++) {
|
|
/* Set port matrix mode */
|
|
if (i != 6)
|
|
mt753x_reg_write(priv, PCR_REG(i),
|
|
(0x40 << PORT_MATRIX_S));
|
|
else
|
|
mt753x_reg_write(priv, PCR_REG(i),
|
|
(0x3f << PORT_MATRIX_S));
|
|
|
|
/* Set port mode to user port */
|
|
mt753x_reg_write(priv, PVC_REG(i),
|
|
(0x8100 << STAG_VPID_S) |
|
|
(VLAN_ATTR_USER << VLAN_ATTR_S));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_phy_link_adjust(struct mtk_eth_priv *priv)
|
|
{
|
|
u16 lcl_adv = 0, rmt_adv = 0;
|
|
u8 flowctrl;
|
|
u32 mcr;
|
|
|
|
mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
(MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) |
|
|
MAC_MODE | FORCE_MODE |
|
|
MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN;
|
|
|
|
switch (priv->phydev->speed) {
|
|
case SPEED_10:
|
|
mcr |= (SPEED_10M << FORCE_SPD_S);
|
|
break;
|
|
case SPEED_100:
|
|
mcr |= (SPEED_100M << FORCE_SPD_S);
|
|
break;
|
|
case SPEED_1000:
|
|
mcr |= (SPEED_1000M << FORCE_SPD_S);
|
|
break;
|
|
};
|
|
|
|
if (priv->phydev->link)
|
|
mcr |= FORCE_LINK;
|
|
|
|
if (priv->phydev->duplex) {
|
|
mcr |= FORCE_DPX;
|
|
|
|
if (priv->phydev->pause)
|
|
rmt_adv = LPA_PAUSE_CAP;
|
|
if (priv->phydev->asym_pause)
|
|
rmt_adv |= LPA_PAUSE_ASYM;
|
|
|
|
if (priv->phydev->advertising & ADVERTISED_Pause)
|
|
lcl_adv |= ADVERTISE_PAUSE_CAP;
|
|
if (priv->phydev->advertising & ADVERTISED_Asym_Pause)
|
|
lcl_adv |= ADVERTISE_PAUSE_ASYM;
|
|
|
|
flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
|
|
|
|
if (flowctrl & FLOW_CTRL_TX)
|
|
mcr |= FORCE_TX_FC;
|
|
if (flowctrl & FLOW_CTRL_RX)
|
|
mcr |= FORCE_RX_FC;
|
|
|
|
debug("rx pause %s, tx pause %s\n",
|
|
flowctrl & FLOW_CTRL_RX ? "enabled" : "disabled",
|
|
flowctrl & FLOW_CTRL_TX ? "enabled" : "disabled");
|
|
}
|
|
|
|
mtk_gmac_write(priv, GMAC_PORT_MCR(priv->gmac_id), mcr);
|
|
}
|
|
|
|
static int mtk_phy_start(struct mtk_eth_priv *priv)
|
|
{
|
|
struct phy_device *phydev = priv->phydev;
|
|
int ret;
|
|
|
|
ret = phy_startup(phydev);
|
|
|
|
if (ret) {
|
|
debug("Could not initialize PHY %s\n", phydev->dev->name);
|
|
return ret;
|
|
}
|
|
|
|
if (!phydev->link) {
|
|
debug("%s: link down.\n", phydev->dev->name);
|
|
return 0;
|
|
}
|
|
|
|
mtk_phy_link_adjust(priv);
|
|
|
|
debug("Speed: %d, %s duplex%s\n", phydev->speed,
|
|
(phydev->duplex) ? "full" : "half",
|
|
(phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_phy_probe(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_connect(priv->mdio_bus, priv->phy_addr, dev,
|
|
priv->phy_interface);
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
phydev->supported &= PHY_GBIT_FEATURES;
|
|
phydev->advertising = phydev->supported;
|
|
|
|
priv->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_sgmii_init(struct mtk_eth_priv *priv)
|
|
{
|
|
/* Set SGMII GEN2 speed(2.5G) */
|
|
clrsetbits_le32(priv->sgmii_base + ((priv->soc == SOC_MT7622) ?
