mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
6554464951
Partial sync of rk3288.dtsi from Linux version 5.18 Changed: only properties and functions that are not yet included swap some clocks positions fix some irq numbers style and sort nodes Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
797 lines
18 KiB
Text
797 lines
18 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Google Veyron (and derivatives) board device tree source
|
|
*
|
|
* Copyright 2014 Google, Inc
|
|
*/
|
|
|
|
#include <dt-bindings/clock/rockchip,rk808.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3288.dtsi"
|
|
|
|
/ {
|
|
memory {
|
|
reg = <0x0 0x80000000>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
firmware {
|
|
chromeos {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fw_wp_ap>;
|
|
write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
brightness-levels = <
|
|
0 1 2 3 4 5 6 7
|
|
8 9 10 11 12 13 14 15
|
|
16 17 18 19 20 21 22 23
|
|
24 25 26 27 28 29 30 31
|
|
32 33 34 35 36 37 38 39
|
|
40 41 42 43 44 45 46 47
|
|
48 49 50 51 52 53 54 55
|
|
56 57 58 59 60 61 62 63
|
|
64 65 66 67 68 69 70 71
|
|
72 73 74 75 76 77 78 79
|
|
80 81 82 83 84 85 86 87
|
|
88 89 90 91 92 93 94 95
|
|
96 97 98 99 100 101 102 103
|
|
104 105 106 107 108 109 110 111
|
|
112 113 114 115 116 117 118 119
|
|
120 121 122 123 124 125 126 127
|
|
128 129 130 131 132 133 134 135
|
|
136 137 138 139 140 141 142 143
|
|
144 145 146 147 148 149 150 151
|
|
152 153 154 155 156 157 158 159
|
|
160 161 162 163 164 165 166 167
|
|
168 169 170 171 172 173 174 175
|
|
176 177 178 179 180 181 182 183
|
|
184 185 186 187 188 189 190 191
|
|
192 193 194 195 196 197 198 199
|
|
200 201 202 203 204 205 206 207
|
|
208 209 210 211 212 213 214 215
|
|
216 217 218 219 220 221 222 223
|
|
224 225 226 227 228 229 230 231
|
|
232 233 234 235 236 237 238 239
|
|
240 241 242 243 244 245 246 247
|
|
248 249 250 251 252 253 254 255>;
|
|
default-brightness-level = <128>;
|
|
enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
|
|
backlight-boot-off;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bl_en>;
|
|
pwms = <&pwm0 0 1000000 0>;
|
|
};
|
|
|
|
panel: panel {
|
|
compatible ="cnm,n116bgeea2","simple-panel";
|
|
status = "okay";
|
|
power-supply = <&vcc33_lcd>;
|
|
backlight = <&backlight>;
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwr_key_h>;
|
|
power {
|
|
label = "Power";
|
|
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_POWER>;
|
|
debounce-interval = <100>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ap_warm_reset_h>;
|
|
priority = /bits/ 8 <200>;
|
|
};
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
pinctrl-0 = <&emmc_reset>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "rockchip,rockchip-audio-max98090";
|
|
rockchip,model = "ROCKCHIP-I2S";
|
|
rockchip,i2s-controller = <&i2s>;
|
|
rockchip,audio-codec = <&max98090>;
|
|
rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
|
|
rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
|
|
rockchip,headset-codec = <&headsetcodec>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mic_det>, <&hp_det>;
|
|
};
|
|
|
|
vdd_logic: pwm-regulator {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm1 0 2000 0>;
|
|
|
|
voltage-table = <1350000 0>,
|
|
<1300000 10>,
|
|
<1250000 20>,
|
|
<1200000 31>,
|
|
<1150000 41>,
|
|
<1100000 52>,
|
|
<1050000 62>,
|
|
<1000000 72>,
|
|
< 950000 83>;
|
|
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-name = "vdd_logic";
|
|
regulator-ramp-delay = <4000>;
|
|
};
|
|
|
|
vcc33_sys: vcc33-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc33_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vccsys>;
|
|
};
|
|
|
|
vcc_5v: vcc-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc50_hdmi: vcc50-hdmi {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc50_hdmi";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc_5v>;
|
|
};
|
|
|
|
