mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
c08349e77c
Signed-off-by: Gray Remlin <gryrmln@gmail.com>
174 lines
5.5 KiB
C
174 lines
5.5 KiB
C
/*
|
|
* Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
|
|
*
|
|
* Written-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(CONFIG_ORION5X)
|
|
#include <asm/arch/orion5x.h>
|
|
#elif defined(CONFIG_KIRKWOOD)
|
|
#include <asm/arch/kirkwood.h>
|
|
#endif
|
|
|
|
/* SATA port registers */
|
|
struct mvsata_port_registers {
|
|
u32 reserved0[10];
|
|
u32 edma_cmd;
|
|
u32 reserved1[181];
|
|
/* offset 0x300 : ATA Interface registers */
|
|
u32 sstatus;
|
|
u32 serror;
|
|
u32 scontrol;
|
|
u32 ltmode;
|
|
u32 phymode3;
|
|
u32 phymode4;
|
|
u32 reserved2[5];
|
|
u32 phymode1;
|
|
u32 phymode2;
|
|
u32 bist_cr;
|
|
u32 bist_dw1;
|
|
u32 bist_dw2;
|
|
u32 serrorintrmask;
|
|
};
|
|
|
|
/*
|
|
* Sanity checks:
|
|
* - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR.
|
|
* - for ide_preinit to make sense, we need at least one of
|
|
* CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET;
|
|
* - for ide_preinit to be called, we need CONFIG_IDE_PREINIT.
|
|
* Fail with an explanation message if these conditions are not met.
|
|
* This is particularly important for CONFIG_IDE_PREINIT, because
|
|
* its lack would not cause a build error.
|
|
*/
|
|
|
|
#if !defined(CONFIG_SYS_ATA_BASE_ADDR)
|
|
#error CONFIG_SYS_ATA_BASE_ADDR must be defined
|
|
#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \
|
|
&& !defined(CONFIG_SYS_ATA_IDE1_OFFSET)
|
|
#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \
|
|
must be defined
|
|
#elif !defined(CONFIG_IDE_PREINIT)
|
|
#error CONFIG_IDE_PREINIT must be defined
|
|
#endif
|
|
|
|
/*
|
|
* Masks and values for SControl DETection and Interface Power Management,
|
|
* and for SStatus DETection.
|
|
*/
|
|
|
|
#define MVSATA_EDMA_CMD_ATA_RST 0x00000004
|
|
#define MVSATA_SCONTROL_DET_MASK 0x0000000F
|
|
#define MVSATA_SCONTROL_DET_NONE 0x00000000
|
|
#define MVSATA_SCONTROL_DET_INIT 0x00000001
|
|
#define MVSATA_SCONTROL_IPM_MASK 0x00000F00
|
|
#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED 0x00000300
|
|
#define MVSATA_SCONTROL_MASK \
|
|
(MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK)
|
|
#define MVSATA_PORT_INIT \
|
|
(MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
|
|
#define MVSATA_PORT_USE \
|
|
(MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
|
|
#define MVSATA_SSTATUS_DET_MASK 0x0000000F
|
|
#define MVSATA_SSTATUS_DET_DEVCOMM 0x00000003
|
|
|
|
/*
|
|
* Status codes to return to client callers. Currently, callers ignore
|
|
* exact value and only care for zero or nonzero, so no need to make this
|
|
* public, it is only #define'd for clarity.
|
|
* If/when standard negative codes are implemented in U-boot, then these
|
|
* #defines should be moved to, or replaced by ones from, the common list
|
|
* of status codes.
|
|
*/
|
|
|
|
#define MVSATA_STATUS_OK 0
|
|
#define MVSATA_STATUS_TIMEOUT -1
|
|
|
|
/*
|
|
* Initialize one MVSATAHC port: set SControl's IPM to "always active"
|
|
* and DET to "reset", then wait for SStatus's DET to become "device and
|
|
* comm ok" (or time out after 50 us if no device), then set SControl's
|
|
* DET back to "no action".
|
|
*/
|
|
|
|
static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
|
|
{
|
|
u32 control;
|
|
u32 status;
|
|
u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */
|
|
|
|
/* Hard reset */
|
|
writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd);
|
|
udelay(25); /* taken from original marvell port */
|
|
writel(0, &port->edma_cmd);
|
|
|
|
/* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
|
|
control = readl(&port->scontrol);
|
|
control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
|
|
writel(control, &port->scontrol);
|
|
/* Toggle control DET back to 0 (normal operation) */
|
|
control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
|
|
writel(control, &port->scontrol);
|
|
/* wait for status DET to become 3 (device and communication OK) */
|
|
while (--timeleft) {
|
|
status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK;
|
|
if (status == MVSATA_SSTATUS_DET_DEVCOMM)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
/* return success or time-out error depending on time left */
|
|
if (!timeleft)
|
|
return MVSATA_STATUS_TIMEOUT;
|
|
return MVSATA_STATUS_OK;
|
|
}
|
|
|
|
/*
|
|
* ide_preinit() will be called by ide_init in cmd_ide.c and will
|
|
* reset the MVSTATHC ports needed by the board.
|
|
*/
|
|
|
|
int ide_preinit(void)
|
|
{
|
|
int ret = MVSATA_STATUS_TIMEOUT;
|
|
int status;
|
|
|
|
/* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
|
|
#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
|
|
status = mvsata_ide_initialize_port(
|
|
(struct mvsata_port_registers *)
|
|
(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
|
|
if (status == MVSATA_STATUS_OK)
|
|
ret = MVSATA_STATUS_OK;
|
|
#endif
|
|
/* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
|
|
#if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
|
|
status = mvsata_ide_initialize_port(
|
|
(struct mvsata_port_registers *)
|
|
(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
|
|
if (status == MVSATA_STATUS_OK)
|
|
ret = MVSATA_STATUS_OK;
|
|
#endif
|
|
/* Return success if at least one port initialization succeeded */
|
|
return ret;
|
|
}
|