|
|
SGMSYS_GEN2_SPEED : SGMSYS_GEN2_SPEED_V2),
|
|
SGMSYS_SPEED_2500, SGMSYS_SPEED_2500);
|
|
|
|
/* Disable SGMII AN */
|
|
clrsetbits_le32(priv->sgmii_base + SGMSYS_PCS_CONTROL_1,
|
|
SGMII_AN_ENABLE, 0);
|
|
|
|
/* SGMII force mode setting */
|
|
writel(SGMII_FORCE_MODE, priv->sgmii_base + SGMSYS_SGMII_MODE);
|
|
|
|
/* Release PHYA power down state */
|
|
clrsetbits_le32(priv->sgmii_base + SGMSYS_QPHY_PWR_STATE_CTRL,
|
|
SGMII_PHYA_PWD, 0);
|
|
}
|
|
|
|
static void mtk_mac_init(struct mtk_eth_priv *priv)
|
|
{
|
|
int i, ge_mode = 0;
|
|
u32 mcr;
|
|
|
|
switch (priv->phy_interface) {
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
ge_mode = GE_MODE_RGMII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
ge_mode = GE_MODE_RGMII;
|
|
mtk_ethsys_rmw(priv, ETHSYS_SYSCFG0_REG, SYSCFG0_SGMII_SEL_M,
|
|
SYSCFG0_SGMII_SEL(priv->gmac_id));
|
|
mtk_sgmii_init(priv);
|
|
break;
|
|
case PHY_INTERFACE_MODE_MII:
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
ge_mode = GE_MODE_MII;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
ge_mode = GE_MODE_RMII;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* set the gmac to the right mode */
|
|
mtk_ethsys_rmw(priv, ETHSYS_SYSCFG0_REG,
|
|
SYSCFG0_GE_MODE_M << SYSCFG0_GE_MODE_S(priv->gmac_id),
|
|
ge_mode << SYSCFG0_GE_MODE_S(priv->gmac_id));
|
|
|
|
if (priv->force_mode) {
|
|
mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
|
|
(MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) |
|
|
MAC_MODE | FORCE_MODE |
|
|
MAC_TX_EN | MAC_RX_EN |
|
|
BKOFF_EN | BACKPR_EN |
|
|
FORCE_LINK;
|
|
|
|
switch (priv->speed) {
|
|
case SPEED_10:
|
|
mcr |= SPEED_10M << FORCE_SPD_S;
|
|
break;
|
|
case SPEED_100:
|
|
mcr |= SPEED_100M << FORCE_SPD_S;
|
|
break;
|
|
case SPEED_1000:
|
|
mcr |= SPEED_1000M << FORCE_SPD_S;
|
|
break;
|
|
}
|
|
|
|
if (priv->duplex)
|
|
mcr |= FORCE_DPX;
|
|
|
|
mtk_gmac_write(priv, GMAC_PORT_MCR(priv->gmac_id), mcr);
|
|
}
|
|
|
|
if (priv->soc == SOC_MT7623) {
|
|
/* Lower Tx Driving for TRGMII path */
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
|
|
mtk_gmac_write(priv, GMAC_TRGMII_TD_ODT(i),
|
|
(8 << TD_DM_DRVP_S) |
|
|
(8 << TD_DM_DRVN_S));
|
|
|
|
mtk_gmac_rmw(priv, GMAC_TRGMII_RCK_CTRL, 0,
|
|
RX_RST | RXC_DQSISEL);
|
|
mtk_gmac_rmw(priv, GMAC_TRGMII_RCK_CTRL, RX_RST, 0);
|
|
}
|
|
}
|
|
|
|
static void mtk_eth_fifo_init(struct mtk_eth_priv *priv)
|
|
{
|
|
char *pkt_base = priv->pkt_pool;
|
|
int i;
|
|
|
|
mtk_pdma_rmw(priv, PDMA_GLO_CFG_REG, 0xffff0000, 0);
|
|
udelay(500);
|
|
|
|
memset(priv->tx_ring_noc, 0, NUM_TX_DESC * sizeof(struct pdma_txdesc));
|
|
memset(priv->rx_ring_noc, 0, NUM_RX_DESC * sizeof(struct pdma_rxdesc));
|
|
memset(priv->pkt_pool, 0, TOTAL_PKT_BUF_SIZE);
|
|
|
|
flush_dcache_range((ulong)pkt_base,
|
|
(ulong)(pkt_base + TOTAL_PKT_BUF_SIZE));
|
|
|
|
priv->rx_dma_owner_idx0 = 0;
|
|
priv->tx_cpu_owner_idx0 = 0;
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
priv->tx_ring_noc[i].txd_info2.LS0 = 1;
|
|
priv->tx_ring_noc[i].txd_info2.DDONE = 1;
|
|
priv->tx_ring_noc[i].txd_info4.FPORT = priv->gmac_id + 1;
|
|
|
|
priv->tx_ring_noc[i].txd_info1.SDP0 = virt_to_phys(pkt_base);
|
|
pkt_base += PKTSIZE_ALIGN;
|
|
}
|
|
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
