mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
3759df0c08
In some cases when "more" is told to page a given file it will prepend the output with: :::::::::::::: /PATH/TO/THE/FILE :::::::::::::: And when this happens the output will not match the expected length. Further, if we use a different pager we will instead fail the coverage tests as we will not have 100% coverage. Update the help test to remove the string in question. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
||
---|---|---|
.. | ||
etype | ||
test | ||
.gitignore | ||
binman | ||
binman.py | ||
cmdline.py | ||
control.py | ||
elf.py | ||
elf_test.py | ||
entry_test.py | ||
fdt_test.py | ||
ftest.py | ||
image.py | ||
image_test.py | ||
README |
# Copyright (c) 2016 Google, Inc # # SPDX-License-Identifier: GPL-2.0+ # Introduction ------------ Firmware often consists of several components which must be packaged together. For example, we may have SPL, U-Boot, a device tree and an environment area grouped together and placed in MMC flash. When the system starts, it must be able to find these pieces. So far U-Boot has not provided a way to handle creating such images in a general way. Each SoC does what it needs to build an image, often packing or concatenating images in the U-Boot build system. Binman aims to provide a mechanism for building images, from simple SPL + U-Boot combinations, to more complex arrangements with many parts. What it does ------------ Binman reads your board's device tree and finds a node which describes the required image layout. It uses this to work out what to place where. The output file normally contains the device tree, so it is in principle possible to read an image and extract its constituent parts. Features -------- So far binman is pretty simple. It supports binary blobs, such as 'u-boot', 'spl' and 'fdt'. It supports empty entries (such as setting to 0xff). It can place entries at a fixed location in the image, or fit them together with suitable padding and alignment. It provides a way to process binaries before they are included, by adding a Python plug-in. The device tree is available to U-Boot at run-time so that the images can be interpreted. Binman does not yet update the device tree with the final location of everything when it is done. A simple C structure could be generated for constrained environments like SPL (using dtoc) but this is also not implemented. Binman can also support incorporating filesystems in the image if required. For example x86 platforms may use CBFS in some cases. Binman is intended for use with U-Boot but is designed to be general enough to be useful in other image-packaging situations. Motivation ---------- Packaging of firmware is quite a different task from building the various parts. In many cases the various binaries which go into the image come from separate build systems. For example, ARM Trusted Firmware is used on ARMv8 devices but is not built in the U-Boot tree. If a Linux kernel is included in the firmware image, it is built elsewhere. It is of course possible to add more and more build rules to the U-Boot build system to cover these cases. It can shell out to other Makefiles and build scripts. But it seems better to create a clear divide between building software and packaging it. At present this is handled by manual instructions, different for each board, on how to create images that will boot. By turning these instructions into a standard format, we can support making valid images for any board without manual effort, lots of READMEs, etc. Benefits: - Each binary can have its own build system and tool chain without creating any dependencies between them - Avoids the need for a single-shot build: individual parts can be updated and brought in as needed - Provides for a standard image description available in the build and at run-time - SoC-specific image-signing tools can be accomodated - Avoids cluttering the U-Boot build system with image-building code - The image description is automatically available at run-time in U-Boot, SPL. It can be made available to other software also - The image description is easily readable (it's a text file in device-tree format) and permits flexible packing of binaries Terminology ----------- Binman uses the following terms: - image - an output file containing a firmware image - binary - an input binary that goes into the image Relationship to FIT ------------------- FIT is U-Boot's official image format. It supports multiple binaries with load / execution addresses, compression. It also supports verification through hashing and RSA signatures. FIT was originally designed to support booting a Linux kernel (with an optional ramdisk) and device tree chosen from various options in the FIT. Now that U-Boot supports configuration via device tree, it is possible to load U-Boot from a FIT, with the device tree chosen by SPL. Binman considers FIT to be one of the binaries it can place in the image. Where possible it is best to put as much as possible in the FIT, with binman used to deal with cases not covered by FIT. Examples include initial execution (since FIT itself does not have an executable header) and dealing with device boundaries, such as the read-only/read-write separation in SPI flash. For U-Boot, binman should not be used to create ad-hoc images in place of FIT. Relationship to mkimage ----------------------- The mkimage tool provides a means to create a FIT. Traditionally it has needed an image description file: a device tree, like binman, but in a different format. More recently it has started to support a '-f auto' mode which can generate that automatically. More relevant to binman, mkimage also permits creation of many SoC-specific image types. These can be listed by running 'mkimage -T list'. Examples include 'rksd', the Rockchip