mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 20:43:32 +00:00
1be82afa80
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
841 lines
No EOL
29 KiB
ReStructuredText
841 lines
No EOL
29 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
.. sectionauthor:: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
|
|
|
STM32MP1xx boards
|
|
=================
|
|
|
|
This is a quick instruction for setup STMicroelectronics STM32MP1xx boards.
|
|
|
|
Further information can be found in STMicroelectronics STM32 WIKI_.
|
|
|
|
Supported devices
|
|
-----------------
|
|
|
|
U-Boot supports all the STMicroelectronics MPU with the associated boards
|
|
|
|
- STMP32MP15x SoCs:
|
|
|
|
- STM32MP157
|
|
- STM32MP153
|
|
- STM32MP151
|
|
|
|
- STMP32MP13x SoCs:
|
|
|
|
- STM32MP135
|
|
- STM32MP133
|
|
- STM32MP131
|
|
|
|
Everything is supported in Linux but U-Boot is limited to the boot device:
|
|
|
|
1. UART
|
|
2. SD card/MMC controller (SDMMC)
|
|
3. NAND controller (FMC)
|
|
4. NOR controller (QSPI)
|
|
5. USB controller (OTG DWC2)
|
|
6. Ethernet controller
|
|
|
|
And the necessary drivers
|
|
|
|
1. I2C
|
|
2. STPMIC1 (PMIC and regulator)
|
|
3. Clock, Reset, Sysreset
|
|
4. Fuse (BSEC)
|
|
5. OP-TEE
|
|
6. ETH
|
|
7. USB host
|
|
8. WATCHDOG
|
|
9. RNG
|
|
10. RTC
|
|
|
|
STM32MP15x
|
|
``````````
|
|
|
|
The STM32MP15x is a Cortex-A7 MPU aimed at various applications.
|
|
|
|
It features:
|
|
|
|
- Dual core Cortex-A7 application core (Single on STM32MP151)
|
|
- 2D/3D image composition with GPU (only on STM32MP157)
|
|
- Standard memories interface support
|
|
- Standard connectivity, widely inherited from the STM32 MCU family
|
|
- Comprehensive security support
|
|
- Cortex M4 coprocessor
|
|
|
|
Each line comes with a security option (cryptography & secure boot) and
|
|
a Cortex-A frequency option:
|
|
|
|
- A : Cortex-A7 @ 650 MHz
|
|
- C : Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
|
|
- D : Cortex-A7 @ 800 MHz
|
|
- F : Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz
|
|
|
|
Currently the following boards are supported:
|
|
|
|
+ stm32mp157a-dk1.dts
|
|
+ stm32mp157c-dk2.dts
|
|
+ stm32mp157c-ed1.dts
|
|
+ stm32mp157c-ev1.dts
|
|
+ stm32mp15xx-dhcor-avenger96.dts
|
|
|
|
The SCMI variant of each board is supported by a specific "scmi" device tree:
|
|
+ stm32mp157a-dk1-scmi.dts
|
|
+ stm32mp157c-dk2-scmi.dts
|
|
+ stm32mp157c-ed1-scmi.dts
|
|
+ stm32mp157c-ev1-scmi.dts
|
|
|
|
SCMI variant is used only with stm32mp15_defconfig, when the resources are
|
|
secured with RCC_TZCR.TZEN=1 in OP-TEE. The access to these reset and clock
|
|
resources are provided by OP-TEE and the associated SCMI services.
|
|
|
|
STM32MP13x
|
|
``````````
|
|
|
|
The STM32MP13x is a single Cortex-A7 MPU aimed at various applications.
|
|
|
|
Currently the following boards are supported:
|
|
|
|
+ stm32mp135f-dk.dts
|
|
|
|
|
|
Boot Sequences
|
|
--------------
|
|
|
|
2 boot configurations are supported with:
|
|
|
|
+----------+------------------------+-------------------------+--------------+
|
|
| **ROM** | **FSBL** | **SSBL** | **OS** |
|
|
+ **code** +------------------------+-------------------------+--------------+
|
|
| | First Stage Bootloader | Second Stage Bootloader | Linux Kernel |
|
|
+ +------------------------+-------------------------+--------------+
|
|
| | embedded RAM | DDR |
|
|
+----------+------------------------+-------------------------+--------------+
|
|
| TrustZone| secure monitor |
|
|
+----------+------------------------+-------------------------+--------------+
|
|
|
|
The trusted boot chain is recommended with:
|
|
|
|
- FSBL = **TF-A BL2**
|
|
- Secure monitor = **OP-TEE**
|
|
- SSBL = **U-Boot**
|
|
|
|
It is the only supported boot chain for STM32MP13x family.