priv->rx_ring_noc[i].rxd_info2.PLEN0 = PKTSIZE_ALIGN;
|
|
priv->rx_ring_noc[i].rxd_info1.PDP0 = virt_to_phys(pkt_base);
|
|
pkt_base += PKTSIZE_ALIGN;
|
|
}
|
|
|
|
mtk_pdma_write(priv, TX_BASE_PTR_REG(0),
|
|
virt_to_phys(priv->tx_ring_noc));
|
|
mtk_pdma_write(priv, TX_MAX_CNT_REG(0), NUM_TX_DESC);
|
|
mtk_pdma_write(priv, TX_CTX_IDX_REG(0), priv->tx_cpu_owner_idx0);
|
|
|
|
mtk_pdma_write(priv, RX_BASE_PTR_REG(0),
|
|
virt_to_phys(priv->rx_ring_noc));
|
|
mtk_pdma_write(priv, RX_MAX_CNT_REG(0), NUM_RX_DESC);
|
|
mtk_pdma_write(priv, RX_CRX_IDX_REG(0), NUM_RX_DESC - 1);
|
|
|
|
mtk_pdma_write(priv, PDMA_RST_IDX_REG, RST_DTX_IDX0 | RST_DRX_IDX0);
|
|
}
|
|
|
|
static int mtk_eth_start(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
/* Reset FE */
|
|
reset_assert(&priv->rst_fe);
|
|
udelay(1000);
|
|
reset_deassert(&priv->rst_fe);
|
|
mdelay(10);
|
|
|
|
/* Packets forward to PDMA */
|
|
mtk_gdma_write(priv, priv->gmac_id, GDMA_IG_CTRL_REG, GDMA_FWD_TO_CPU);
|
|
|
|
if (priv->gmac_id == 0)
|
|
mtk_gdma_write(priv, 1, GDMA_IG_CTRL_REG, GDMA_FWD_DISCARD);
|
|
else
|
|
mtk_gdma_write(priv, 0, GDMA_IG_CTRL_REG, GDMA_FWD_DISCARD);
|
|
|
|
udelay(500);
|
|
|
|
mtk_eth_fifo_init(priv);
|
|
|
|
/* Start PHY */
|
|
if (priv->sw == SW_NONE) {
|
|
ret = mtk_phy_start(priv);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mtk_pdma_rmw(priv, PDMA_GLO_CFG_REG, 0,
|
|
TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
|
|
udelay(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_eth_stop(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
mtk_pdma_rmw(priv, PDMA_GLO_CFG_REG,
|
|
TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN, 0);
|
|
udelay(500);
|
|
|
|
wait_for_bit_le32(priv->fe_base + PDMA_BASE + PDMA_GLO_CFG_REG,
|
|
RX_DMA_BUSY | TX_DMA_BUSY, 0, 5000, 0);
|
|
}
|
|
|
|
static int mtk_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
unsigned char *mac = pdata->enetaddr;
|
|
u32 macaddr_lsb, macaddr_msb;
|
|
|
|
macaddr_msb = ((u32)mac[0] << 8) | (u32)mac[1];
|
|
macaddr_lsb = ((u32)mac[2] << 24) | ((u32)mac[3] << 16) |
|
|
((u32)mac[4] << 8) | (u32)mac[5];
|
|
|
|
mtk_gdma_write(priv, priv->gmac_id, GDMA_MAC_MSB_REG, macaddr_msb);
|
|
mtk_gdma_write(priv, priv->gmac_id, GDMA_MAC_LSB_REG, macaddr_lsb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
u32 idx = priv->tx_cpu_owner_idx0;
|
|
void *pkt_base;
|
|
|
|
if (!priv->tx_ring_noc[idx].txd_info2.DDONE) {
|
|
debug("mtk-eth: TX DMA descriptor ring is full\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
pkt_base = (void *)phys_to_virt(priv->tx_ring_noc[idx].txd_info1.SDP0);
|
|
memcpy(pkt_base, packet, length);
|
|
flush_dcache_range((ulong)pkt_base, (ulong)pkt_base +
|
|
roundup(length, ARCH_DMA_MINALIGN));
|
|
|
|
priv->tx_ring_noc[idx].txd_info2.SDL0 = length;
|
|
priv->tx_ring_noc[idx].txd_info2.DDONE = 0;
|
|
|
|
priv->tx_cpu_owner_idx0 = (priv->tx_cpu_owner_idx0 + 1) % NUM_TX_DESC;
|
|
mtk_pdma_write(priv, TX_CTX_IDX_REG(0), priv->tx_cpu_owner_idx0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
u32 idx = priv->rx_dma_owner_idx0;
|
|
uchar *pkt_base;
|
|
u32 length;
|
|
|
|
if (!priv->rx_ring_noc[idx].rxd_info2.DDONE) {
|
|