SD/MMC boot format. The mkimage tool is often called from the U-Boot build system for this reason. Binman considers the output files created by mkimage to be binary blobs which it can place in an image. Binman does not replace the mkimage tool or this purpose. It would be possible in some situtions to create a new entry type for the images in mkimage, but this would not add functionality. It seems better to use the mkiamge tool to generate binaries and avoid blurring the boundaries between building input files (mkimage) and packaging then into a final image (binman). Example use of binman in U-Boot ------------------------------- Binman aims to replace some of the ad-hoc image creation in the U-Boot build system. Consider sunxi. It has the following steps: 1. It uses a custom mksunxiboot tool to build an SPL image called sunxi-spl.bin. This should probably move into mkimage. 2. It uses mkimage to package U-Boot into a legacy image file (so that it can hold the load and execution address) called u-boot.img. 3. It builds a final output image called u-boot-sunxi-with-spl.bin which consists of sunxi-spl.bin, some padding and u-boot.img. Binman is intended to replace the last step. The U-Boot build system builds u-boot.bin and sunxi-spl.bin. Binman can then take over creation of sunxi-spl.bin (by calling mksunxiboot, or hopefully one day mkimage). In any case, it would then create the image from the component parts. This simplifies the U-Boot Makefile somewhat, since various pieces of logic can be replaced by a call to binman. Example use of binman for x86 ----------------------------- In most cases x86 images have a lot of binary blobs, 'black-box' code provided by Intel which must be run for the platform to work. Typically these blobs are not relocatable and must be placed at fixed areas in the firmare image. Currently this is handled by ifdtool, which places microcode, FSP, MRC, VGA BIOS, reference code and Intel ME binaries into a u-boot.rom file. Binman is intended to replace all of this, with ifdtool left to handle only the configuration of the Intel-format descriptor. Running binman -------------- Type: binman -b <board_name> to build an image for a board. The board name is the same name used when configuring U-Boot (e.g. for sandbox_defconfig the board name is 'sandbox'). Binman assumes that the input files for the build are in ../b/<board_name>. Or you can specify this explicitly: binman -I <build_path> where <build_path> is the build directory containing the output of the U-Boot build. (Future work will make this more configurable) In either case, binman picks up the device tree file (u-boot.dtb) and looks for its instructions in the 'binman' node. Binman has a few other options which you can see by running 'binman -h'. Enabling binman for a board --------------------------- At present binman is invoked from a rule in the main Makefile. Typically you will have a rule like: ifneq ($(CONFIG_ARCH_<something>),) u-boot-<your_suffix>.bin: <input_file_1> <input_file_2> checkbinman FORCE $(call if_changed,binman) endif This assumes that u-boot-<your_suffix>.bin is a target, and is the final file that you need to produce. You can make it a target by adding it to ALL-y either in the main Makefile or in a config.mk file in your arch subdirectory. Once binman is executed it will pick up its instructions from a device-tree file, typically <soc>-u-boot.dtsi, where <soc> is your CONFIG_SYS_SOC value. You can use other, more specific CONFIG options - see 'Automatic .dtsi inclusion' below. Image description format ------------------------ The binman node is called 'binman'. An example image description is shown below: binman { filename = "u-boot-sunxi-with-spl.bin"; pad-byte = <0xff>; blob { filename = "spl/sunxi-spl.bin"; }; u-boot { pos = <CONFIG_SPL_PAD_TO>; }; }; This requests binman to create an image file called u-boot-sunxi-with-spl.bin consisting of a specially formatted SPL (spl/sunxi-spl.bin, built by the normal U-Boot Makefile), some 0xff padding, and a U-Boot legacy image. The padding comes from the fact that the second binary is placed at CONFIG_SPL_PAD_TO. If that line were omitted then the U-Boot binary would immediately follow the SPL binary. The binman node describes an image. The sub-nodes describe entries in the image. Each entry represents a region within the overall image. The name of the entry (blob, u-boot) tells binman what to put there. For 'blob' we must provide a filename. For 'u-boot', binman knows that this means 'u-boot.bin'. Entries are normally placed into the image sequentially, one after the other. The image size is the total size of all entries. As you can see, you can specify the start position of an entry using the 'pos' property. Note that due to a device tree requirement, all entries must have a unique name. If you want to put the same binary in the image multiple times, you can use any unique name, with the 'type' property providing the type. The attributes supported for entries are described below. pos: This sets the position of an entry within the image. The first byte of the image is normally at position 0. If 'pos' is not provided, binman sets it to the end of the previous region, or the start of the image's entry area (normally 0) if there is no previous region. align: This sets the alignment of the entry. The entry position is adjusted so that the entry starts on an aligned boundary within the image. For example 'align = <16>' means that the entry will start on a 16-byte boundary. Alignment shold be a power of 2. If 'align' is not provided, no alignment is performed. size: This sets the size of the entry. The contents will be padded out to this size. If this is not provided, it will be set to the size of the contents. pad-before: Padding before the contents of the entry. Normally this is 