|
|
|
|
The **Trusted** boot chain with TF-A_
|
|
`````````````````````````````````````
|
|
|
|
defconfig_file :
|
|
+ **stm32mp15_defconfig** and **stm32mp13_defconfig** (for TF-A_ with FIP support)
|
|
+ **stm32mp15_trusted_defconfig** (for TF-A_ without FIP support)
|
|
|
|
+-------------+--------------------------+------------+-------+
|
|
| ROM code | FSBL | SSBL | OS |
|
|
+ +--------------------------+------------+-------+
|
|
| |Trusted Firmware-A (TF-A_)| U-Boot | Linux |
|
|
+-------------+--------------------------+------------+-------+
|
|
| TrustZone |secure monitor = SPMin or OP-TEE_ |
|
|
+-------------+--------------------------+------------+-------+
|
|
|
|
TF-A_ and OP-TEE_ are 2 separate projects, with their git repository;
|
|
they are compiled separately.
|
|
|
|
TF-A_ (BL2) initialize the DDR and loads the next stage binaries from a FIP file:
|
|
+ BL32: a secure monitor BL32 = SPMin provided by TF-A_ or OP-TEE_ :
|
|
performs a full initialization of Secure peripherals and provides service
|
|
to normal world
|
|
+ BL33: a non-trusted firmware = U-Boot, running in normal world and uses
|
|
the secure monitor to access to secure resources.
|
|
+ HW_CONFIG: The hardware configuration file = the U-Boot device tree
|
|
|
|
The scmi variant of each device tree is only support with OP-TEE as secure
|
|
monitor, with stm32mp15_defconfig.
|
|
|
|
The **Basic** boot chain with SPL (for STM32MP15x)
|
|
``````````````````````````````````````````````````
|
|
|
|
defconfig_file :
|
|
+ **stm32mp15_basic_defconfig**
|
|
|
|
+-------------+------------+------------+-------+
|
|
| ROM code | FSBL | SSBL | OS |
|
|
+ +------------+------------+-------+
|
|
| |U-Boot SPL | U-Boot | Linux |
|
|
+-------------+------------+------------+-------+
|
|
| TrustZone | | PSCI from U-Boot |
|
|
+-------------+------------+------------+-------+
|
|
|
|
SPL has limited security initialization.
|
|
|
|
U-Boot is running in secure mode and provide a secure monitor to the kernel
|
|
with only PSCI support (Power State Coordination Interface defined by ARM).
|
|
|
|
.. warning:: This alternate **basic** boot chain with SPL is not supported/promoted by STMicroelectronics to make product.
|
|
|
|
Device Tree
|
|
-----------
|
|
|
|
All the STM32MP15x and STM32MP13x boards supported by U-Boot use the same generic board
|
|
stm32mp1 which supports all the bootable devices.
|
|
|
|
Each STMicroelectronics board is only configured with the associated device tree.
|
|
|
|
STM32MP15x device Tree Selection
|
|
````````````````````````````````
|
|
The supported device trees for STM32MP15x (stm32mp15_trusted_defconfig and stm32mp15_basic_defconfig) are:
|
|
|
|
+ ev1: eval board with pmic stpmic1 (ev1 = mother board + daughter ed1)
|
|
|
|
+ stm32mp157c-ev1
|
|
|
|
+ ed1: daughter board with pmic stpmic1
|
|
|
|
+ stm32mp157c-ed1
|
|
|
|
+ dk1: Discovery board
|
|
|
|
+ stm32mp157a-dk1
|
|
|
|
+ dk2: Discovery board = dk1 with a BT/WiFI combo and a DSI panel
|
|
|
|
+ stm32mp157c-dk2
|
|
|
|
+ avenger96: Avenger96 board from Arrow Electronics based on DH Elec. DHCOR SoM
|
|
|
|
+ stm32mp15xx-dhcor-avenger96
|
|
|
|
STM32MP13x device Tree Selection
|
|
````````````````````````````````
|
|
The supported device trees for STM32MP13x (stm32mp13_defconfig) are:
|
|
|
|
+ dk: Discovery board
|
|
|
|
+ stm32mp135f-dk
|
|
|
|
|
|
Build Procedure
|
|
---------------
|
|
|
|
1. Install the required tools for U-Boot
|
|
|
|
* install package needed in U-Boot makefile
|
|
(libssl-dev, swig, libpython-dev...)
