u-boot/arch/x86/cpu/ivybridge/car.S
Simon Glass c72f74e278 x86: ivybridge: Update microcode early in boot
At present the normal update (which happens much later) does not work. This
seems to have something to do with the 'no eviction' mode in the CAR, or at
least moving the microcode update after that causes it not to work.

For now, do an update early on so that it definitely works. Also refuse to
continue unless the microcode update check (later in boot) is successful.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:25:02 -08:00

240 lines
5.3 KiB
ArmAsm

/*
* Copyright (c) 2014 Google, Inc
*
* From Coreboot file cpu/intel/model_206ax/cache_as_ram.inc
*
* Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com>
* Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan)
* Copyright (C) 2007-2008 coresystems GmbH
* Copyright (C) 2012 Kyösti Mälkki <kyosti.malkki@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <asm/msr-index.h>
#include <asm/mtrr.h>
#include <asm/post.h>
#include <asm/processor-flags.h>
#include <asm/arch/microcode.h>
#define MTRR_PHYS_BASE_MSR(reg) (0x200 + 2 * (reg))
#define MTRR_PHYS_MASK_MSR(reg) (0x200 + 2 * (reg) + 1)
#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE
#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE
/* Cache 4GB - MRC_SIZE_KB for MRC */
#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1)
#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES)
#define CACHE_MRC_MASK (~CACHE_MRC_BYTES)
#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1)
#define NOEVICTMOD_MSR 0x2e0
/*
* Note: ebp must not be touched in this code as it holds the BIST
* value (built-in self test). We preserve this value until it can
* be written to global_data when CAR is ready for use.
*/
.globl car_init
car_init:
post_code(POST_CAR_START)
/* Send INIT IPI to all excluding ourself */
movl $0x000C4500, %eax
movl $0xFEE00300, %esi
movl %eax, (%esi)
/* TODO: Load microcode later - the 'no eviction' mode breaks this */
movl $MSR_IA32_UCODE_WRITE, %ecx
xorl %edx, %edx
movl $_dt_ucode_base_size, %eax
movl (%eax), %eax
addl $UCODE_HEADER_LEN, %eax
wrmsr
post_code(POST_CAR_SIPI)
/* Zero out all fixed range and variable range MTRRs */
movl $mtrr_table, %esi
movl $((mtrr_table_end - mtrr_table) / 2), %edi
xorl %eax, %eax
xorl %edx, %edx
clear_mtrrs:
movw (%esi), %bx
movzx %bx, %ecx
wrmsr
add $2, %esi
dec %edi
jnz clear_mtrrs
post_code(POST_CAR_MTRR)
/* Configure the default memory type to uncacheable */
movl $MTRR_DEF_TYPE_MSR, %ecx
rdmsr
andl $(~0x00000cff), %eax
wrmsr
post_code(POST_CAR_UNCACHEABLE)
/* Set Cache-as-RAM base address */
movl $(MTRR_PHYS_BASE_MSR(0)), %ecx
movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax
xorl %edx, %edx
wrmsr
post_code(POST_CAR_BASE_ADDRESS)
/* Set Cache-as-RAM mask */
movl $(MTRR_PHYS_MASK_MSR(0)), %ecx
movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax
