u-boot

mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 10:48:51 +00:00

History

Diego Dorta 7594c51ae6 imx: Include <input.h> header file When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including <input.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>		2017-10-12 17:31:16 +02:00
..
imx6logic.c	imx: Include <input.h> header file	2017-10-12 17:31:16 +02:00
Kconfig	imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM	2017-04-12 18:59:12 +02:00
MAINTAINERS	imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM	2017-04-12 18:59:12 +02:00
Makefile	imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM	2017-04-12 18:59:12 +02:00
mx6q_2x_MT41K512M16HA.cfg	imx: reorganize IMX code as other SOCs	2017-07-12 10:17:44 +02:00
README	imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM	2017-04-12 18:59:12 +02:00

README

U-Boot for LogicPD i.MX6 Development Kit
----------------------------------------

This file contains information for the port of U-Boot to the Logic PD Development kit.

Logic PD has an i.MX6 System On Module (SOM) and a correspondong development
board.  SOM has a built-in microSD socket, DDR and NAND flash.  The development kit has
an SMSC Ethernet PHY, serial debug port and a variety of peripherals.

On the intial release, the SOM came with either an i.MX6D or i.MX6Q.

For more details about Logic PD i.MX6 Development kit, visit:
https://www.logicpd.com/

Building U-Boot for Logic PD Development Kit
--------------------------------------------
To build U-Boot for the Dual and Quad variants:

 make imx6q_logic_defconfig
 make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux-


Flashing U-Boot into the SD card
--------------------------------

See README.imximage for details on booting from SD

Flashing U-Boot into NAND
-------------------------
Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following:
with:

  kobs-ng init -v -x u-boot-dtb.imx

Additional Support Documentation can be found at:
https://support.logicpd.com/