|
|
|
|
* install ARMv7 toolchain for 32bit Cortex-A (from Linaro,
|
|
from SDK for STM32MP15x, or any crosstoolchains from your distribution)
|
|
(you can use any gcc cross compiler compatible with U-Boot)
|
|
|
|
2. Set the cross compiler::
|
|
|
|
# export CROSS_COMPILE=/path/to/toolchain/arm-linux-gnueabi-
|
|
|
|
3. Select the output directory (optional)::
|
|
|
|
# export KBUILD_OUTPUT=/path/to/output
|
|
|
|
for example: use one output directory for each configuration::
|
|
|
|
# export KBUILD_OUTPUT=stm32mp13
|
|
# export KBUILD_OUTPUT=stm32mp15
|
|
# export KBUILD_OUTPUT=stm32mp15_trusted
|
|
# export KBUILD_OUTPUT=stm32mp15_basic
|
|
|
|
you can build outside of code directory::
|
|
|
|
# export KBUILD_OUTPUT=../build/stm32mp15
|
|
|
|
4. Configure U-Boot::
|
|
|
|
# make <defconfig_file>
|
|
|
|
with <defconfig_file>:
|
|
|
|
- For **trusted** boot mode :
|
|
- For STM32MP13x: **stm32mp13_defconfig**
|
|
- For STM32MP15x: **stm32mp15_defconfig** or stm32mp15_trusted_defconfig
|
|
- For STM32MP15x basic boot mode: stm32mp15_basic_defconfig
|
|
|
|
5. Configure the device-tree and build the U-Boot image::
|
|
|
|
# make DEVICE_TREE=<name> all
|
|
|
|
Examples:
|
|
|
|
a) trusted boot with FIP on STM32MP15x ev1::
|
|
|
|
# export KBUILD_OUTPUT=stm32mp15
|
|
# make stm32mp15_defconfig
|
|
# make DEVICE_TREE=stm32mp157c-ev1-scmi all
|
|
|
|
or without SCMI support
|
|
|
|
# export KBUILD_OUTPUT=stm32mp15
|
|
# make stm32mp15_defconfig
|
|
# make DEVICE_TREE=stm32mp157c-ev1 all
|
|
|
|
b) trusted boot on STM32MP13x discovery board::
|
|
|
|
# export KBUILD_OUTPUT=stm32mp13
|
|
# make stm32mp13_defconfig
|
|
# make DEVICE_TREE=stm32mp135f-dk all
|
|
|
|
DEVICE_TEE selection is optional as stm32mp135f-dk is the default board of the defconfig::
|
|
|
|
# make stm32mp13_defconfig
|
|
# make all
|
|
|
|
c) basic boot on STM32MP15x ev1::
|
|
|
|
# export KBUILD_OUTPUT=stm32mp15_basic
|
|
# make stm32mp15_basic_defconfig
|
|
# make DEVICE_TREE=stm32mp157c-ev1 all
|
|
|
|
d) basic boot on STM32MP15x ed1::
|
|
|
|
# export KBUILD_OUTPUT=stm32mp15_basic
|
|
# make stm32mp15_basic_defconfig
|
|
# make DEVICE_TREE=stm32mp157c-ed1 all
|
|
|
|
e) basic boot on STM32MP15x dk1::
|
|
|
|
# export KBUILD_OUTPUT=stm32mp15_basic
|
|
# make stm32mp15_basic_defconfig
|
|
# make DEVICE_TREE=stm32mp157a-dk1 all
|
|
|
|
f) basic boot on STM32MP15x avenger96::
|
|
|
|
# export KBUILD_OUTPUT=stm32mp15_basic
|
|
# make stm32mp15_basic_defconfig
|
|
# make DEVICE_TREE=stm32mp15xx-dhcor-avenger96 all
|
|
|
|
6. U-Boot Output files
|
|
|
|
So in the output directory (selected by KBUILD_OUTPUT),
|
|
you can found the needed U-Boot files:
|
|
|
|
- stm32mp13_defconfig = **u-boot-nodtb.bin** and **u-boot.dtb**
|
|
- stm32mp15_defconfig = **u-boot-nodtb.bin** and **u-boot.dtb**
|
|
|
|
- stm32mp15_trusted_defconfig = u-boot.stm32
|
|
|
|
- stm32mp15_basic_defconfig
|
|
|
|
- FSBL = spl/u-boot-spl.stm32
|
|
|
|
- SSBL = u-boot.img (without CONFIG_SPL_LOAD_FIT) or
|
|
u-boot.itb (with CONFIG_SPL_LOAD_FIT=y)
|
|
|
|
7. TF-A_ compilation
|
|
|
|
This step is required only for **Trusted** boot (stm32mp15_defconfig and
|
|
stm32mp15_trusted_defconfig); see OP-TEE_ and TF-A_ documentation for build
|
|
commands.
