mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
ea4299a213
Now that Linux has accepted these tags, move U-Boot over to use them. Tidy up the comments and formatting, making sure that VPL is mentioned too. Signed-off-by: Simon Glass <sjg@chromium.org>
172 lines
5.9 KiB
ReStructuredText
172 lines
5.9 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
PCI with Driver Model
|
|
=====================
|
|
|
|
How busses are scanned
|
|
----------------------
|
|
|
|
Any config read will end up at pci_read_config(). This uses
|
|
uclass_get_device_by_seq() to get the PCI bus for a particular bus number.
|
|
Bus number 0 will need to be requested first, and the alias in the device
|
|
tree file will point to the correct device::
|
|
|
|
aliases {
|
|
pci0 = &pcic;
|
|
};
|
|
|
|
pcic: pci@0 {
|
|
compatible = "sandbox,pci";
|
|
...
|
|
};
|
|
|
|
|
|
If there is no alias the devices will be numbered sequentially in the device
|
|
tree.
|
|
|
|
The call to uclass_get_device() will cause the PCI bus to be probed.
|
|
This does a scan of the bus to locate available devices. These devices are
|
|
bound to their appropriate driver if available. If there is no driver, then
|
|
they are bound to a generic PCI driver which does nothing.
|
|
|
|
After probing a bus, the available devices will appear in the device tree
|
|
under that bus.
|
|
|
|
Note that this is all done on a lazy basis, as needed, so until something is
|
|
touched on PCI (eg: a call to pci_find_devices()) it will not be probed.
|
|
|
|
PCI devices can appear in the flattened device tree. If they do, their node
|
|
often contains extra information which cannot be derived from the PCI IDs or
|
|
PCI class of the device. Each PCI device node must have a <reg> property, as
|
|
defined by the IEEE Std 1275-1994 PCI bus binding document v2.1. Compatible
|
|
string list is optional and generally not needed, since PCI is discoverable
|
|
bus, albeit there are justified exceptions. If the compatible string is
|
|
present, matching on it takes precedence over PCI IDs and PCI classes.
|
|
|
|
Note we must describe PCI devices with the same bus hierarchy as the
|
|
hardware, otherwise driver model cannot detect the correct parent/children
|
|
relationship during PCI bus enumeration thus PCI devices won't be bound to
|
|
their drivers accordingly. A working example like below::
|
|
|
|
pci {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
compatible = "pci-x86";
|
|
bootph-all;
|
|
ranges = <0x02000000 0x0 0x40000000 0x40000000 0 0x80000000
|
|
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
|
|
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
|
|
|
|
pcie@17,0 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
compatible = "pci-bridge";
|
|
bootph-all;
|
|
reg = <0x0000b800 0x0 0x0 0x0 0x0>;
|
|
|
|
topcliff@0,0 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
compatible = "pci-bridge";
|
|
bootph-all;
|
|
reg = <0x00010000 0x0 0x0 0x0 0x0>;
|
|
|
|
pciuart0: uart@a,1 {
|
|
compatible = "pci8086,8811.00",
|
|
"pci8086,8811",
|
|
"pciclass,070002",
|
|
"pciclass,0700",
|
|
"x86-uart";
|
|
bootph-all;
|
|
reg = <0x00025100 0x0 0x0 0x0 0x0
|
|
0x01025110 0x0 0x0 0x0 0x0>;
|
|
......
|
|
};
|
|
|
|
......
|
|
};
|
|
};
|
|
|
|
......
|
|
};
|
|
|
|
In this example, the root PCI bus node is the "/pci" which matches "pci-x86"
|
|
driver. It has a subnode "pcie@17,0" with driver "pci-bridge". "pcie@17,0"
|
|
also has subnode "topcliff@0,0" which is a "pci-bridge" too. Under that bridge,
|
|
a PCI UART device "uart@a,1" is described. This exactly reflects the hardware
|
|
bus hierarchy: on the root PCI bus, there is a PCIe root port which connects
|
|
to a downstream device Topcliff chipset. Inside Topcliff chipset, it has a
|
|
PCIe-to-PCI bridge and all the chipset integrated devices like the PCI UART
|
|
device are on the PCI bus. Like other devices in the device tree, if we want
|
|
to bind PCI devices before relocation, "bootph-all" must be declared
|
|
in each of these nodes.
|
|
|
|
If PCI devices are not listed in the device tree, U_BOOT_PCI_DEVICE can be used
|
|
to specify the driver to use for the device. The device tree takes precedence
|
|
over U_BOOT_PCI_DEVICE. Please note with U_BOOT_PCI_DEVICE, only drivers with
|
|
DM_FLAG_PRE_RELOC will be bound before relocation. If neither device tree nor
|
|
U_BOOT_PCI_DEVICE is provided, the built-in driver (either pci_bridge_drv or
|
|
pci_generic_drv) will be used.
|
|
|
|
|
|
Sandbox
|
|
-------
|
|
|
|
With sandbox we need a device emulator for each device on the bus since there
|
|
is no real PCI bus. This works by looking in the device tree node for an
|
|
emulator driver. For example::
|
|
|
|
pci@1f,0 {
|
|
compatible = "pci-generic";
|
|
reg = <0xf800 0 0 0 0>;
|
|
sandbox,emul = <&emul_1f>;
|
|
};
|
|
pci-emul {
|
|
compatible = "sandbox,pci-emul-parent";
|
|
emul_1f: emul@1f,0 {
|
|
compatible = "sandbox,swap-case";
|
|
#emul-cells = <0>;
|
|
};
|
|
};
|
|
|
|
This means that there is a 'sandbox,swap-case' driver at that bus position.
|
|
Note that the first cell in the 'reg' value is the bus/device/function. See
|
|
PCI_BDF() for the encoding (it is also specified in the IEEE Std 1275-1994
|
|
PCI bus binding document, v2.1)
|
|
|
|
The pci-emul node should go outside the pci bus node, since otherwise it will
|
|
be scanned as a PCI device, causing confusion.
|
|
|
|
When this bus is scanned we will end up with something like this::
|
|
|
|
`- * pci@0 @ 05c660c8, 0
|
|
`- pci@1f,0 @ 05c661c8, 63488
|
|
`- emul@1f,0 @ 05c662c8
|
|
|
|
When accesses go to the pci@1f,0 device they are forwarded to its emulator.
|
|
|
|
The sandbox PCI drivers also support dynamic driver binding, allowing device
|
|
driver to declare the driver binding information via U_BOOT_PCI_DEVICE(),
|
|
eliminating the need to provide any device tree node under the host controller
|
|
node. It is required a "sandbox,dev-info" property must be provided in the
|
|
host controller node for this functionality to work.
|
|
|
|
.. code-block:: none
|
|
|
|
pci1: pci@1 {
|
|
compatible = "sandbox,pci";
|
|
...
|
|
sandbox,dev-info = <0x08 0x00 0x1234 0x5678
|
|
0x0c 0x00 0x1234 0x5678>;
|
|
};
|
|
|
|
The "sandbox,dev-info" property specifies all dynamic PCI devices on this bus.
|
|
Each dynamic PCI device is encoded as 4 cells a group. The first and second
|
|
cells are PCI device number and function number respectively. The third and
|
|
fourth cells are PCI vendor ID and device ID respectively.
|
|
|
|
When this bus is scanned we will end up with something like this::
|
|
|
|
pci [ + ] pci_sandbo |-- pci1
|
|
pci_emul [ ] sandbox_sw | |-- sandbox_swap_case_emul
|
|
pci_emul [ ] sandbox_sw | `-- sandbox_swap_case_emul
|