mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
165e8fe5db
The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs. As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for DDR, PER, and CORE PLLs. Calculating the required values and setting the registers accordingly was taken from the set_mpu_spreadspectrum routine contained in the arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project. In locked condition, DPLL output clock = CLKINP *[M/N]. In case of SSC enabled, the reference manual explains that there is a restriction of range of M values. Since the clk_ti_am3_dpll_round_rate() attempts to select the minimum possible N, the value of M obtained is not guaranteed to be within the range required. With the new "ti,min-div" parameter it is possible to increase N and consequently M to satisfy the constraint imposed by SSC. Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it Signed-off-by: Dario Binacchi <dariobin@libero.it>
413 lines
10 KiB
C
413 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* TI DPLL clock support
|
|
*
|
|
* Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
|
|
*
|
|
* Loosely based on Linux kernel drivers/clk/ti/dpll.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <clk-uclass.h>
|
|
#include <div64.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <hang.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include "clk.h"
|
|
|
|
struct clk_ti_am3_dpll_drv_data {
|
|
ulong max_rate;
|
|
};
|
|
|
|
struct clk_ti_am3_dpll_priv {
|
|
struct clk_ti_reg clkmode_reg;
|
|
struct clk_ti_reg idlest_reg;
|
|
struct clk_ti_reg clksel_reg;
|
|
struct clk_ti_reg ssc_deltam_reg;
|
|
struct clk_ti_reg ssc_modfreq_reg;
|
|
struct clk clk_bypass;
|
|
struct clk clk_ref;
|
|
u16 last_rounded_mult;
|
|
u8 last_rounded_div;
|
|
u8 min_div;
|
|
ulong max_rate;
|
|
u32 ssc_modfreq;
|
|
u32 ssc_deltam;
|
|
bool ssc_downspread;
|
|
};
|
|
|
|
static ulong clk_ti_am3_dpll_round_rate(struct clk *clk, ulong rate)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
|
|
ulong ret, ref_rate, r;
|
|
int m, d, err_min, err;
|
|
int mult = INT_MAX, div = INT_MAX;
|
|
|
|
if (priv->max_rate && rate > priv->max_rate) {
|
|
dev_warn(clk->dev, "%ld is to high a rate, lowered to %ld\n",
|
|
rate, priv->max_rate);
|
|
rate = priv->max_rate;
|
|
}
|
|
|
|
ret = -EFAULT;
|
|
err = rate;
|
|
err_min = rate;
|
|
ref_rate = clk_get_rate(&priv->clk_ref);
|
|
for (d = priv->min_div; err_min && d <= 128; d++) {
|
|
for (m = 2; m <= 2047; m++) {
|
|
r = (ref_rate * m) / d;
|
|
err = abs(r - rate);
|
|
if (err < err_min) {
|
|
err_min = err;
|
|
ret = r;
|
|
mult = m;
|
|
div = d;
|
|
|
|
if (err == 0)
|
|
break;
|
|
} else if (r > rate) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
priv->last_rounded_mult = mult;
|
|
priv->last_rounded_div = div;
|
|
dev_dbg(clk->dev, "rate=%ld, min-div: %d, best_rate=%ld, mult=%d, div=%d\n",
|
|
rate, priv->min_div, ret, mult, div);
|
|
return ret;
|
|
}
|
|
|
|
static void clk_ti_am3_dpll_clken(struct clk_ti_am3_dpll_priv *priv,
|
|
u8 clken_bits)
|
|
{
|
|
u32 v;
|
|
|
|
v = clk_ti_readl(&priv->clkmode_reg);
|
|
v &= ~CM_CLKMODE_DPLL_DPLL_EN_MASK;
|
|
v |= clken_bits << CM_CLKMODE_DPLL_EN_SHIFT;
|
|
clk_ti_writel(v, &priv->clkmode_reg);
|
|
}
|
|
|
|
static int clk_ti_am3_dpll_state(struct clk *clk, u8 state)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
|
|
u32 i = 0, v;
|
|
|
|
do {
|
|
v = clk_ti_readl(&priv->idlest_reg) & ST_DPLL_CLK_MASK;
|
|
if (v == state) {
|
|
dev_dbg(clk->dev, "transition to '%s' in %d loops\n",
|
|
state ? "locked" : "bypassed", i);
|
|
return 1;
|
|
}
|
|
|
|
} while (++i < LDELAY);
|
|
|
|
dev_err(clk->dev, "failed transition to '%s'\n",
|
|
state ? "locked" : "bypassed");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clk_ti_am3_dpll_ssc_program - set spread-spectrum clocking registers
|
|
* @clk: struct clk * of DPLL to set
|
|
*
|
|
* Enable the DPLL spread spectrum clocking if frequency modulation and
|
|
* frequency spreading have been set, otherwise disable it.