debug("mtk-eth: RX DMA descriptor ring is empty\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
length = priv->rx_ring_noc[idx].rxd_info2.PLEN0;
|
|
pkt_base = (void *)phys_to_virt(priv->rx_ring_noc[idx].rxd_info1.PDP0);
|
|
invalidate_dcache_range((ulong)pkt_base, (ulong)pkt_base +
|
|
roundup(length, ARCH_DMA_MINALIGN));
|
|
|
|
if (packetp)
|
|
*packetp = pkt_base;
|
|
|
|
return length;
|
|
}
|
|
|
|
static int mtk_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
u32 idx = priv->rx_dma_owner_idx0;
|
|
|
|
priv->rx_ring_noc[idx].rxd_info2.DDONE = 0;
|
|
priv->rx_ring_noc[idx].rxd_info2.LS0 = 0;
|
|
priv->rx_ring_noc[idx].rxd_info2.PLEN0 = PKTSIZE_ALIGN;
|
|
|
|
mtk_pdma_write(priv, RX_CRX_IDX_REG(0), idx);
|
|
priv->rx_dma_owner_idx0 = (priv->rx_dma_owner_idx0 + 1) % NUM_RX_DESC;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
ulong iobase = pdata->iobase;
|
|
int ret;
|
|
|
|
/* Frame Engine Register Base */
|
|
priv->fe_base = (void *)iobase;
|
|
|
|
/* GMAC Register Base */
|
|
priv->gmac_base = (void *)(iobase + GMAC_BASE);
|
|
|
|
/* MDIO register */
|
|
ret = mtk_mdio_register(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Prepare for tx/rx rings */
|
|
priv->tx_ring_noc = (struct pdma_txdesc *)
|
|
noncached_alloc(sizeof(struct pdma_txdesc) * NUM_TX_DESC,
|
|
ARCH_DMA_MINALIGN);
|
|
priv->rx_ring_noc = (struct pdma_rxdesc *)
|
|
noncached_alloc(sizeof(struct pdma_rxdesc) * NUM_RX_DESC,
|
|
ARCH_DMA_MINALIGN);
|
|
|
|
/* Set MAC mode */
|
|
mtk_mac_init(priv);
|
|
|
|
/* Probe phy if switch is not specified */
|
|
if (priv->sw == SW_NONE)
|
|
return mtk_phy_probe(dev);
|
|
|
|
/* Initialize switch */
|
|
return mt753x_switch_init(priv);
|
|
}
|
|
|
|
static int mtk_eth_remove(struct udevice *dev)
|
|
{
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
/* MDIO unregister */
|
|
mdio_unregister(priv->mdio_bus);
|
|
mdio_free(priv->mdio_bus);
|
|
|
|
/* Stop possibly started DMA */
|
|
mtk_eth_stop(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_eth_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct mtk_eth_priv *priv = dev_get_priv(dev);
|
|
struct ofnode_phandle_args args;
|
|
struct regmap *regmap;
|
|
const char *str;
|
|
ofnode subnode;
|
|
int ret;
|
|
|
|
priv->soc = dev_get_driver_data(dev);
|
|
|
|
pdata->iobase = dev_read_addr(dev);
|
|
|
|
/* get corresponding ethsys phandle */
|
|
ret = dev_read_phandle_with_args(dev, "mediatek,ethsys", NULL, 0, 0,
|
|
&args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regmap = syscon_node_to_regmap(args.node);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
priv->ethsys_base = regmap_get_range(regmap, 0);
|
|
if (!priv->ethsys_base) {
|
|
dev_err(dev, "Unable to find ethsys\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Reset controllers */
|
|
ret = reset_get_by_name(dev, "fe", &priv->rst_fe);
|
|
if (ret) {
|
|
printf("error: Unable to get reset ctrl for frame engine\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->gmac_id = dev_read_u32_default(dev, "mediatek,gmac-id", 0);
|
|
|
|
/* Interface mode is required */
|
|
str = dev_read_string(dev, "phy-mode");
|
|
if (str) {
|
|
pdata->phy_interface = phy_get_interface_by_name(str);
|
|
priv->phy_interface = pdata->phy_interface;
|
|
