mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 20:43:32 +00:00
6f63c296fe
This adds a simple Northstar "BRCMNS" board to be used with the BCM4708x and BCM5301x chips. The main intention is to use this with the D-Link DIR-890L and DIR-885L routers for loading the kernel into RAM from NAND memory using the BCH-1 ECC and using the separately submitted SEAMA load command, so we are currently not adding support for things such as networking. The DTS file is a multiplatform NorthStar board, designed to be usable with several NorthStar designs by avoiding any particulars not related to the operation of U-Boot. If other board need other ECC for example, they need to create a separate DTS file and augment the code, but I don't know if any other users will turn up. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
44 lines
1.5 KiB
ReStructuredText
44 lines
1.5 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. Copyright (C) 2023 Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
Broadcom Northstar Boards
|
|
=========================
|
|
|
|
This document describes how to use U-Boot on the Broadcom Northstar
|
|
boards, comprised of the Cortex A9 ARM-based BCM470x and BCM5301x SoCs. These
|
|
were introduced in 2012-2013 and some of them are also called StrataGX.
|
|
|
|
Northstar is part of the iProc SoC family.
|
|
|
|
A good overview of these boards can be found in Jon Mason's presentation
|
|
"Enabling New Hardware in U-Boot" where the difference between Northstar
|
|
and Northstar Plus and Northstar 2 (Aarch64) is addressed.
|
|
|
|
The ROM in the Northstar SoC will typically look into NOR flash memory
|
|
for a boot loader, and the way this works is undocumented. It should be
|
|
possible to execute U-Boot as the first binary from the NOR flash but
|
|
this usage path is unexplored. Please add information if you know more.
|
|
|
|
D-Link Boards
|
|
-------------
|
|
|
|
When we use U-Boot with D-Link routers, the NOR flash has a boot loader
|
|
and web server that can re-flash the bigger NAND flash memory for object
|
|
code in the SEAMA format, so on these platforms U-Boot is converted into
|
|
a SEAMA binary and installed in the SoC using the flash tool resident in
|
|
the NOR flash. Details can be found in the OpenWrt project codebase.
|
|
|
|
Configure
|
|
---------
|
|
|
|
.. code-block:: console
|
|
|
|
$ make CROSS_COMPILE=${CROSS_COMPILE} bcmns_defconfig
|
|
|
|
Build
|
|
-----
|
|
|
|
.. code-block:: console
|
|
|
|
$ make CROSS_COMPILE=${CROSS_COMPILE}
|
|
$ ${CROSS_COMPILE}strip u-boot
|