|
|
|
|
- For TF-A_ with FIP support: **stm32mp15_defconfig**
|
|
|
|
- with OP-TEE_ support, compile the OP-TEE to generate the binary included
|
|
in FIP
|
|
|
|
- after TF-A compilation, the used files are:
|
|
|
|
- TF-A_ BL2 => FSBL = **tf-a.stm32**
|
|
|
|
- FIP => **fip.bin**
|
|
|
|
FIP file includes the 2 files given in arguments of TF-A_ compilation:
|
|
|
|
- BL33=u-boot-nodtb.bin
|
|
- BL33_CFG=u-boot.dtb
|
|
|
|
You can also update a existing FIP after U-Boot compilation with fiptool,
|
|
a tool provided by TF-A_::
|
|
|
|
# fiptool update --nt-fw u-boot-nodtb.bin --hw-config u-boot.dtb fip-stm32mp157c-ev1.bin
|
|
|
|
- For TF-A_ without FIP support : **stm32mp15_trusted_defconfig**
|
|
SPMin is used and the used files are:
|
|
|
|
- FSBL = **tf-a.stm32** (provided by TF-A_ compilation, contening BL2 and
|
|
BL32 = SPMin)
|
|
|
|
- SSBL = **u-boot.stm32** used instead of fip.bin in next chapters
|
|
|
|
8. The bootloaders files
|
|
|
|
+ The **ROM code** expects FSBL binaries with STM32 image header =
|
|
tf-a.stm32 or u-boot-spl.stm32
|
|
|
|
According the FSBL / the boot mode:
|
|
|
|
+ **TF-A** expect a FIP binary = fip.bin, including the OS monitor (SPMin or
|
|
OP-TEE_) and the U-Boot binary + device tree
|
|
|
|
or, without FIP support, binaries with STM32 image header: U-Boot
|
|
= u-boot.stm32 and eventually OP-TEE files (tee-header.stm32, tee-pageable.stm32,
|
|
tee-pager.stm32)
|
|
|
|
+ **SPL** expects SSBL = U-Boot with uImage header = u-boot.img
|
|
or FIT = u-boot.itb.
|
|
|
|
|
|
Switch Setting for Boot Mode
|
|
----------------------------
|
|
|
|
You can select the boot mode, on the board with one switch, to select
|
|
the boot pin values = BOOT0, BOOT1, BOOT2
|
|
|
|
+-------------+---------+---------+---------+
|
|
|*Boot Mode* | *BOOT2* | *BOOT1* | *BOOT0* |
|
|
+=============+=========+=========+=========+
|
|
| Recovery | 0 | 0 | 0 |
|
|
+-------------+---------+---------+---------+
|
|
| NOR | 0 | 0 | 1 |
|
|
+-------------+---------+---------+---------+
|
|
| eMMC | 0 | 1 | 0 |
|
|
+-------------+---------+---------+---------+
|
|
| NAND | 0 | 1 | 1 |
|
|
+-------------+---------+---------+---------+
|
|
| Reserved | 1 | 0 | 0 |
|
|
+-------------+---------+---------+---------+
|
|
| SD-Card | 1 | 0 | 1 |
|
|
+-------------+---------+---------+---------+
|
|
| Recovery | 1 | 1 | 0 |
|
|
+-------------+---------+---------+---------+
|
|
| SPI-NAND | 1 | 1 | 1 |
|
|
+-------------+---------+---------+---------+
|
|
|
|
- on the STM32MP15x **daughter board ed1 = MB1263** with the switch SW1
|
|
- on STM32MP15x **Avenger96** with switch S3 (NOR and SPI-NAND are not applicable)
|
|
- on board STM32MP15x **DK1/DK2** with the switch SW1 = BOOT0, BOOT2
|
|
with only 2 pins available (BOOT1 is forced to 0 and NOR not supported),
|
|
the possible value becomes:
|
|
|
|
+-------------+---------+---------+
|
|
|*Boot Mode* | *BOOT2* | *BOOT0* |
|
|
+=============+=========+=========+
|
|
| Recovery | 0 | 0 |
|
|
+-------------+---------+---------+
|
|
| NOR (NA)| 0 | 1 |
|
|
+-------------+---------+---------+
|
|
| Reserved | 1 | 0 |
|
|
+-------------+---------+---------+
|
|
| SD-Card | 1 | 1 |
|
|
+-------------+---------+---------+
|
|
|
|
Recovery is a boot from serial link (UART/USB) and it is used with
|
|
STM32CubeProgrammer tool to load executable in RAM and to update the flash
|
|
devices available on the board (NOR/NAND/eMMC/SD card).
|
|
|
|
The communication between HOST and board is based on
|
|
|
|
- for UARTs : the uart protocol used with all MCU STM32
|
|
- for USB : based on USB DFU 1.1 (without the ST extensions used on MCU STM32)
|
|
|
|
Prepare an SD card
|
|
------------------
|
|
|
|
The minimal requirements for STMP32MP15x and STM32MP13x boot up to U-Boot are:
|
|
|
|
- GPT partitioning (with gdisk or with sgdisk)
|
|
- 2 fsbl partitions, named "fsbl1" and "fsbl2", size at least 256KiB
|
|
- one partition named "fip" for FIP or U-Boot (TF-A_ search the "fip"
|
|
partition and SPL search the 3th partition, because
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3)
|
|
|
|
The 2 fsbl partitions have the same content and are present to guarantee a
|
|
fail-safe update of FSBL; fsbl2 can be omitted if this ROM code feature is
|
|
not required.