|
|
*/
|
|
static void clk_ti_am3_dpll_ssc_program(struct clk *clk)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
|
|
unsigned long ref_rate;
|
|
u32 v, ctrl, mod_freq_divider, exponent, mantissa;
|
|
u32 deltam_step, deltam_ceil;
|
|
|
|
ctrl = clk_ti_readl(&priv->clkmode_reg);
|
|
|
|
if (priv->ssc_modfreq && priv->ssc_deltam) {
|
|
ctrl |= CM_CLKMODE_DPLL_SSC_EN_MASK;
|
|
|
|
if (priv->ssc_downspread)
|
|
ctrl |= CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK;
|
|
else
|
|
ctrl &= ~CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK;
|
|
|
|
ref_rate = clk_get_rate(&priv->clk_ref);
|
|
mod_freq_divider =
|
|
(ref_rate / priv->last_rounded_div) / (4 * priv->ssc_modfreq);
|
|
if (priv->ssc_modfreq > (ref_rate / 70))
|
|
dev_warn(clk->dev,
|
|
"clock: SSC modulation frequency of DPLL %s greater than %ld\n",
|
|
clk->dev->name, ref_rate / 70);
|
|
|
|
exponent = 0;
|
|
mantissa = mod_freq_divider;
|
|
while ((mantissa > 127) && (exponent < 7)) {
|
|
exponent++;
|
|
mantissa /= 2;
|
|
}
|
|
if (mantissa > 127)
|
|
mantissa = 127;
|
|
|
|
v = clk_ti_readl(&priv->ssc_modfreq_reg);
|
|
v &= ~(CM_SSC_MODFREQ_DPLL_MANT_MASK | CM_SSC_MODFREQ_DPLL_EXP_MASK);
|
|
v |= mantissa << __ffs(CM_SSC_MODFREQ_DPLL_MANT_MASK);
|
|
v |= exponent << __ffs(CM_SSC_MODFREQ_DPLL_EXP_MASK);
|
|
clk_ti_writel(v, &priv->ssc_modfreq_reg);
|
|
dev_dbg(clk->dev,
|
|
"mod_freq_divider: %u, exponent: %u, mantissa: %u, modfreq_reg: 0x%x\n",
|
|
mod_freq_divider, exponent, mantissa, v);
|
|
|
|
deltam_step = priv->last_rounded_mult * priv->ssc_deltam;
|
|
deltam_step /= 10;
|
|
if (priv->ssc_downspread)
|
|
deltam_step /= 2;
|
|
|
|
deltam_step <<= __ffs(CM_SSC_DELTAM_DPLL_INT_MASK);
|
|
deltam_step /= 100;
|
|
deltam_step /= mod_freq_divider;
|
|
if (deltam_step > 0xFFFFF)
|
|
deltam_step = 0xFFFFF;
|
|
|
|
deltam_ceil = (deltam_step & CM_SSC_DELTAM_DPLL_INT_MASK) >>
|
|
__ffs(CM_SSC_DELTAM_DPLL_INT_MASK);
|
|
if (deltam_step & CM_SSC_DELTAM_DPLL_FRAC_MASK)
|
|
deltam_ceil++;
|
|
|
|
if ((priv->ssc_downspread &&
|
|
((priv->last_rounded_mult - (2 * deltam_ceil)) < 20 ||
|
|
priv->last_rounded_mult > 2045)) ||
|
|
((priv->last_rounded_mult - deltam_ceil) < 20 ||
|
|
(priv->last_rounded_mult + deltam_ceil) > 2045))
|
|
dev_warn(clk->dev,
|
|
"clock: SSC multiplier of DPLL %s is out of range\n",
|
|
clk->dev->name);
|
|
|
|
v = clk_ti_readl(&priv->ssc_deltam_reg);
|
|
v &= ~(CM_SSC_DELTAM_DPLL_INT_MASK | CM_SSC_DELTAM_DPLL_FRAC_MASK);
|
|
v |= deltam_step << __ffs(CM_SSC_DELTAM_DPLL_INT_MASK |
|
|
CM_SSC_DELTAM_DPLL_FRAC_MASK);
|
|
clk_ti_writel(v, &priv->ssc_deltam_reg);
|
|
dev_dbg(clk->dev,
|
|
"deltam_step: %u, deltam_ceil: %u, deltam_reg: 0x%x\n",
|
|
deltam_step, deltam_ceil, v);
|
|
} else {
|
|
ctrl &= ~CM_CLKMODE_DPLL_SSC_EN_MASK;
|
|
}