0, meaning that the contents start at the beginning of the entry. This can be offset the entry contents a little. Defaults to 0. pad-after: Padding after the contents of the entry. Normally this is 0, meaning that the entry ends at the last byte of content (unless adjusted by other properties). This allows room to be created in the image for this entry to expand later. Defaults to 0. align-size: This sets the alignment of the entry size. For example, to ensure that the size of an entry is a multiple of 64 bytes, set this to 64. If 'align-size' is not provided, no alignment is performed. align-end: This sets the alignment of the end of an entry. Some entries require that they end on an alignment boundary, regardless of where they start. If 'align-end' is not provided, no alignment is performed. Note: This is not yet implemented in binman. filename: For 'blob' types this provides the filename containing the binary to put into the entry. If binman knows about the entry type (like u-boot-bin), then there is no need to specify this. type: Sets the type of an entry. This defaults to the entry name, but it is possible to use any name, and then add (for example) 'type = "u-boot"' to specify the type. The attributes supported for images are described below. Several are similar to those for entries. size: Sets the image size in bytes, for example 'size = <0x100000>' for a 1MB image. align-size: This sets the alignment of the image size. For example, to ensure that the image ends on a 512-byte boundary, use 'align-size = <512>'. If 'align-size' is not provided, no alignment is performed. pad-before: This sets the padding before the image entries. The first entry will be positionad after the padding. This defaults to 0. pad-after: This sets the padding after the image entries. The padding will be placed after the last entry. This defaults to 0. pad-byte: This specifies the pad byte to use when padding in the image. It defaults to 0. To use 0xff, you would add 'pad-byte = <0xff>'. filename: This specifies the image filename. It defaults to 'image.bin'. sort-by-pos: This causes binman to reorder the entries as needed to make sure they are in increasing positional order. This can be used when your entry order may not match the positional order. A common situation is where the 'pos' properties are set by CONFIG options, so their ordering is not known a priori. This is a boolean property so needs no value. To enable it, add a line 'sort-by-pos;' to your description. multiple-images: Normally only a single image is generated. To create more than one image, put this property in the binman node. For example, this will create image1.bin containing u-boot.bin, and image2.bin containing both spl/u-boot-spl.bin and u-boot.bin: binman { multiple-images; image1 { u-boot { }; }; image2 { spl { }; u-boot { }; }; }; end-at-4gb: For x86 machines the ROM positions start just before 4GB and extend up so that the image finished at the 4GB boundary. This boolean option can be enabled to support this. The image size must be provided so that binman knows when the image should start. For an 8MB ROM, the position of the first entry would be 0xfff80000 with this option, instead of 0 without this option. Examples of the above options can be found in the tests. See the tools/binman/test directory. Special properties ------------------ Some entries support special properties, documented here: u-boot-with-ucode-ptr: optional-ucode: boolean property to make microcode optional. If the u-boot.bin image does not include microcode, no error will be generated. Order of image creation ----------------------- Image creation proceeds in the following order, for each entry in the image. 1. GetEntryContents() - the contents of each entry are obtained, normally by reading from a file. This calls the Entry.ObtainContents() to read the contents. The default version of Entry.ObtainContents() calls Entry.GetDefaultFilename() and then reads that file. So a common mechanism to select a file to read is to override that function in the subclass. The functions must return True when they have read the contents. Binman will retry calling the functions a few times if False is returned, allowing dependencies between the contents of different entries. 2. GetEntryPositions() - calls Entry.GetPositions() for each entry. This can return a dict containing entries that need updating. The key should be the entry name and the value is a tuple (pos, size). This allows an entry to provide the position and size for other entries. The default implementation of GetEntryPositions() returns {}. 3. PackEntries() - calls Entry.Pack() which figures out the position and size of an entry. The 'current' image position is passed in, and the function returns the position immediately after the entry being packed. The default implementation of Pack() is usually sufficient. 4. CheckSize() - checks that the contents of all the entries fits within the image size. If the image does not have a defined size, the size is set large enough to hold all the entries. 5. CheckEntries() - checks that the entries do not overlap, nor extend outside the image. 6. ProcessEntryContents() - this calls Entry.ProcessContents() on each entry. The default implementatoin does nothing. This can be overriden to adjust the contents of an entry in some way. For example, it would be possible to create an entry containing a hash of the contents of some other entries. At this stage the position and size of entries should not be adjusted. 