u-boot/test
Tom Rini 92329e2413 Xilinx/FPGA changes for v2020.04
ARM64:
 - Add INIT_SPL_RELATIVE dependency
 
 SPL:
 - FIT image fix
 - Enable customization of bl2_plat_get_bl31_params()
 
 Pytest:
 - Add test for octal/hex conversions
 
 Microblaze:
 - Fix manual relocation for one SPI instance
 
 Nand:
 - Convert zynq/zynqmp drivers to DM
 
 Xilinx:
 - Enable boot script location via Kconfig
 - Support OF_SEPARATE in board FDT selection
 - Remove low level uart setup it is done later by code
 - Add support for DEVICE_TREE variable passing for SPL
 
 Zynq:
 - Enable jtag boot mode via distro boot
 - Removing unused baseaddresses from hardware.h
 - DT fixups
 
 ZynqMP:
 - Fix emmc boot sequence
 - Simplify spl logic around bss and board_init_r()
 - Support psu_post_config_data() calling
 - Tune mini-nand DTS
 - Fix psu wiring for a2197 boards
 - Add runtime MMC device boot order filling in spl
 - Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
 - Add support u-boot.its generation
 - Use single image configuration for all platforms
 - Enable PANIC_HANG via Kconfig
 - DT fixups
 - Firmware fixes
 - Add support for zcu208 and zcu1285
 
 Versal:
 - Fix emmc boot sequence
 - Enable board_late_init() by default
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXiAK2AAKCRDKSWXLKUoM
 IX3VAJ41GJXBwP7Z9hX9RFhsqOu0M+NdegCdFvMUaCQ1bSvgAMOnDL+JeB21+Qo=
 =qSbv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.04

ARM64:
- Add INIT_SPL_RELATIVE dependency

SPL:
- FIT image fix
- Enable customization of bl2_plat_get_bl31_params()

Pytest:
- Add test for octal/hex conversions

Microblaze:
- Fix manual relocation for one SPI instance

Nand:
- Convert zynq/zynqmp drivers to DM

Xilinx:
- Enable boot script location via Kconfig
- Support OF_SEPARATE in board FDT selection
- Remove low level uart setup it is done later by code
- Add support for DEVICE_TREE variable passing for SPL

Zynq:
- Enable jtag boot mode via distro boot
- Removing unused baseaddresses from hardware.h
- DT fixups

ZynqMP:
- Fix emmc boot sequence
- Simplify spl logic around bss and board_init_r()
- Support psu_post_config_data() calling
- Tune mini-nand DTS
- Fix psu wiring for a2197 boards
- Add runtime MMC device boot order filling in spl
- Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
- Add support u-boot.its generation
- Use single image configuration for all platforms
- Enable PANIC_HANG via Kconfig
- DT fixups
- Firmware fixes
- Add support for zcu208 and zcu1285

