mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
95c69223f9
Extend the documentation of the fec_mxc configuration by describing its ability to read the ethaddr MAC address from the SoC eFuses. Also add an example how to program the fuses for an imx5 to clarify the byte order. Cc: Stefano Babic <sbabic at denx.de> Cc: Marek Vasut <marex at denx.de> Signed-off-by: Olaf Mandel <o.mandel at menlosystems.com>
40 lines
1.6 KiB
Text
40 lines
1.6 KiB
Text
U-Boot for Freescale i.MX5x
|
|
|
|
This file contains information for the port of U-Boot to the Freescale
|
|
i.MX5x SoCs.
|
|
|
|
1. CONFIGURATION OPTIONS/SETTINGS
|
|
---------------------------------
|
|
|
|
1.1 CONFIG_MX51_PLL_ERRATA: Workaround for i.MX51 PLL errata.
|
|
This option should be enabled by all boards using the i.MX51 silicon
|
|
version up until (including) 3.0 running at 800MHz.
|
|
The PLL's in the i.MX51 processor can go out of lock due to a metastable
|
|
condition in an analog flip-flop when used at high frequencies.
|
|
This workaround implements an undocumented feature in the PLL (dither
|
|
mode), which causes the effect of this failure to be much lower (in terms
|
|
of frequency deviation), avoiding system failure, or at least decreasing
|
|
the likelihood of system failure.
|
|
|
|
1.2 CONFIG_SYS_MAIN_PWR_ON: Trigger MAIN_PWR_ON upon startup.
|
|
This option should be enabled for boards having a SYS_ON_OFF_CTL signal
|
|
connected to GPIO1[23] and triggering the MAIN_PWR_ON signal like in the
|
|
reference designs.
|
|
|
|
2. CONVENTIONS FOR FUSE ASSIGNMENTS
|
|
-----------------------------------
|
|
|
|
2.1 MAC Address: It is stored in the words 9 to 14 of fuse bank 1, using the
|
|
natural MAC byte order (i.e. MSB first).
|
|
|
|
This is an example how to program an example MAC address 01:23:45:67:89:ab
|
|
into the eFuses. Assure that the programming voltage is available and then
|
|
execute:
|
|
|
|
=> fuse prog -y 1 9 01 23 45 67 89 ab
|
|
|
|
After programming a MAC address, consider locking the MAC fuses. This is
|
|
done by programming the MAC_ADDR_LOCK fuse, which is bit 4 of word 0 in
|
|
bank 1:
|
|
|
|
=> fuse prog -y 1 0 10
|