u-boot/include/configs/rpi.h
Simon Glass 80168d5a28 Correct SPL uses of CMD_MMC
This converts 6 usages of this option to the non-SPL form, since there is
no SPL_CMD_MMC defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09 16:32:26 -05:00

168 lines
5 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* (C) Copyright 2012-2016 Stephen Warren
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <linux/sizes.h>
#include <asm/arch/timer.h>
#ifndef __ASSEMBLY__
#include <asm/arch/base.h>
#endif
/* Architecture, CPU, etc.*/
/* Use SoC timer for AArch32, but architected timer for AArch64 */
#ifndef CONFIG_ARM64
#define CFG_SYS_TIMER_RATE 1000000
#define CFG_SYS_TIMER_COUNTER \
(&((struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR)->clo)
#endif
/* Memory layout */
#define CFG_SYS_SDRAM_BASE 0x00000000
#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/*
* The board really has 256M. However, the VC (VideoCore co-processor) shares
* the RAM, and uses a configurable portion at the top. We tell U-Boot that a
* smaller amount of RAM is present in order to avoid stomping on the area
* the VC uses.
*/
#define CFG_SYS_SDRAM_SIZE SZ_128M
/* Devices */
/* LCD */
/* DFU over USB/UDC */
#ifdef CONFIG_CMD_DFU
#ifdef CONFIG_ARM64
#define KERNEL_FILENAME "Image"
#else
#define KERNEL_FILENAME "zImage"
#endif
#define ENV_DFU_SETTINGS \
"dfu_alt_info=u-boot.bin fat 0 1;uboot.env fat 0 1;" \
"config.txt fat 0 1;" \
KERNEL_FILENAME " fat 0 1\0"
#else
#define ENV_DFU_SETTINGS ""
#endif
/* Console configuration */
/* Environment */
/* Shell */
/* Environment */
#define ENV_DEVICE_SETTINGS \
"stdin=serial,usbkbd\0" \
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
#ifdef CONFIG_ARM64
#define FDT_HIGH "ffffffffffffffff"
#define INITRD_HIGH "ffffffffffffffff"
#else
#define FDT_HIGH "ffffffff"
#define INITRD_HIGH "ffffffff"
#endif
/*
* Memory layout for where various images get loaded by boot scripts:
*
* I suspect address 0 is used as the SMP pen on the RPi2, so avoid this.
*
* Older versions of the boot firmware place the firmware-loaded DTB at 0x100,
* newer versions place it in high memory. So prevent U-Boot from doing its own
* DTB + initrd relocation so that we won't accidentally relocate the initrd
* over the firmware-loaded DTB and generally try to lay out things starting
* from the bottom of RAM.
*
* kernel_addr_r has different constraints on ARM and Aarch64. For 32-bit ARM,
* it must be within the first 128M of RAM in order for the kernel's
* CONFIG_AUTO_ZRELADDR option to work. The kernel itself will be decompressed
* to 0x8000 but the decompressor clobbers 0x4000-0x8000 as well. The
* decompressor also likes to relocate itself to right past the end of the
* decompressed kernel, so in total the sum of the compressed and and
* decompressed kernel needs to be reserved.
*
* For Aarch64, the kernel image is uncompressed and must be loaded at
* text_offset bytes (specified in the header of the Image) into a 2MB
* boundary. The 'booti' command relocates the image if necessary. Linux uses
* a default text_offset of 0x80000. In summary, loading at 0x80000
* satisfies all these constraints and reserving memory up to 0x02400000
* permits fairly large (roughly 36M) kernels.
*
* scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't
* conflict with something else. Reserving 1M for each of them at
* 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty.
*
* On ARM, both the DTB and any possible initrd must be loaded such that they
* fit inside the lowmem mapping in Linux. In practice, this usually means not
* more than ~700M away from the start of the kernel image but this number can
* be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line
* parameter given to the kernel. So reserving memory from low to high
* satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for
* the DTB leaves rest of the free RAM to the initrd starting at 0x02700000.
* Even with the smallest possible CPU-GPU memory split of the CPU getting
* only 64M, the remaining 25M starting at 0x02700000 should allow quite
* large initrds before they start colliding with U-Boot.
*/
#define ENV_MEM_LAYOUT_SETTINGS \
"fdt_high=" FDT_HIGH "\0" \
"initrd_high=" INITRD_HIGH "\0" \
"kernel_addr_r=0x00080000\0" \
"scriptaddr=0x02400000\0" \
"pxefile_addr_r=0x02500000\0" \
"fdt_addr_r=0x02600000\0" \
"ramdisk_addr_r=0x02700000\0"
#if IS_ENABLED(CONFIG_CMD_MMC)
#define BOOT_TARGET_MMC(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2)
#else
#define BOOT_TARGET_MMC(func)
#endif
#if CONFIG_IS_ENABLED(CMD_USB)
#define BOOT_TARGET_USB(func) func(USB, usb, 0)
#else
#define BOOT_TARGET_USB(func)
#endif
#if CONFIG_IS_ENABLED(CMD_PXE)
#define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
#else
#define BOOT_TARGET_PXE(func)
#endif
#if CONFIG_IS_ENABLED(CMD_DHCP)
#define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
#else
#define BOOT_TARGET_DHCP(func)
#endif
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_MMC(func) \
BOOT_TARGET_USB(func) \
BOOT_TARGET_PXE(func) \
BOOT_TARGET_DHCP(func)
#include <config_distro_bootcmd.h>
#define CFG_EXTRA_ENV_SETTINGS \
"dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \
ENV_DEVICE_SETTINGS \
ENV_DFU_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#endif