6. WriteEntryInfo() 7. BuildImage() - builds the image and writes it to a file. This is the final step. Automatic .dtsi inclusion ------------------------- It is sometimes inconvenient to add a 'binman' node to the .dts file for each board. This can be done by using #include to bring in a common file. Another approach supported by the U-Boot build system is to automatically include a common header. You can then put the binman node (and anything else that is specific to U-Boot, such as u-boot,dm-pre-reloc properies) in that header file. Binman will search for the following files in arch/<arch>/dts: <dts>-u-boot.dtsi where <dts> is the base name of the .dts file <CONFIG_SYS_SOC>-u-boot.dtsi <CONFIG_SYS_CPU>-u-boot.dtsi <CONFIG_SYS_VENDOR>-u-boot.dtsi u-boot.dtsi U-Boot will only use the first one that it finds. If you need to include a more general file you can do that from the more specific file using #include. If you are having trouble figuring out what is going on, you can uncomment the 'warning' line in scripts/Makefile.lib to see what it has found: # Uncomment for debugging # This shows all the files that were considered and the one that we chose. # u_boot_dtsi_options_debug = $(u_boot_dtsi_options_raw) Access to binman entry positions at run time -------------------------------------------- Binman assembles images and determines where each entry is placed in the image. This information may be useful to U-Boot at run time. For example, in SPL it is useful to be able to find the location of U-Boot so that it can be executed when SPL is finished. Binman allows you to declare symbols in the SPL image which are filled in with their correct values during the build. For example: binman_sym_declare(ulong, u_boot_any, pos); declares a ulong value which will be assigned to the position of any U-Boot image (u-boot.bin, u-boot.img, u-boot-nodtb.bin) that is present in the image. You can access this value with something like: ulong u_boot_pos = binman_sym(ulong, u_boot_any, pos); Thus u_boot_pos will be set to the position of U-Boot in memory, assuming that the whole image has been loaded, or is available in flash. You can then jump to that address to start U-Boot. At present this feature is only supported in SPL. In principle it is possible to fill in such symbols in U-Boot proper, as well. Code coverage ------------- Binman is a critical tool and is designed to be very testable. Entry implementations target 100% test coverage. Run 'binman -T' to check this. To enable Python test coverage on Debian-type distributions (e.g. Ubuntu): $ sudo apt-get install python-pip python-pytest $ sudo pip install coverage Advanced Features / Technical docs ---------------------------------- The behaviour of entries is defined by the Entry class. All other entries are a subclass of this. An important subclass is Entry_blob which takes binary data from a file and places it in the entry. In fact most entry types are subclasses of Entry_blob. Each entry type is a separate file in the tools/binman/etype directory. Each file contains a class called Entry_<type> where <type> is the entry type. New entry types can be supported by adding new files in that directory. These will automatically be detected by binman when needed. Entry properties are documented in entry.py. The entry subclasses are free to change the values of properties to support special behaviour. For example, when Entry_blob loads a file, it sets content_size to the size of the file. Entry classes can adjust other entries. For example, an entry that knows where other entries should be positioned can set up those entries' positions so they don't need to be set in the binman decription. It can also adjust entry contents. Most of the time such essoteric behaviour is not needed, but it can be essential for complex images. If you need to specify a particular device-tree compiler to use, you can define the DTC environment variable. This can be useful when the system dtc is too old. History / Credits ----------------- Binman takes a lot of inspiration from a Chrome OS tool called 'cros_bundle_firmware', which I wrote some years ago. That tool was based on a reasonably simple and sound design but has expanded greatly over the years. In particular its handling of x86 images is convoluted. Quite a few lessons have been learned which are hopefully be applied here. Design notes ------------ On the face of it, a tool to create firmware images should be fairly simple: just find all the input binaries and place them at the right place in the image. The difficulty comes from the wide variety of input types (simple flat binaries containing code, packaged data with various headers), packing requirments (alignment, spacing, device boundaries) and other required features such as hierarchical images. The design challenge is to make it easy to create simple images, while allowing the more complex cases to be supported. For example, for most images we don't much care exactly where each binary ends up, so we should not have to specify that unnecessarily. New entry types should aim to provide simple usage where possible. If new core features are needed, they can be added in the Entry base class. To do ----- Some ideas: - Fill out the device tree to include the final position and size of each entry (since the input file may not always specify these). See also 'Access to binman entry positions at run time' above - Use of-platdata to make the information available to code that is unable to use device tree (such as a very small SPL image) - Write an image map to a text file - Allow easy building of images by specifying just the board name - Produce a full Python binding for libfdt (for upstream) - Add an option to decode an image into the constituent binaries - Suppoort hierarchical images (packing of binaries into another binary which is then placed in the image) - Support building an image for a board (-b) more completely, with a configurable build directory - Consider making binman work with buildman, although if it is used in the Makefile, this will be automatic - Implement align-end -- Simon Glass <sjg@chromium.org> 7/7/2016