|
|
|
|
Without FIP support in TF-A_, the 3rd partition "fip" for u-boot.stm32 must
|
|
be named "ssbl".
|
|
|
|
Then the minimal GPT partition is:
|
|
|
|
For TF-A_ with FIP support:
|
|
|
|
+-------+--------+---------+------------------------+
|
|
| *Num* | *Name* | *Size* | *Content* |
|
|
+=======+========+=========+========================+
|
|
| 1 | fsbl1 | 256 KiB | TF-A_ BL2 (tf-a.stm32) |
|
|
+-------+--------+---------+------------------------+
|
|
| 2 | fsbl2 | 256 KiB | TF-A_ BL2 (tf-a.stm32) |
|
|
+-------+--------+---------+------------------------+
|
|
| 3 | fip | 4MB | fip.bin |
|
|
+-------+--------+---------+------------------------+
|
|
| 4 | <any> | <any> | Rootfs |
|
|
+-------+--------+---------+------------------------+
|
|
|
|
or:
|
|
|
|
+-------+--------+---------+------------------------+------------------------+
|
|
| *Num* | *Name* | *Size* | *Trusted boot content* | *Basic boot content* |
|
|
+=======+========+=========+========================+========================+
|
|
| 1 | fsbl1 | 256 KiB | TF-A_ BL2 (tf-a.stm32) | SPL (u-boot-spl.stm32) |
|
|
+-------+--------+---------+------------------------+------------------------+
|
|
| 2 | fsbl2 | 256 KiB | TF-A_ BL2 (tf-a.stm32) | SPL (u-boot-spl.stm32) |
|
|
+-------+--------+---------+------------------------+------------------------+
|
|
| 3 | ssbl | 2MB | U-Boot (u-boot.stm32) | U-Boot (u-boot.img) |
|
|
+-------+--------+---------+------------------------+------------------------+
|
|
| 4 | <any> | <any> | Rootfs |
|
|
+-------+--------+---------+------------------------+------------------------+
|
|
|
|
And the 4th partition (Rootfs) is marked bootable with a file extlinux.conf
|
|
following the Generic Distribution feature (see :doc:`../../develop/distro` for
|
|
use).
|
|
|
|
The size of fip or ssbl partition must be enough for the associated binary file,
|
|
4MB and 2MB are default values.
|
|
|
|
According the used card reader select the correct block device
|
|
(for example /dev/sdx or /dev/mmcblk0), in the next example, it is /dev/mmcblk0
|
|
|
|
For example:
|
|
|
|
a) remove previous formatting::
|
|
|
|
# sgdisk -o /dev/<SD card dev>
|
|
|
|
b) create minimal image for FIP
|
|
|
|
For FIP support in TF-A_::
|
|
|
|
# sgdisk --resize-table=128 -a 1 \
|
|
-n 1:34:545 -c 1:fsbl1 \
|
|
-n 2:546:1057 -c 2:fsbl2 \
|
|
-n 3:1058:9249 -c 3:fip \
|
|
-n 4:9250: -c 4:rootfs -A 4:set:2 \
|
|
-p /dev/<SD card dev>
|
|
|
|
With gpt table with 128 entries an the partition 4 marked bootable (bit 2).
|
|
|
|
For basic boot mode or without FIP support in TF-A_::
|
|
|
|
# sgdisk --resize-table=128 -a 1 \
|
|
-n 1:34:545 -c 1:fsbl1 \
|
|
-n 2:546:1057 -c 2:fsbl2 \
|
|
-n 3:1058:5153 -c 3:ssbl \
|
|
-n 4:5154: -c 4:rootfs -A 4:set:2 \
|
|
-p /dev/<SD card dev>
|
|
|
|
c) copy the FSBL (2 times) and SSBL file on the correct partition.
|
|
in this example in partition 1 to 3
|
|
|
|
for trusted boot: ::
|
|
|
|
# dd if=tf-a.stm32 of=/dev/mmcblk0p1
|
|
# dd if=tf-a.stm32 of=/dev/mmcblk0p2
|
|
# dd if=fip.bin of=/dev/mmcblk0p3
|
|
OR
|
|
dd if=u-boot.stm32 of=/dev/mmcblk0p3 # Without FIT support
|
|
|
|
for basic boot mode : <SD card dev> = /dev/mmcblk0::
|
|
|
|
# dd if=u-boot-spl.stm32 of=/dev/mmcblk0p1
|
|
# dd if=u-boot-spl.stm32 of=/dev/mmcblk0p2
|
|
# dd if=u-boot.img of=/dev/mmcblk0p3 # Without CONFIG_SPL_LOAD_FIT
|
|
OR
|
|
dd if=u-boot.itb of=/dev/mmcblk0p3 # With CONFIG_SPL_LOAD_FIT=y
|
|
|
|
To boot from SD card, select BootPinMode = 1 0 1 and reset.