|
|
|
|
clk_ti_writel(ctrl, &priv->clkmode_reg);
|
|
}
|
|
|
|
static ulong clk_ti_am3_dpll_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
|
|
u32 v;
|
|
ulong round_rate;
|
|
|
|
round_rate = clk_ti_am3_dpll_round_rate(clk, rate);
|
|
if (IS_ERR_VALUE(round_rate))
|
|
return round_rate;
|
|
|
|
v = clk_ti_readl(&priv->clksel_reg);
|
|
|
|
/* enter bypass mode */
|
|
clk_ti_am3_dpll_clken(priv, DPLL_EN_MN_BYPASS);
|
|
|
|
/* wait for bypass mode */
|
|
clk_ti_am3_dpll_state(clk, 0);
|
|
|
|
/* set M & N */
|
|
v &= ~CM_CLKSEL_DPLL_M_MASK;
|
|
v |= (priv->last_rounded_mult << CM_CLKSEL_DPLL_M_SHIFT) &
|
|
CM_CLKSEL_DPLL_M_MASK;
|
|
|
|
v &= ~CM_CLKSEL_DPLL_N_MASK;
|
|
v |= ((priv->last_rounded_div - 1) << CM_CLKSEL_DPLL_N_SHIFT) &
|
|
CM_CLKSEL_DPLL_N_MASK;
|
|
|
|
clk_ti_writel(v, &priv->clksel_reg);
|
|
|
|
clk_ti_am3_dpll_ssc_program(clk);
|
|
|
|
/* lock dpll */
|
|
clk_ti_am3_dpll_clken(priv, DPLL_EN_LOCK);
|
|
|
|
/* wait till the dpll locks */
|
|
if (!clk_ti_am3_dpll_state(clk, ST_DPLL_CLK_MASK))
|
|
hang();
|
|
|
|
return round_rate;
|
|
}
|
|
|
|
static ulong clk_ti_am3_dpll_get_rate(struct clk *clk)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
|
|
u64 rate;
|
|
u32 m, n, v;
|
|
|
|
/* Return bypass rate if DPLL is bypassed */
|
|
v = clk_ti_readl(&priv->clkmode_reg);
|
|
v &= CM_CLKMODE_DPLL_EN_MASK;
|
|
v >>= CM_CLKMODE_DPLL_EN_SHIFT;
|
|
|
|
switch (v) {
|
|
case DPLL_EN_MN_BYPASS:
|
|
case DPLL_EN_LOW_POWER_BYPASS:
|
|
case DPLL_EN_FAST_RELOCK_BYPASS:
|
|
rate = clk_get_rate(&priv->clk_bypass);
|
|
dev_dbg(clk->dev, "rate=%lld\n", rate);
|
|
return rate;
|
|
}
|
|
|
|
v = clk_ti_readl(&priv->clksel_reg);
|
|
m = v & CM_CLKSEL_DPLL_M_MASK;
|
|
m >>= CM_CLKSEL_DPLL_M_SHIFT;
|
|
n = v & CM_CLKSEL_DPLL_N_MASK;
|
|
n >>= CM_CLKSEL_DPLL_N_SHIFT;
|
|
|
|
rate = clk_get_rate(&priv->clk_ref) * m;
|
|
do_div(rate, n + 1);
|
|
dev_dbg(clk->dev, "rate=%lld\n", rate);
|
|
return rate;
|
|
}
|
|
|
|
const struct clk_ops clk_ti_am3_dpll_ops = {
|
|
.round_rate = clk_ti_am3_dpll_round_rate,
|
|
.get_rate = clk_ti_am3_dpll_get_rate,
|
|
.set_rate = clk_ti_am3_dpll_set_rate,
|
|
};
|
|
|
|
static int clk_ti_am3_dpll_remove(struct udevice *dev)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
|
|
int err;
|
|
|
|
err = clk_release_all(&priv->clk_bypass, 1);
|
|
if (err) {
|
|
dev_err(dev, "failed to release bypass clock\n");
|
|
return err;
|
|
}
|
|
|
|
err = clk_release_all(&priv->clk_ref, 1);
|
|
if (err) {
|
|
dev_err(dev, "failed to release reference clock\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int clk_ti_am3_dpll_probe(struct udevice *dev)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
|
|
int err;
|
|
|
|
err = clk_get_by_index(dev, 0, &priv->clk_ref);
|
|
if (err) {
|
|
