u-boot/arch/arm/include/asm/arch-omap5
Kishon Vijay Abraham I 2022270c7d ARM: OMAP5: set mmc clock frequency to 192MHz
Now that omap_hsmmc has support for hs200 mode, change the clock
frequency to 192MHz. Also change the REFERENCE CLOCK frequency to
192MHz based on which the internal mmc clock divider is calculated.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
..
clock.h ARM: OMAP5: set mmc clock frequency to 192MHz 2018-02-19 16:58:55 +09:00
cpu.h ti: wdt: omap5: Define WDT_BASE for omap5+ SoC 2017-04-08 21:32:49 -04:00
dra7xx_iodelay.h ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot 2018-02-19 16:58:55 +09:00
ehci.h arm: omap5: echi: Add GPL-2.0+ SPDX-License-Identifier 2013-09-20 10:30:54 -04:00
gpio.h ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro 2017-03-20 17:56:21 -04:00
hardware.h ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX 2016-12-03 13:21:11 -05:00
i2c.h Convert CONFIG_SYS_I2C_BUS_MAX to Kconfig 2017-09-01 20:44:30 -04:00
mem.h board/ti/dra7xx: add support for parallel NOR 2014-08-25 10:48:12 -04:00
mmc_host_def.h omap: Update the base address of the MMC controllers 2018-01-18 22:04:21 -05:00
mux_dra7xx.h board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM 2018-01-19 15:49:23 -05:00
mux_omap5.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
omap.h arm: dra762: Add support for device package identification 2018-01-19 15:49:26 -05:00
sata.h ARM: O5/dra7xx: Add SATA boot support 2014-02-19 10:47:45 -05:00
spl.h dra7x: boot: add dfu bootmode support 2016-09-27 23:30:20 +02:00
sys_proto.h mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions 2018-02-19 16:58:55 +09:00