mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-28 18:32:08 +00:00
ba1fa2abde
The main issue the driver addresses is that a USB hub needs to be
powered before it can be discovered. This is often solved by using
"regulator-always-on".
This driver is inspired by the Linux v6.1 driver. It only enables (or
disables) the hub vdd (3v3) supply, so it can be enumerated.
Scanning of the device tree is done in a similar manner to the sandbox,
by the usb-uclass. DT part looks like:
&usbh_ehci {
...
#address-cells = <1>;
#size-cells = <0>;
hub@1 {
compatible = "usb424,2514";
reg = <1>;
vdd-supply = <&v3v3>;
};
};
When the bus gets probed, the driver is automatically probed/removed from
the bus tree, as an example on stm32:
STM32MP> usb start
starting USB...
STM32MP> dm tree
Class Index Probed Driver Name
-----------------------------------------------------------
usb 0 [ + ] ehci_generic | |-- usb@5800d000
usb_hub 0 [ + ] usb_onboard_hub | | `-- hub@1
usb_hub 1 [ + ] usb_hub | | `-- usb_hub
STM32MP> usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 2mA)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
112 lines
3.1 KiB
Makefile
112 lines
3.1 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# (C) Copyright 2004-2006
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
# core
|
|
ifndef CONFIG_SPL_BUILD
|
|
obj-y += init/
|
|
obj-y += main.o
|
|
obj-y += exports.o
|
|
obj-$(CONFIG_HUSH_PARSER) += cli_hush.o
|
|
obj-$(CONFIG_AUTOBOOT) += autoboot.o
|
|
|
|
# # boards
|
|
obj-y += board_f.o
|
|
obj-y += board_r.o
|
|
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
|
|
obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o
|
|
|
|
obj-$(CONFIG_FDT_SIMPLEFB) += fdt_simplefb.o
|
|
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
|
|
obj-$(CONFIG_MII) += miiphyutil.o
|
|
obj-$(CONFIG_CMD_MII) += miiphyutil.o
|
|
obj-$(CONFIG_PHYLIB) += miiphyutil.o
|
|
|
|
obj-$(CONFIG_USB_HOST) += usb.o usb_hub.o
|
|
obj-$(CONFIG_USB_GADGET) += usb.o usb_hub.o
|
|
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
|
|
obj-$(CONFIG_USB_ONBOARD_HUB) += usb_onboard_hub.o
|
|
|
|
# others
|
|
obj-$(CONFIG_CONSOLE_MUX) += iomux.o
|
|
obj-$(CONFIG_MTD_NOR_FLASH) += flash.o
|
|
obj-$(CONFIG_CMD_KGDB) += kgdb.o kgdb_stubs.o
|
|
obj-$(CONFIG_I2C_EDID) += edid.o
|
|
obj-$(CONFIG_KALLSYMS) += kallsyms.o
|
|
obj-y += splash.o
|
|
obj-$(CONFIG_SPLASH_SOURCE) += splash_source.o
|
|
obj-$(CONFIG_MENU) += menu.o
|
|
obj-$(CONFIG_UPDATE_COMMON) += update.o
|
|
obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
|
|
obj-$(CONFIG_CMDLINE) += cli_readline.o cli_simple.o
|
|
|
|
endif # !CONFIG_SPL_BUILD
|
|
|
|
obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o
|
|
obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
|
|
|
|
ifdef CONFIG_SPL_BUILD
|
|
ifdef CONFIG_SPL_DFU
|
|
obj-$(CONFIG_DFU_OVER_USB) += dfu.o
|
|
endif
|
|
obj-$(CONFIG_SPL_NET) += miiphyutil.o
|
|
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
|
|
|
|
obj-$(CONFIG_SPL_USB_HOST) += usb.o usb_hub.o
|
|
obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
|
|
obj-$(CONFIG_SPL_MUSB_NEW) += usb.o
|
|
endif # CONFIG_SPL_BUILD
|
|
|
|
#others
|
|
obj-$(CONFIG_DDR_SPD) += ddr_spd.o
|
|
obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o
|
|
obj-$(CONFIG_HWCONFIG) += hwconfig.o
|
|
obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
|
|
ifdef CONFIG_SPL_BUILD
|
|
ifdef CONFIG_TPL_BUILD
|
|
obj-$(CONFIG_TPL_SERIAL) += console.o
|
|
else
|
|
obj-$(CONFIG_SPL_SERIAL) += console.o
|
|
endif
|
|
else
|
|
obj-y += console.o
|
|
endif # CONFIG_SPL_BUILD
|
|
|
|
obj-$(CONFIG_CROS_EC) += cros_ec.o
|
|
obj-y += dlmalloc.o
|
|
ifdef CONFIG_SYS_MALLOC_F
|
|
ifneq ($(CONFIG_$(SPL_TPL_)SYS_MALLOC_F_LEN),0)
|
|
obj-y += malloc_simple.o
|
|
endif
|
|
endif
|
|
|
|
obj-$(CONFIG_CYCLIC) += cyclic.o
|
|
obj-$(CONFIG_$(SPL_TPL_)EVENT) += event.o
|
|
|
|
obj-$(CONFIG_$(SPL_TPL_)HASH) += hash.o
|
|
obj-$(CONFIG_IO_TRACE) += iotrace.o
|
|
obj-y += memsize.o
|
|
obj-y += stdio.o
|
|
|
|
ifdef CONFIG_CMD_EEPROM_LAYOUT
|
|
obj-y += eeprom/eeprom_field.o eeprom/eeprom_layout.o
|
|
endif
|
|
|
|
obj-y += cli.o
|
|
obj-$(CONFIG_FSL_DDR_INTERACTIVE) += cli_simple.o cli_readline.o
|
|
obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += cli_simple.o cli_readline.o
|
|
obj-$(CONFIG_DFU_OVER_USB) += dfu.o
|
|
obj-y += command.o
|
|
obj-$(CONFIG_$(SPL_TPL_)LOG) += log.o
|
|
obj-$(CONFIG_$(SPL_TPL_)LOG_CONSOLE) += log_console.o
|
|
obj-$(CONFIG_$(SPL_TPL_)LOG_SYSLOG) += log_syslog.o
|
|
obj-y += s_record.o
|
|
obj-$(CONFIG_CMD_LOADB) += xyzModem.o
|
|
obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += xyzModem.o
|
|
|
|
obj-$(CONFIG_$(SPL_TPL_)AVB_VERIFY) += avb_verify.o
|
|
obj-$(CONFIG_$(SPL_TPL_)STACKPROTECTOR) += stackprot.o
|
|
obj-$(CONFIG_SCP03) += scp03.o
|
|
|
|
obj-$(CONFIG_QFW) += qfw.o
|