|
|
|
|
Prepare eMMC
|
|
------------
|
|
|
|
You can use U-Boot to copy binary in eMMC.
|
|
|
|
In the next example, you need to boot from SD card and the images
|
|
(tf-a.stm32, fip.bin / u-boot-spl.stm32, u-boot.img for systems without
|
|
CONFIG_SPL_LOAD_FIT or u-boot.itb for systems with CONFIG_SPL_LOAD_FIT=y) are
|
|
presents on SD card (mmc 0) in ext4 partition 4 (bootfs)
|
|
|
|
To boot from SD card, select BootPinMode = 1 0 1 and reset.
|
|
|
|
Then you update the eMMC with the next U-Boot command :
|
|
|
|
a) prepare GPT on eMMC,
|
|
example with 3 partitions, fip, bootfs and roots::
|
|
|
|
# setenv emmc_part "name=fip,size=4MiB;name=bootfs,type=linux,bootable,size=64MiB;name=rootfs,type=linux,size=512"
|
|
# gpt write mmc 1 ${emmc_part}
|
|
|
|
b) copy FSBL, TF-A_ or SPL, on first eMMC boot partition
|
|
(SPL max size is 256kB, with LBA 512, 0x200)::
|
|
|
|
# ext4load mmc 0:4 0xC0000000 tf-a.stm32
|
|
or
|
|
# ext4load mmc 0:4 0xC0000000 u-boot-spl.stm32
|
|
|
|
# mmc dev 1
|
|
# mmc partconf 1 1 1 1
|
|
# mmc write ${fileaddr} 0 200
|
|
# mmc partconf 1 1 1 0
|
|
|
|
c) copy SSBL, FIP or U-Boot binary, in first GPT partition of eMMC::
|
|
|
|
# ext4load mmc 0:4 0xC0000000 fip.bin
|
|
or
|
|
# ext4load mmc 0:4 0xC0000000 u-boot.img # Without CONFIG_SPL_LOAD_FIT
|
|
or
|
|
# ext4load mmc 0:4 0xC0000000 u-boot.itb # With CONFIG_SPL_LOAD_FIT=y
|
|
|
|
|
|
# mmc dev 1
|
|
# part start mmc 1 1 partstart
|
|
# mmc write ${fileaddr} ${partstart} ${filesize}
|
|
|
|
To boot from eMMC, select BootPinMode = 0 1 0 and reset.
|
|
|
|
MAC Address
|
|
-----------
|
|
|
|
Please read doc/README.enetaddr for the implementation guidelines for mac id
|
|
usage. Basically, environment has precedence over board specific storage.
|
|
|
|
For STMicroelectronics board, it is retrieved in:
|
|
|
|
- STM32MP15x OTP:
|
|
|
|
- OTP_57[31:0] = MAC_ADDR[31:0]
|
|
- OTP_58[15:0] = MAC_ADDR[47:32]
|
|
|
|
- STM32MP13x OTP:
|
|
|
|
- OTP_57[31:0] = MAC_ADDR0[31:0]
|
|
- OTP_58[15:0] = MAC_ADDR0[47:32]
|
|
- OTP_58[31:16] = MAC_ADDR1[15:0]
|
|
- OTP_59[31:0] = MAC_ADDR1[47:16]
|
|
|
|
To program a MAC address on virgin STM32MP15x OTP words above, you can use the fuse command
|
|
on bank 0 to access to internal OTP and lock them:
|
|
|
|
In the next example we are using the 2 OTPs used on STM32MP15x.
|
|
|
|
Prerequisite: check if a MAC address isn't yet programmed in OTP
|
|
|
|
1) check OTP: their value must be equal to 0::
|
|
|
|
STM32MP> fuse sense 0 57 2
|
|
Sensing bank 0:
|
|
Word 0x00000039: 00000000 00000000
|
|
|
|
2) check environment variable::
|
|
|
|
STM32MP> env print ethaddr
|
|
## Error: "ethaddr" not defined
|
|
|
|
3) check lock status of fuse 57 & 58 (at 0x39, 0=unlocked, 0x40000000=locked)::
|
|
|
|
STM32MP> fuse sense 0 0x10000039 2
|
|
Sensing bank 0:
|
|
Word 0x10000039: 00000000 00000000
|
|
|
|
Example to set mac address "12:34:56:78:9a:bc"
|
|
|
|
1) Write OTP::
|
|
|
|
STM32MP> fuse prog -y 0 57 0x78563412 0x0000bc9a
|
|
|
|
2) Read OTP::
|
|
|
|
STM32MP> fuse sense 0 57 2
|
|
Sensing bank 0:
|
|
Word 0x00000039: 78563412 0000bc9a
|
|
|
|
3) Lock OTP::
|
|
|
|
STM32MP> fuse prog 0 0x10000039 0x40000000 0x40000000
|
|
|
|
STM32MP> fuse sense 0 0x10000039 2
|
|
Sensing bank 0:
|
|
Word 0x10000039: 40000000 40000000
|
|
|
|
4) next REBOOT, in the trace::
|
|
|
|
### Setting environment from OTP MAC address = "12:34:56:78:9a:bc"
|
|
|
|
5) check env update::
|
|
|
|
STM32MP> env print ethaddr
|
|
ethaddr=12:34:56:78:9a:bc
|
|
|
|
.. warning:: This command can't be executed twice on the same board as
|
|
OTP are protected. It is already done for the board
|
|
provided by STMicroelectronics.