movl $CPU_PHYSMASK_HI, %edx
wrmsr
post_code(POST_CAR_MASK)
/* Enable MTRR */
movl $MTRR_DEF_TYPE_MSR, %ecx
rdmsr
orl $MTRR_DEF_TYPE_EN, %eax
wrmsr
/* Enable cache (CR0.CD = 0, CR0.NW = 0) */
movl %cr0, %eax
andl $(~(X86_CR0_CD | X86_CR0_NW)), %eax
invd
movl %eax, %cr0
/* enable the 'no eviction' mode */
movl $NOEVICTMOD_MSR, %ecx
rdmsr
orl $1, %eax
andl $~2, %eax
wrmsr
/* Clear the cache memory region. This will also fill up the cache */
movl $CACHE_AS_RAM_BASE, %esi
movl %esi, %edi
movl $(CACHE_AS_RAM_SIZE / 4), %ecx
xorl %eax, %eax
rep stosl
/* enable the 'no eviction run' state */
movl $NOEVICTMOD_MSR, %ecx
rdmsr
orl $3, %eax
wrmsr
post_code(POST_CAR_FILL)
/* Enable Cache-as-RAM mode by disabling cache */
movl %cr0, %eax
orl $X86_CR0_CD, %eax
movl %eax, %cr0
/* Enable cache for our code in Flash because we do XIP here */
movl $MTRR_PHYS_BASE_MSR(1), %ecx
xorl %edx, %edx
movl $car_init_ret, %eax
andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax
orl $MTRR_TYPE_WRPROT, %eax
wrmsr
movl $MTRR_PHYS_MASK_MSR(1), %ecx
movl $CPU_PHYSMASK_HI, %edx
movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax
wrmsr
post_code(POST_CAR_ROM_CACHE)
#ifdef CONFIG_CACHE_MRC_BIN
/* Enable caching for ram init code to run faster */
movl $MTRR_PHYS_BASE_MSR(2), %ecx
movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax
xorl %edx, %edx
wrmsr
movl $MTRR_PHYS_MASK_MSR(2), %ecx
movl $(CACHE_MRC_MASK | MTRR_PHYS_MASK_VALID), %eax
movl $CPU_PHYSMASK_HI, %edx
wrmsr
#endif
post_code(POST_CAR_MRC_CACHE)
/* Enable cache */
movl %cr0, %eax
andl $(~(X86_CR0_CD | X86_CR0_NW)), %eax
movl %eax, %cr0
post_code(POST_CAR_CPU_CACHE)
/* All CPUs need to be in Wait for SIPI state */
wait_for_sipi:
movl (%esi), %eax
bt $12, %eax
jc wait_for_sipi
/* return */
jmp car_init_ret
.globl car_uninit
car_uninit:
/* Disable cache */
movl %cr0, %eax
orl $X86_CR0_CD, %eax
movl %eax, %cr0
/* Disable MTRRs */
movl $MTRR_DEF_TYPE_MSR, %ecx
rdmsr
andl $(~MTRR_DEF_TYPE_EN), %eax
wrmsr
/* Disable the no-eviction run state */
movl NOEVICTMOD_MSR, %ecx
rdmsr
andl $~2, %eax
wrmsr
invd
/* Disable the no-eviction mode */
rdmsr
andl $~1, %eax
wrmsr
#ifdef CONFIG_CACHE_MRC_BIN
/* Clear the MTRR that was used to cache MRC */
xorl %eax, %eax
xorl %edx, %edx
movl $MTRR_PHYS_BASE_MSR(2), %ecx
wrmsr
movl $MTRR_PHYS_MASK_MSR(2), %ecx
wrmsr
#endif
/* Enable MTRRs */
movl $MTRR_DEF_TYPE_MSR, %ecx
rdmsr
orl $MTRR_DEF_TYPE_EN, %eax
wrmsr
invd
ret
mtrr_table:
/* Fixed MTRRs */
.word 0x250, 0x258, 0x259
.word 0x268, 0x269, 0x26A
.word 0x26B, 0x26C, 0x26D
.word 0x26E, 0x26F
/* Variable MTRRs */
.word 0x200, 0x201, 0x202, 0x203
.word 0x204, 0x205, 0x206, 0x207
.word 0x208, 0x209, 0x20A, 0x20B
.word 0x20C, 0x20D, 0x20E, 0x20F
.word 0x210, 0x211, 0x212, 0x213
mtrr_table_end:
.align 4
_dt_ucode_base_size:
/* These next two fields are filled in by ifdtool */
.long 0 /* microcode base */
.long 0 /* microcode size */