dev_err(dev, "failed to get reference clock\n");
|
|
return err;
|
|
}
|
|
|
|
err = clk_get_by_index(dev, 1, &priv->clk_bypass);
|
|
if (err) {
|
|
dev_err(dev, "failed to get bypass clock\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int clk_ti_am3_dpll_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
|
|
struct clk_ti_am3_dpll_drv_data *data =
|
|
(struct clk_ti_am3_dpll_drv_data *)dev_get_driver_data(dev);
|
|
u32 min_div;
|
|
int err;
|
|
|
|
priv->max_rate = data->max_rate;
|
|
|
|
err = clk_ti_get_reg_addr(dev, 0, &priv->clkmode_reg);
|
|
if (err) {
|
|
dev_err(dev, "failed to get clkmode register address\n");
|
|
return err;
|
|
}
|
|
|
|
err = clk_ti_get_reg_addr(dev, 1, &priv->idlest_reg);
|
|
if (err) {
|
|
dev_err(dev, "failed to get idlest register\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = clk_ti_get_reg_addr(dev, 2, &priv->clksel_reg);
|
|
if (err) {
|
|
dev_err(dev, "failed to get clksel register\n");
|
|
return err;
|
|
}
|
|
|
|
err = clk_ti_get_reg_addr(dev, 3, &priv->ssc_deltam_reg);
|
|
if (err) {
|
|
dev_err(dev, "failed to get SSC deltam register\n");
|
|
return err;
|
|
}
|
|
|
|
err = clk_ti_get_reg_addr(dev, 4, &priv->ssc_modfreq_reg);
|
|
if (err) {
|
|
dev_err(dev, "failed to get SSC modfreq register\n");
|
|
return err;
|
|
}
|
|
|
|
if (dev_read_u32(dev, "ti,ssc-modfreq-hz", &priv->ssc_modfreq))
|
|
priv->ssc_modfreq = 0;
|
|
|
|
if (dev_read_u32(dev, "ti,ssc-deltam", &priv->ssc_deltam))
|
|
priv->ssc_deltam = 0;
|
|
|
|
priv->ssc_downspread = dev_read_bool(dev, "ti,ssc-downspread");
|
|
|
|
if (dev_read_u32(dev, "ti,min-div", &min_div) || min_div == 0 ||
|
|
min_div > 128)
|
|
priv->min_div = 1;
|
|
else
|
|
priv->min_div = min_div;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ti_am3_dpll_drv_data dpll_no_gate_data = {
|
|
.max_rate = 1000000000
|
|
};
|
|
|
|
static const struct clk_ti_am3_dpll_drv_data dpll_no_gate_j_type_data = {
|
|
.max_rate = 2000000000
|
|
};
|
|
|
|
static const struct clk_ti_am3_dpll_drv_data dpll_core_data = {
|
|
.max_rate = 1000000000
|
|
};
|
|
|
|
static const struct udevice_id clk_ti_am3_dpll_of_match[] = {
|
|
{.compatible = "ti,am3-dpll-core-clock",
|
|
.data = (ulong)&dpll_core_data},
|
|
{.compatible = "ti,am3-dpll-no-gate-clock",
|
|
.data = (ulong)&dpll_no_gate_data},
|
|
{.compatible = "ti,am3-dpll-no-gate-j-type-clock",
|
|
.data = (ulong)&dpll_no_gate_j_type_data},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(clk_ti_am3_dpll) = {
|
|
.name = "ti_am3_dpll_clock",
|
|
.id = UCLASS_CLK,
|
|
.of_match = clk_ti_am3_dpll_of_match,
|
|
.of_to_plat = clk_ti_am3_dpll_of_to_plat,
|
|
.probe = clk_ti_am3_dpll_probe,
|
|
.remove = clk_ti_am3_dpll_remove,
|
|
.priv_auto = sizeof(struct clk_ti_am3_dpll_priv),
|
|
.ops = &clk_ti_am3_dpll_ops,
|
|
};
|