bt_regulator: bt-regulator {
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card pouplated):
|
|
* - BT_I2S_WS_BT_RFDISABLE_L
|
|
* - No connect
|
|
*/
|
|
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_enable_l>;
|
|
regulator-name = "bt_regulator";
|
|
};
|
|
|
|
wifi_regulator: wifi-regulator {
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
regulator-name = "wifi_regulator";
|
|
|
|
/* Faux input supply. See bt_regulator description. */
|
|
vin-supply = <&bt_regulator>;
|
|
};
|
|
|
|
io-domains {
|
|
compatible = "rockchip,rk3288-io-voltage-domain";
|
|
rockchip,grf = <&grf>;
|
|
|
|
audio-supply = <&vcc18_codec>;
|
|
bb-supply = <&vcc33_io>;
|
|
dvp-supply = <&vcc_18>;
|
|
flash0-supply = <&vcc18_flashio>;
|
|
gpio1830-supply = <&vcc33_io>;
|
|
gpio30-supply = <&vcc33_io>;
|
|
lcdc-supply = <&vcc33_lcd>;
|
|
sdcard-supply = <&vccio_sd>;
|
|
wifi-supply = <&vcc18_wl>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&efuse {
|
|
status = "okay";
|
|
};
|
|
|
|
&emmc {
|
|
broken-cd;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
disable-wp;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio0 {
|
|
broken-cd;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr12;
|
|
sd-uhs-sdr25;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
cap-sdio-irq;
|
|
card-external-vcc-supply = <&wifi_regulator>;
|
|
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>,
|
|
<&cru SCLK_SDIO0_SAMPLE>, <&rk808 RK808_CLKOUT1>;
|
|
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample", "card_ext_clock";
|
|
keep-power-in-suspend;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
|
|
status = "okay";
|
|
vmmc-supply = <&vcc33_sys>;
|
|
vqmmc-supply = <&vcc18_wl>;
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr12;
|
|
sd-uhs-sdr25;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
card-detect-delay = <200>;
|
|
cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
|
|
num-slots = <1>;
|
|
status = "okay";
|
|
vmmc-supply = <&vcc33_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
};
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
|
|
spi_flash: spiflash@0 {
|
|
compatible = "spidev", "jedec,spi-nor";
|
|
spi-max-frequency = <20000000>; /* Reduce for Dediprog em100 pro */
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
|
|
i2c-scl-rising-time-ns = <100>; /* 45ns measured */
|
|
|
|
rk808: pmic@1b {
|
|
compatible = "rockchip,rk808";
|
|
clock-output-names = "xin32k", "wifibt_32kin";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
reg = <0x1b>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
|
|
vcc1-supply = <&vcc33_sys>;
|
|
vcc2-supply = <&vcc33_sys>;
|
|
vcc3-supply = <&vcc33_sys>;
|
|
vcc4-supply = <&vcc33_sys>;
|
|
vcc6-supply = <&vcc_5v>;
|
|
vcc7-supply = <&vcc33_sys>;
|
|
vcc8-supply = <&vcc33_sys>;
|
|
vcc9-supply = <&vcc_5v>;
|
|
vcc10-supply = <&vcc33_sys>;
|
|
vcc11-supply = <&vcc_5v>;
|
|
vcc12-supply = <&vcc_18>;
|
|
|
|
vddio-supply = <&vcc33_io>;
|
|
|
|
regulators {
|
|
vdd_cpu: DCDC_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-name = "vdd_arm";
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
|
|
vcc135_ddr: DCDC_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc135_ddr";
|
|
regulator-suspend-mem-enabled;
|
|
};
|
|
|
|
/*
|
|
* vcc_18 has several aliases. (vcc18_flashio and
|
|
* vcc18_wl). We'll add those aliases here just to
|
|
* make it easier to follow the schematic. The signals
|
|
* are actually hooked together and only separated for
|
|
* power measurement purposes).
|
|
*/
|
|
vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_18";
|
|
regulator-suspend-mem-microvolt = <1800000>;
|
|
};
|
|
|
|
/*
|
|
* Note that both vcc33_io and vcc33_pmuio are always
|
|
* powered together. To simplify the logic in the dts
|
|
* we just refer to vcc33_io every time something is
|
|
* powered from vcc33_pmuio. In fact, on later boards
|
|
* (such as danger) they're the same net.