Versal:
- Fix emmc boot sequence
- Enable board_late_init() by default
2020-01-16 09:45:40 -05:00
..
dm dm: Increased separation of ofdata_to_platdata() and probe methods 2020-01-09 08:52:21 -05:00
env cmd_ut: add a parameter prefix to the function cmd_ut_category 2020-01-07 11:13:25 -05:00
fs fs-test.sh: Update to use 'host' not 'sb' 2018-11-26 08:25:31 -05:00
image test: Update test-imagetools.sh to match new syntax 2019-03-08 11:31:44 -05:00
lib cmd_ut: add a parameter prefix to the function cmd_ut_category 2020-01-07 11:13:25 -05:00
log log: Add helpers for common log levels 2018-10-09 04:40:26 -06:00
optee cmd_ut: add a parameter prefix to the function cmd_ut_category 2020-01-07 11:13:25 -05:00
overlay cmd_ut: add a parameter prefix to the function cmd_ut_category 2020-01-07 11:13:25 -05:00
py Xilinx/FPGA changes for v2020.04 2020-01-16 09:45:40 -05:00
stdint Remove <inttypes.h> includes and PRI* usages in printf() entirely 2018-09-10 20:48:17 -04:00
trace SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
bloblist.c cmd_ut: add a parameter prefix to the function cmd_ut_category 2020-01-07 11:13:25 -05:00
cmd_ut.c test/cmd_ut.c: fix cmd_ut_category 2020-01-10 14:18:26 -05:00
command_ut.c common: Move command functions out of common.h 2019-12-02 18:25:02 -05:00
common.sh test: Add a test for command repeat 2014-09-24 18:30:28 -04:00
compression.c cmd_ut: add a parameter prefix to the function cmd_ut_category 2020-01-07 11:13:25 -05:00
Kconfig test: add asn1 unit test 2019-12-06 16:44:20 -05:00
Makefile test: Add a simple test for bloblist 2018-11-26 08:25:33 -05:00
print_ut.c lib/vsprintf: allow printing upper case GUIDs 2019-06-07 10:52:30 -04:00
README test: Add a 'make qcheck' target for quicker testing 2018-11-29 09:30:05 -07:00
run binman: Convert to use ArgumentParser 2019-07-24 12:54:07 -07:00
time_ut.c common: Move get_ticks() function out of common.h 2019-12-02 18:23:13 -05:00
unicode_ut.c cmd_ut: add a parameter prefix to the function cmd_ut_category 2020-01-07 11:13:25 -05:00
ut.c test: Add functions to find the amount of allocated memory 2020-01-07 16:02:38 -07:00

Testing in U-Boot
=================

U-Boot has a large amount of code. This file describes how this code is
tested and what tests you should write when adding a new feature.


Running tests
-------------

To run most tests on sandbox, type this:

    make check

in the U-Boot directory. Note that only the pytest suite is run using this
command.

Some tests take ages to run. To run just the quick ones, type this:

    make qcheck


Sandbox
-------
U-Boot can be built as a user-space application (e.g. for Linux). This
allows test to be executed without needing target hardware. The 'sandbox'
target provides this feature and it is widely used in tests.


Pytest Suite
------------

Many tests are available using the pytest suite, in test/py. This can run
either on sandbox or on real hardware. It relies on the U-Boot console to
inject test commands and check the result. It is slower to run than C code,
but provides the ability to unify lots of tests and summarise their results.

You can run the tests on sandbox with:

	./test/py/test.py --bd sandbox --build

This will produce HTML output in build-sandbox/test-log.html

See test/py/README.md for more information about the pytest suite.


tbot
----

Tbot provides a way to execute tests on target hardware. It is intended for
trying out both U-Boot and Linux (and potentially other software) on a
number of boards automatically. It can be used to create a continuous test
environment. See http://www.tbot.tools for more information.


Ad-hoc tests
------------

There are several ad-hoc tests which run outside the pytest environment:

   test/fs	- File system test (shell script)
   test/image	- FIT and legacy image tests (shell script and Python)
   test/stdint	- A test that stdint.h can be used in U-Boot (shell script)
   trace	- Test for the tracing feature (shell script)

TODO: Move these into pytest.


When to write tests
-------------------

If you add code to U-Boot without a test you are taking a risk. Even if you
perform thorough manual testing at the time of submission, it may break when
future changes are made to U-Boot. It may even break when applied to mainline,
if other changes interact with it. A good mindset is that untested code
probably doesn't work and should be deleted.

You can assume that the Pytest suite will be run before patches are accepted
to mainline, so this provides protection against future breakage.

On the other hand there is quite a bit of code that is not covered with tests,
or is covered sparingly. So here are some suggestions:

- If you are adding a new uclass, add a sandbox driver and a test that uses it
- If you are modifying code covered by an existing test, add a new test case
  to cover your changes
- If the code you are modifying has not tests, consider writing one. Even a
  very basic test is useful, and may be picked up and enhanced by others. It
  is much easier to add onto a test - writing a new large test can seem
  daunting to most contributors.


Future work
-----------

Converting existing shell scripts into pytest tests.