u-boot/configs/cm_fx6_defconfig
Suniel Mahesh 1699f0e592 arm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix SPL build errors
Enable driver model for SPI and SPI_FLASH to remove the following
compile warning on CM-FX6 SOM:
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
====================================================

This change introduced SPL build error as shown:

In file included from include/common.h:47:0,
                 from drivers/mtd/spi/sf_probe.c:10:
drivers/mtd/spi/sf_probe.c: In function 'spi_flash_std_probe':
drivers/mtd/spi/sf_probe.c:149:54: error: dereferencing pointer to incomplete type 'struct dm_spi_slave_platdata'
scripts/Makefile.build:278: recipe for target 'spl/drivers/mtd/spi/sf_probe.o' failed
make[3]: *** [spl/drivers/mtd/spi/sf_probe.o] Error 1
scripts/Makefile.build:432: recipe for target 'spl/drivers/mtd/spi' failed
make[2]: *** [spl/drivers/mtd/spi] Error 2

Disabling DM for SPI support(SPI and SF) in SPL resolves the issue.
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2020-01-07 10:26:56 +01:00

97 lines
2.4 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_TARGET_CM_FX6=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xC0000
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL=y
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
# CONFIG_CMD_BMODE is not set
CONFIG_AHCI=y
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run legacy_bootcmd"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="usb start;sf probe"
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SYS_PROMPT="CM-FX6 # "
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_EEPROM_LAYOUT=y
CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3"
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SATA=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi0.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:768k(uboot),256k(uboot-environment),-(reserved)"
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-cm-fx6"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_DWC_AHSATA=y
# CONFIG_DWC_AHSATA_AHCI is not set
CONFIG_DM_KEYBOARD=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_MXS=y
CONFIG_SPI_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_DM_PMIC=y
CONFIG_DM_REGULATOR=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_ETH=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
CONFIG_DM_VIDEO=y
CONFIG_FDT_FIXUP_PARTITIONS=y