u-boot/arch/arm/mach-rockchip/rk322x-board-spl.c
David Wu 424324d3ca rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver
Clean the iomux definitions at grf_rk322x.h, and move them into
pinctrl-driver for resolving the compiling error of redefinition.
After that, define the uart2 iomux at rk322x-board file.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28 17:12:38 +01:00

101 lines
2.2 KiB
C

/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <debug_uart.h>
#include <dm.h>
#include <ram.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/bootrom.h>
#include <asm/arch/cru_rk322x.h>
#include <asm/arch/grf_rk322x.h>
#include <asm/arch/hardware.h>
#include <asm/arch/timer.h>
#include <asm/arch/uart.h>
u32 spl_boot_device(void)
{
return BOOT_DEVICE_MMC1;
}
DECLARE_GLOBAL_DATA_PTR;
#define GRF_BASE 0x11000000
#define SGRF_BASE 0x10140000
#define DEBUG_UART_BASE 0x11030000
void board_debug_uart_init(void)
{
static struct rk322x_grf * const grf = (void *)GRF_BASE;
enum {
GPIO1B2_SHIFT = 4,
GPIO1B2_MASK = 3 << GPIO1B2_SHIFT,
GPIO1B2_GPIO = 0,
GPIO1B2_UART1_SIN,
GPIO1B2_UART21_SIN,
GPIO1B1_SHIFT = 2,
GPIO1B1_MASK = 3 << GPIO1B1_SHIFT,
GPIO1B1_GPIO = 0,
GPIO1B1_UART1_SOUT,
GPIO1B1_UART21_SOUT,
};
enum {
CON_IOMUX_UART2SEL_SHIFT= 8,
CON_IOMUX_UART2SEL_MASK = 1 << CON_IOMUX_UART2SEL_SHIFT,
CON_IOMUX_UART2SEL_2 = 0,
CON_IOMUX_UART2SEL_21,
};
/* Enable early UART2 channel 1 on the RK322x */
rk_clrsetreg(&grf->gpio1b_iomux,
GPIO1B1_MASK | GPIO1B2_MASK,
GPIO1B2_UART21_SIN << GPIO1B2_SHIFT |
GPIO1B1_UART21_SOUT << GPIO1B1_SHIFT);
/* Set channel C as UART2 input */
rk_clrsetreg(&grf->con_iomux,
CON_IOMUX_UART2SEL_MASK,
CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT);
}
#define SGRF_DDR_CON0 0x10150000
void board_init_f(ulong dummy)
{
struct udevice *dev;
int ret;
/*
* Debug UART can be used from here if required:
*
* debug_uart_init();
* printch('a');
* printhex8(0x1234);
* printascii("string");
*/
debug_uart_init();
printascii("SPL Init");
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
hang();
}
rockchip_timer_init();
printf("timer init done\n");
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret) {
printf("DRAM init failed: %d\n", ret);
return;
}
/* Disable the ddr secure region setting to make it non-secure */
rk_clrreg(SGRF_DDR_CON0, 0x4000);
#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
#endif
}