|
|
|
|
Coprocessor firmware on STM32MP15x
|
|
----------------------------------
|
|
|
|
U-Boot can boot the coprocessor before the kernel (coprocessor early boot).
|
|
|
|
a) Manuallly by using rproc commands (update the bootcmd)
|
|
|
|
Configurations::
|
|
|
|
# env set name_copro "rproc-m4-fw.elf"
|
|
# env set dev_copro 0
|
|
# env set loadaddr_copro 0xC1000000
|
|
|
|
Load binary from bootfs partition (number 4) on SD card (mmc 0)::
|
|
|
|
# ext4load mmc 0:4 ${loadaddr_copro} ${name_copro}
|
|
|
|
=> ${filesize} variable is updated with the size of the loaded file.
|
|
|
|
Start M4 firmware with remote proc command::
|
|
|
|
# rproc init
|
|
# rproc load ${dev_copro} ${loadaddr_copro} ${filesize}
|
|
# rproc start ${dev_copro}"00270033
|
|
|
|
b) Automatically by using FIT feature and generic DISTRO bootcmd
|
|
|
|
see examples in the board stm32mp1 directory: fit_copro_kernel_dtb.its
|
|
|
|
Generate FIT including kernel + device tree + M4 firmware with cfg with M4
|
|
boot::
|
|
|
|
$> mkimage -f fit_copro_kernel_dtb.its fit_copro_kernel_dtb.itb
|
|
|
|
Then using DISTRO configuration file: see extlinux.conf to select the correct
|
|
configuration:
|
|
|
|
- stm32mp157c-ev1-m4
|
|
- stm32mp157c-dk2-m4
|
|
|
|
DFU support
|
|
-----------
|
|
|
|
The DFU is supported on ST board.
|
|
|
|
The env variable dfu_alt_info is automatically build, and all
|
|
the memory present on the ST boards are exported.
|
|
|
|
The dfu mode is started by the command::
|
|
|
|
STM32MP> dfu 0
|
|
|
|
On EV1 board, booting from SD card, without OP-TEE_::
|
|
|
|
STM32MP> dfu 0 list
|
|
DFU alt settings list:
|
|
dev: RAM alt: 0 name: uImage layout: RAM_ADDR
|
|
dev: RAM alt: 1 name: devicetree.dtb layout: RAM_ADDR
|
|
dev: RAM alt: 2 name: uramdisk.image.gz layout: RAM_ADDR
|
|
dev: eMMC alt: 3 name: mmc0_fsbl1 layout: RAW_ADDR
|
|
dev: eMMC alt: 4 name: mmc0_fsbl2 layout: RAW_ADDR
|
|
dev: eMMC alt: 5 name: mmc0_fip layout: RAW_ADDR
|
|
dev: eMMC alt: 6 name: mmc0_bootfs layout: RAW_ADDR
|
|
dev: eMMC alt: 7 name: mmc0_vendorfs layout: RAW_ADDR
|
|
dev: eMMC alt: 8 name: mmc0_rootfs layout: RAW_ADDR
|
|
dev: eMMC alt: 9 name: mmc0_userfs layout: RAW_ADDR
|
|
dev: eMMC alt: 10 name: mmc1_boot1 layout: RAW_ADDR
|
|
dev: eMMC alt: 11 name: mmc1_boot2 layout: RAW_ADDR
|
|
dev: eMMC alt: 12 name: mmc1_fip layout: RAW_ADDR
|
|
dev: eMMC alt: 13 name: mmc1_bootfs layout: RAW_ADDR
|
|
dev: eMMC alt: 14 name: mmc1_vendorfs layout: RAW_ADDR
|
|
dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR
|
|
dev: eMMC alt: 16 name: mmc1_userfs layout: RAW_ADDR
|
|
dev: MTD alt: 17 name: nor0 layout: RAW_ADDR
|
|
dev: MTD alt: 18 name: nor1 layout: RAW_ADDR
|
|
dev: MTD alt: 19 name: nand0 layout: RAW_ADDR
|
|
dev: VIRT alt: 20 name: OTP layout: RAW_ADDR
|
|
dev: VIRT alt: 21 name: PMIC layout: RAW_ADDR
|
|
|
|
All the supported device are exported for dfu-util tool::
|
|
|
|
$> dfu-util -l
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="PMIC", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="OTP", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nand0", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor1", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor0", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="mmc1_userfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=14, name="mmc1_vendorfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=13, name="mmc1_bootfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=12, name="mmc1_fip", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=11, name="mmc1_boot2", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=10, name="mmc1_boot1", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=9, name="mmc0_userfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