mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
e210ec0181
Import updated device trees from Linux tag v5.9. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream. A couple of headers needed updates for recently-added hardware support. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
429 lines
8.1 KiB
Text
429 lines
8.1 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
|
|
// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
|
|
// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
|
|
|
|
#include "sun50i-a64.dtsi"
|
|
#include "sun50i-a64-cpu-opp.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
|
|
enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
|
|
/* Backlight configuration differs per PinePhone revision. */
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
blue {
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
|
|
};
|
|
|
|
green {
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
|
|
};
|
|
|
|
red {
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
|
|
};
|
|
};
|
|
|
|
speaker_amp: audio-amplifier {
|
|
compatible = "simple-audio-amplifier";
|
|
enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
|
|
sound-name-prefix = "Speaker Amp";
|
|
};
|
|
|
|
vibrator {
|
|
compatible = "gpio-vibrator";
|
|
enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
|
|
vcc-supply = <®_dcdc1>;
|
|
};
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec_analog {
|
|
cpvdd-supply = <®_eldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&dai {
|
|
status = "okay";
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&dphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi {
|
|
vcc-dsi-supply = <®_dldo1>;
|
|
status = "okay";
|
|
|
|
panel@0 {
|
|
compatible = "xingbangda,xbd599";
|
|
reg = <0>;
|
|
reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
|
|
iovcc-supply = <®_dldo2>;
|
|
vcc-supply = <®_ldo_io0>;
|
|
backlight = <&backlight>;
|
|
};
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
touchscreen@5d {
|
|
compatible = "goodix,gt917s";
|
|
reg = <0x5d>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
|
|
irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
|
|
reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
|
|
AVDD28-supply = <®_ldo_io0>;
|
|
VDDIO-supply = <®_ldo_io0>;
|
|
touchscreen-size-x = <720>;
|
|
touchscreen-size-y = <1440>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
/* Magnetometer */
|
|
lis3mdl: lis3mdl@1e {
|
|
compatible = "st,lis3mdl-magn";
|
|
reg = <0x1e>;
|
|
vdd-supply = <®_dldo1>;
|
|
vddio-supply = <®_dldo1>;
|
|
};
|
|
|
|
/* Accelerometer/gyroscope */
|
|
mpu6050@68 {
|
|
compatible = "invensense,mpu6050";
|
|
reg = <0x68>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
|
|
vdd-supply = <®_dldo1>;
|
|
vddio-supply = <®_dldo1>;
|
|
};
|
|
};
|
|
|
|
/* Connected to pogo pins (external spring based pinheader for user addons) */
|
|
&i2c2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&lradc {
|
|
vref-supply = <®_aldo3>;
|
|
status = "okay";
|
|
|
|
button-200 {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
channel = <0>;
|
|
voltage = <200000>;
|
|
};
|
|
|
|
button-400 {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
channel = <0>;
|
|
voltage = <400000>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
vqmmc-supply = <®_dcdc1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
|
disable-wp;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
vqmmc-supply = <®_dcdc1>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
vcc-pb-supply = <®_dcdc1>;
|
|
vcc-pc-supply = <®_dcdc1>;
|
|
vcc-pd-supply = <®_dcdc1>;
|
|
vcc-pe-supply = <®_aldo1>;
|
|
vcc-pf-supply = <®_dcdc1>;
|
|
vcc-pg-supply = <®_dldo4>;
|
|
vcc-ph-supply = <®_dcdc1>;
|
|
};
|
|
|
|
&r_pio {
|
|
/*
|
|
* FIXME: We can't add that supply for now since it would
|
|
* create a circular dependency between pinctrl, the regulator
|
|
* and the RSB Bus.
|
|
*
|
|
* vcc-pl-supply = <®_aldo2>;
|
|
*/
|
|
};
|
|
|
|
&r_pwm {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp803: pmic@3a3 {
|
|
compatible = "x-powers,axp803";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
#include "axp803.dtsi"
|
|
|
|
&ac_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&battery_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
®_aldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "dovdd-csi";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pll-avcc";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-cpux";
|
|
};
|
|
|
|
/* DCDC3 is polyphased with DCDC2 */
|
|
|
|
®_dcdc5 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dcdc6 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-dsi-sensor";
|
|
};
|
|
|
|
®_dldo2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-mipi-io";
|
|
};
|
|
|
|
®_dldo3 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "avdd-csi";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-wifi-io";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-lpddr";
|
|
};
|
|
|
|
®_eldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "dvdd-1v8-csi";
|
|
};
|
|
|
|
®_fldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-1v2-hsic";
|
|
};
|
|
|
|
®_fldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_ldo_io0 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-lcd-ctp-stk";
|
|
status = "okay";
|
|
};
|
|
|
|
®_ldo_io1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-1v8-typec";
|
|
status = "okay";
|
|
};
|
|
|
|
®_rtc_ldo {
|
|
regulator-name = "vcc-rtc";
|
|
};
|
|
|
|
&sound {
|
|
status = "okay";
|
|
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
|
|
simple-audio-card,widgets = "Microphone", "Headset Microphone",
|
|
"Microphone", "Internal Microphone",
|
|
"Headphone", "Headphone Jack",
|
|
"Speaker", "Internal Earpiece",
|
|
"Speaker", "Internal Speaker";
|
|
simple-audio-card,routing =
|
|
"Headphone Jack", "HP",
|
|
"Internal Earpiece", "EARPIECE",
|
|
"Internal Speaker", "Speaker Amp OUTL",
|
|
"Internal Speaker", "Speaker Amp OUTR",
|
|
"Speaker Amp INL", "LINEOUT",
|
|
"Speaker Amp INR", "LINEOUT",
|
|
"Left DAC", "AIF1 Slot 0 Left",
|
|
"Right DAC", "AIF1 Slot 0 Right",
|
|
"AIF1 Slot 0 Left ADC", "Left ADC",
|
|
"AIF1 Slot 0 Right ADC", "Right ADC",
|
|
"Internal Microphone", "MBIAS",
|
|
"MIC1", "Internal Microphone",
|
|
"Headset Microphone", "HBIAS",
|
|
"MIC2", "Headset Microphone";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Connected to the modem (hardware flow control can't be used) */
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|