mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
39dca76c34
Due to an upstream change, the ls1028a.dtsi bindings for the mscc_felix
switch got accepted with all ports disabled by default and with no link
to the DSA master - this needs to be done on a per board basis.
Note that enetc-2 is not currently disabled in the ls1028a.dtsi, but
presumably at some point it might become. Explicitly enable it in the
QDS device trees anyway, to proactively avoid issues when that happens.
Fixes: a7fdac7e2a ("arm: dts: ls1028a: define QDS networking protocol combinations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
58 lines
1.2 KiB
Text
58 lines
1.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* NXP LS1028A-QDS device tree fragment for RCW 7777
|
|
*
|
|
* Copyright 2019-2021 NXP Semiconductors
|
|
*/
|
|
|
|
/*
|
|
* This setup is using a SCH-30841 card with AQR412 10G quad PHY.
|
|
*
|
|
* Switch ports are mapped 1:1 to AQR412 card ports seated in slot 1.
|
|
* Bottom port is port 0.
|
|
* Note that this is only usable for:
|
|
* - QDS boards WITHOUT lane B rework,
|
|
* - AQR412 card WITHOUT lane A -> lane C rework
|
|
*
|
|
* The following DTS assumes DIP SW5[1-3] = 000b.
|
|
*/
|
|
&slot1 {
|
|
#include "fsl-sch-30841.dtsi"
|
|
};
|
|
|
|
&enetc2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mscc_felix {
|
|
status = "okay";
|
|
};
|
|
|
|
&mscc_felix_port0 {
|
|
status = "okay";
|
|
phy-mode = "sgmii-2500";
|
|
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>;
|
|
};
|
|
|
|
&mscc_felix_port1 {
|
|
status = "okay";
|
|
phy-mode = "sgmii-2500";
|
|
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>;
|
|
};
|
|
|
|
&mscc_felix_port2 {
|
|
status = "okay";
|
|
phy-mode = "sgmii-2500";
|
|
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
|
|
};
|
|
|
|
&mscc_felix_port3 {
|
|
status = "okay";
|
|
phy-mode = "sgmii-2500";
|
|
phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
|
|
};
|
|
|
|
&mscc_felix_port4 {
|
|
ethernet = <&enetc2>;
|
|
status = "okay";
|
|
};
|