=8, name="mmc0_rootfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=7, name="mmc0_vendorfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=6, name="mmc0_bootfs", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=5, name="mmc0_fip", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=4, name="mmc0_fsbl2", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=3, name="mmc0_fsbl1", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=2, name="uramdisk.image.gz", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=1, name="devicetree.dtb", serial="002700333338511934383330"
|
|
Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=0, name="uImage", serial="002700333338511934383330"
|
|
|
|
You can update the boot device:
|
|
|
|
- SD card (mmc0)::
|
|
|
|
$> dfu-util -d 0483:5720 -a 3 -D tf-a-stm32mp157c-ev1.stm32
|
|
$> dfu-util -d 0483:5720 -a 4 -D tf-a-stm32mp157c-ev1.stm32
|
|
$> dfu-util -d 0483:5720 -a 5 -D fip-stm32mp157c-ev1.bin
|
|
$> dfu-util -d 0483:5720 -a 6 -D st-image-bootfs-openstlinux-weston-stm32mp1.ext4
|
|
$> dfu-util -d 0483:5720 -a 7 -D st-image-vendorfs-openstlinux-weston-stm32mp1.ext4
|
|
$> dfu-util -d 0483:5720 -a 8 -D st-image-weston-openstlinux-weston-stm32mp1.ext4
|
|
$> dfu-util -d 0483:5720 -a 9 -D st-image-userfs-openstlinux-weston-stm32mp1.ext4
|
|
|
|
- EMMC (mmc1)::
|
|
|
|
$> dfu-util -d 0483:5720 -a 10 -D tf-a-stm32mp157c-ev1.stm32
|
|
$> dfu-util -d 0483:5720 -a 11 -D tf-a-stm32mp157c-ev1.stm32
|
|
$> dfu-util -d 0483:5720 -a 12 -D fip-stm32mp157c-ev1.bin
|
|
$> dfu-util -d 0483:5720 -a 13 -D st-image-bootfs-openstlinux-weston-stm32mp1.ext4
|
|
$> dfu-util -d 0483:5720 -a 14 -D st-image-vendorfs-openstlinux-weston-stm32mp1.ext4
|
|
$> dfu-util -d 0483:5720 -a 15 -D st-image-weston-openstlinux-weston-stm32mp1.ext4
|
|
$> dfu-util -d 0483:5720 -a 16 -D st-image-userfs-openstlinux-weston-stm32mp1.ext4
|
|
|
|
- you can also dump the OTP and the PMIC NVM with::
|
|
|
|
$> dfu-util -d 0483:5720 -a 19 -U otp.bin
|
|
$> dfu-util -d 0483:5720 -a 20 -U pmic.bin
|
|
|
|
|
|
When the board is booting for nor0 or nand0,
|
|
only the MTD partition on the boot devices are available, for example:
|
|
|
|
- NOR (nor0 = alt 20, nor1 = alt 26) & NAND (nand0 = alt 27) :
|
|
|
|
$> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32
|
|
$> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32
|
|
$> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin
|
|
$> dfu-util -d 0483:5720 -a 28 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi
|
|
|
|
- NAND (nand0 = alt 21)::
|
|
|
|
$> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32
|
|
$> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin
|
|
$> dfu-util -d 0483:5720 -a 24 -D fip-stm32mp157c-ev1.bin
|
|
$> dfu-util -d 0483:5720 -a 25 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi
|
|
|
|
References
|
|
----------
|
|
|
|
.. _WIKI:
|
|
|
|
STM32 Arm® Cortex®-based MPUs user guide
|
|
|
|
+ https://wiki.st.com/
|
|
+ https://wiki.st.com/stm32mpu/wiki/Main_Page
|
|
|
|
.. _TF-A:
|
|
|
|
TF-A = The Trusted Firmware-A project provides a reference implementation of
|
|
secure world software for Armv7-A and Armv8-A class processors
|
|
|
|
+ https://www.trustedfirmware.org/projects/tf-a/
|
|
+ https://trustedfirmware-a.readthedocs.io/en/latest/
|
|
+ https://trustedfirmware-a.readthedocs.io/en/latest/plat/stm32mp1.html
|
|
+ https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/
|
|
|
|
.. _OP-TEE:
|
|
|
|
OP-TEE = an open source Trusted Execution Environment (TEE) implementing the
|
|
Arm TrustZone technology
|
|
|
|
+ https://www.op-tee.org/
|
|
+ https://optee.readthedocs.io/en/latest/
|
|
+ https://optee.readthedocs.io/en/latest/building/devices/stm32mp1.html
|
|
+ https://github.com/OP-TEE/optee_os |