Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-15 09:27:35 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/px30-ringneck.dtsi
Quentin Schulz c925be73a0 rockchip: add support for PX30 Ringneck SoM on Haikou Devkit 
The PX30-µQ7 (Ringneck) is a system-on-module featuring the Rockchip
PX30 in a micro Qseven-compatible form-factor.

PX30-µQ7 features:
        * CPU: quad-core Cortex-A35
        * DRAM: 2GB dual-channel
        * eMMC: onboard eMMC
        * SD/MMC
        * TI DP83825I 10/100Mbps PHY
        * USB:
                * USB2.0 dual role port
                * 3x USB2.0 host via onboard USB2.0 hub
        * Display: MIPI-DSI
        * Camera: MIPI-CSI
        * onboard 2.4GHz WiFi + Bluetooth module
        * Companion Controller: on-board additional microcontroller
	  (STM32 Cortex-M0 or ATtiny):
                * RTC
                * fan controller
                * CAN (only STM32)

The non-U-Boot DTS files are imported from Linux v6.2-rc2.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2023-01-16 18:01:11 +08:00

382 lines
7.4 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
*/
/dts-v1/;
#include "px30.dtsi"
#include <dt-bindings/leds/common.h>
/ {
aliases {
mmc0 = &emmc;
mmc1 = &sdio;
rtc0 = &rtc_twi;
rtc1 = &rk809;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&module_led_pin>;
status = "okay";
module_led: led-0 {
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_HEARTBEAT;
linux,default-trigger = "heartbeat";
color = <LED_COLOR_ID_AMBER>;
};
};
vcc5v0_sys: vccsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&cpu2 {
cpu-supply = <&vdd_arm>;
};
&cpu3 {
cpu-supply = <&vdd_arm>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
supports-emmc;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_emmc>;
status = "okay";
};
/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
&gmac {
snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 50000 50000>;
phy-supply = <&vcc_3v3>;
clock_in_out = "output";
};
&gpio2 {
/*
* The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
* eMMC powered-down initially (in fact it keeps the reset signal
* asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
* the SPL has been booted from SD Card.
*/
bios-disable-override-hog {
gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
output-high;
line-name = "bios_disable_override";
gpio-hog;
};
/*
* The BIOS_DISABLE hog is a feedback pin for the actual status of the
* signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually
* represents the state of a switch on the baseboard.
*/
bios-disable-n-hog {
gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
line-name = "bios_disable";
input;
gpio-hog;
};
};
&gpu {
status = "okay";
};
&i2c0 {
status = "okay";
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pmic_int>;
pinctrl-names = "default";
#clock-cells = <0>;
clock-output-names = "xin32k";
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc_3v3>;
vcc6-supply = <&vcc_3v3>;
vcc7-supply = <&vcc_3v3>;
vcc9-supply = <&vcc5v0_sys>;
regulators {
vdd_log: DCDC_REG1 {
regulator-name = "vdd_log";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
regulator-name = "vcc_3v0_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc_3v3: DCDC_REG5 {
regulator-name = "vcc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG2 {
regulator-name = "vcc_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_1v0: LDO_REG3 {
regulator-name = "vcc_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_lcd: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vcc_lcd";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_1v8_lcd: LDO_REG8 {
regulator-name = "vcc_1v8_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca_1v8: LDO_REG9 {
regulator-name = "vcca_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
};
};
};
&i2c1 {
status = "okay";
/* SE05x is limited to Fast Mode */
clock-frequency = <400000>;
fan: fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
#cooling-cells = <2>;
};
rtc_twi: rtc@6f {
compatible = "isil,isl1208";
reg = <0x6f>;
};
};
&i2c3 {
status = "okay";
};
&i2s0_8ch {
rockchip,trcm-sync-tx-only;
pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
&i2s0_8ch_sdo0 &i2s0_8ch_sdi0>;
};
&io_domains {
vccio1-supply = <&vcc_3v3>;
vccio2-supply = <&vccio_sd>;
vccio3-supply = <&vcc_3v3>;
vccio4-supply = <&vcc_3v3>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_emmc>;
vccio-oscgpi-supply = <&vcc_3v3>;
status = "okay";
};
&pinctrl {
emmc {
emmc_reset: emmc-reset {
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
module_led_pin: module-led-pin {
rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins =
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc {
vqmmc-supply = <&vccio_sd>;
};
&tsadc {
status = "okay";
};
&u2phy {
status = "okay";
};
&u2phy_host {
status = "okay";
};
/* Mule UCAN */
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&wdt {
status = "okay";
};
Reference in a new issue View git blame Copy permalink