|
|
*/
|
|
vcc33_io: LDO_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc33_io";
|
|
regulator-suspend-mem-microvolt = <3300000>;
|
|
};
|
|
|
|
vdd_10: LDO_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-name = "vdd_10";
|
|
regulator-suspend-mem-microvolt = <1000000>;
|
|
};
|
|
|
|
vccio_sd: LDO_REG4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd";
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
|
|
vcc33_sd: LDO_REG5 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc33_sd";
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
|
|
vcc18_codec: LDO_REG6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc18_codec";
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
|
|
vdd10_lcd_pwren_h: LDO_REG7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-name = "vdd10_lcd_pwren_h";
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
|
|
vcc33_lcd: SWITCH_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc33_lcd";
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
|
|
i2c-scl-rising-time-ns = <100>; /* 40ns measured */
|
|
|
|
tpm: tpm@20 {
|
|
compatible = "infineon,slb9645tt";
|
|
reg = <0x20>;
|
|
powered-while-suspended;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
/* 100kHz since 4.7k resistors don't rise fast enough */
|
|
clock-frequency = <100000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 10ns measured */
|
|
i2c-scl-rising-time-ns = <800>; /* 600ns measured */
|
|
|
|
max98090: max98090@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
#sound-dai-cells = <0>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&int_codec>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>;
|
|
i2c-scl-rising-time-ns = <300>;
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>; /* 11ns measured */
|
|
i2c-scl-rising-time-ns = <300>; /* 225ns measured */
|
|
|
|
headsetcodec: ts3a227e@3b {
|
|
compatible = "ti,ts3a227e";
|
|
reg = <0x3b>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ts3a227e_int_l>;
|
|
ti,micbias = <7>; /* MICBIAS = 2.8V */
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <100000>;
|
|
i2c-scl-falling-time-ns = <300>;
|
|
i2c-scl-rising-time-ns = <1000>;
|
|
};
|
|
|
|
&i2s {
|
|
status = "okay";
|
|
clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
|
|
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
|
|
/* Pins don't include flow control by default; add that in */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
/* We need to go faster than 24MHz, so adjust clock parents / rates */
|
|
assigned-clocks = <&cru SCLK_UART0>;
|
|
assigned-clock-rates = <48000000>;
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&edp {
|
|
status = "okay";
|
|
rockchip,panel = <&panel>;
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
|
tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <
|
|
/* Common for sleep and wake, but no owners */
|
|
&ddr0_retention
|
|
&ddrio_pwroff
|
|
&global_pwroff
|
|
|
|
/* Wake only */
|
|
&bt_dev_wake_awake
|
|
>;
|
|
pinctrl-1 = <
|
|
/* Common for sleep and wake, but no owners */
|
|
&ddr0_retention
|
|
&ddrio_pwroff
|
|
&global_pwroff
|
|
|
|
/* Sleep only */
|
|
&bt_dev_wake_sleep
|
|
>;
|
|
|
|
/* Add this for sdmmc pins to SD card */
|
|
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
|
bias-pull-up;
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
backlight {
|
|
bl_en: bl-en {
|
|
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
buttons {
|
|
pwr_key_h: pwr-key-h {
|
|
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
codec {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
int_codec: int-codec {
|
|
rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
mic_det: mic-det {
|
|
rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
emmc {
|
|
emmc_reset: emmc-reset {
|
|
rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/*
|
|
* We run eMMC at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
emmc_clk: emmc-clk {
|
|
rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
};
|
|
|
|
headset {
|
|
ts3a227e_int_l: ts3a227e-int-l {
|
|
rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
/*
|
|
* Causes jerry to hang when probing bus 0
|
|
* rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
*/
|
|
};
|
|
};
|
|
|
|
reboot {
|
|
ap_warm_reset_h: ap-warm-reset-h {
|
|
rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdio0 {
|
|
wifi_enable_h: wifienable-h {
|
|
rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/* NOTE: mislabelled on schematic; should be bt_enable_h */
|
|
bt_enable_l: bt-enable-l {
|
|
rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/*
|
|
* We run sdio0 at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
sdio0_bus4: sdio0-bus4 {
|
|
rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
sdio0_cmd: sdio0-cmd {
|
|
rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
sdio0_clk: sdio0-clk {
|
|
rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
/*
|
|
* These pins are only present on very new veyron boards; on
|
|
* older boards bt_dev_wake is simply always high. Note that
|
|
* gpio4_26 is a NC on old veyron boards, so it doesn't hurt
|
|
* to map this pin everywhere
|
|
*/
|
|
bt_dev_wake_sleep: bt-dev-wake-sleep {
|
|
rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
|
|
bt_dev_wake_awake: bt-dev-wake-awake {
|
|
rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
|
|
sdmmc {
|
|
/*
|
|
* We run sdmmc at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
sdmmc_bus4: sdmmc-bus4 {
|
|
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
<6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
sdmmc_clk: sdmmc-clk {
|
|
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
sdmmc_cmd: sdmmc-cmd {
|
|
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
/*
|
|
* Builtin CD line is hooked to ground to prevent JTAG at boot
|
|
* (and also to get the voltage rail correct). Make we
|
|
* configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
|
|
* think there's a card inserted
|
|
*/
|
|
sdmmc_cd_disabled: sdmmc-cd-disabled {
|
|
rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/* This is where we actually hook up CD */
|
|
sdmmc_cd_gpio: sdmmc-cd-gpio {
|
|
rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
tpm {
|
|
tpm_int_h: tpm-int-h {
|
|
rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
write-protect {
|
|
fw_wp_ap: fw-wp-ap {
|
|
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
needs-reset-on-resume;
|
|
};
|
|
|
|
&usb_host1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
|
|
assigned-clock-parents = <&cru SCLK_OTGPHY0>;
|
|
};
|