} else {
|
|
printf("error: phy-mode is not set\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Force mode or autoneg */
|
|
subnode = ofnode_find_subnode(dev_ofnode(dev), "fixed-link");
|
|
if (ofnode_valid(subnode)) {
|
|
priv->force_mode = 1;
|
|
priv->speed = ofnode_read_u32_default(subnode, "speed", 0);
|
|
priv->duplex = ofnode_read_bool(subnode, "full-duplex");
|
|
|
|
if (priv->speed != SPEED_10 && priv->speed != SPEED_100 &&
|
|
priv->speed != SPEED_1000) {
|
|
printf("error: no valid speed set in fixed-link\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII) {
|
|
/* get corresponding sgmii phandle */
|
|
ret = dev_read_phandle_with_args(dev, "mediatek,sgmiisys",
|
|
NULL, 0, 0, &args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regmap = syscon_node_to_regmap(args.node);
|
|
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
priv->sgmii_base = regmap_get_range(regmap, 0);
|
|
|
|
if (!priv->sgmii_base) {
|
|
dev_err(dev, "Unable to find sgmii\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* check for switch first, otherwise phy will be used */
|
|
priv->sw = SW_NONE;
|
|
priv->switch_init = NULL;
|
|
str = dev_read_string(dev, "mediatek,switch");
|
|
|
|
if (str) {
|
|
if (!strcmp(str, "mt7530")) {
|
|
priv->sw = SW_MT7530;
|
|
priv->switch_init = mt7530_setup;
|
|
priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR;
|
|
} else if (!strcmp(str, "mt7531")) {
|
|
priv->sw = SW_MT7531;
|
|
priv->switch_init = mt7531_setup;
|
|
priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR;
|
|
} else {
|
|
printf("error: unsupported switch\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->mcm = dev_read_bool(dev, "mediatek,mcm");
|
|
if (priv->mcm) {
|
|
ret = reset_get_by_name(dev, "mcm", &priv->rst_mcm);
|
|
if (ret) {
|
|
printf("error: no reset ctrl for mcm\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
gpio_request_by_name(dev, "reset-gpios", 0,
|
|
&priv->rst_gpio, GPIOD_IS_OUT);
|
|
}
|
|
} else {
|
|
ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0,
|
|
0, &args);
|
|
if (ret) {
|
|
printf("error: phy-handle is not specified\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->phy_addr = ofnode_read_s32_default(args.node, "reg", -1);
|
|
if (priv->phy_addr < 0) {
|
|
printf("error: phy address is not specified\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mtk_eth_ids[] = {
|
|
{ .compatible = "mediatek,mt7629-eth", .data = SOC_MT7629 },
|
|
{ .compatible = "mediatek,mt7623-eth", .data = SOC_MT7623 },
|
|
{ .compatible = "mediatek,mt7622-eth", .data = SOC_MT7622 },
|
|
{}
|
|
};
|
|
|
|
static const struct eth_ops mtk_eth_ops = {
|
|
.start = mtk_eth_start,
|
|
.stop = mtk_eth_stop,
|
|
.send = mtk_eth_send,
|
|
.recv = mtk_eth_recv,
|
|
.free_pkt = mtk_eth_free_pkt,
|
|
.write_hwaddr = mtk_eth_write_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(mtk_eth) = {
|
|
.name = "mtk-eth",
|
|
.id = UCLASS_ETH,
|
|
.of_match = mtk_eth_ids,
|
|
.of_to_plat = mtk_eth_of_to_plat,
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
.probe = mtk_eth_probe,
|
|
.remove = mtk_eth_remove,
|
|
.ops = &mtk_eth_ops,
|
|
.priv_auto = sizeof(struct mtk_eth_priv),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|