mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
b891ff18f8
Chapter 23 of the EFI spec (rev 2.9) says: "A specific updatable hardware firmware store must be represented by exactly one FMP instance". This is not the case for us, since both of our FMP protocols can be installed at the same time because they are controlled by a single 'dfu_alt_info' env variable. So make the config options depend on each other and allow the user to install one of them at any given time. If we fix the meta-data provided by the 'dfu_alt_info' in the future, to hint about the capsule type (fit or raw) we can revise this and enable both FMPs to be installed, as long as they target different firmware hardware stores Note that we are not using a Kconfig 'choice' on purpose, since we want to allow both of those to be installed and tested in sandbox Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
190 lines
5 KiB
Text
190 lines
5 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_POSITION_INDEPENDENT=y
|
|
CONFIG_ARCH_ZYNQMP=y
|
|
CONFIG_SYS_TEXT_BASE=0x8000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
|
CONFIG_SYS_MEMTEST_START=0x00000000
|
|
CONFIG_SYS_MEMTEST_END=0x00001000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
|
|
CONFIG_SPL=y
|
|
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
|
CONFIG_SPL_SPI_SUPPORT=y
|
|
CONFIG_ZYNQ_MAC_IN_EEPROM=y
|
|
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
|
|
CONFIG_CMD_FRU=y
|
|
CONFIG_ZYNQMP_USB=y
|
|
CONFIG_AHCI=y
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
|
|
CONFIG_USE_PREBOOT=y
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
CONFIG_BOARD_EARLY_INIT_R=y
|
|
CONFIG_SPL_FPGA=y
|
|
CONFIG_SPL_OS_BOOT=y
|
|
CONFIG_SPL_RAM_SUPPORT=y
|
|
CONFIG_SPL_RAM_DEVICE=y
|
|
CONFIG_SPL_SPI_LOAD=y
|
|
CONFIG_SPL_ATF=y
|
|
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
|
|
CONFIG_CMD_BOOTMENU=y
|
|
CONFIG_CMD_THOR_DOWNLOAD=y
|
|
CONFIG_CMD_NVEDIT_EFI=y
|
|
CONFIG_CMD_MEMTEST=y
|
|
CONFIG_SYS_ALT_MEMTEST=y
|
|
CONFIG_CMD_BIND=y
|
|
CONFIG_CMD_CLK=y
|
|
CONFIG_CMD_DFU=y
|
|
CONFIG_CMD_FPGA_LOADBP=y
|
|
CONFIG_CMD_FPGA_LOADP=y
|
|
CONFIG_CMD_FPGA_LOAD_SECURE=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_NAND_LOCK_UNLOCK=y
|
|
CONFIG_CMD_POWEROFF=y
|
|
CONFIG_CMD_SDRAM=y
|
|
CONFIG_CMD_SF_TEST=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
CONFIG_CMD_TFTPPUT=y
|
|
CONFIG_CMD_BMP=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EFIDEBUG=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_GETTIME=y
|
|
CONFIG_CMD_TIMER=y
|
|
CONFIG_CMD_TPM=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_CMD_MTDPARTS_SPREAD=y
|
|
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_PARTITION_TYPE_GUID=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1 zynqmp-sm-k26-revA zynqmp-smk-k26-revA"
|
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains"
|
|
CONFIG_ENV_IS_NOWHERE=y
|
|
CONFIG_ENV_IS_IN_FAT=y
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_NETCONSOLE=y
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
CONFIG_SCSI_AHCI=y
|
|
CONFIG_SATA_CEVA=y
|
|
CONFIG_CLK_ZYNQMP=y
|
|
CONFIG_DFU_TFTP=y
|
|
CONFIG_DFU_TIMEOUT=y
|
|
CONFIG_DFU_MMC=y
|
|
CONFIG_DFU_NAND=y
|
|
CONFIG_DFU_RAM=y
|
|
CONFIG_DFU_SF=y
|
|
CONFIG_DFU_MTD=y
|
|
CONFIG_USB_FUNCTION_FASTBOOT=y
|
|
CONFIG_FASTBOOT_FLASH=y
|
|
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
|
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
|
CONFIG_FPGA_XILINX=y
|
|
CONFIG_FPGA_ZYNQMPPL=y
|
|
CONFIG_GPIO_HOG=y
|
|
CONFIG_XILINX_GPIO=y
|
|
CONFIG_DM_PCA953X=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_SYS_I2C_CADENCE=y
|
|
CONFIG_I2C_MUX=y
|
|
CONFIG_I2C_MUX_PCA954x=y
|
|
CONFIG_LED=y
|
|
CONFIG_LED_GPIO=y
|
|
CONFIG_MISC=y
|
|
CONFIG_I2C_EEPROM=y
|
|
CONFIG_SYS_I2C_EEPROM_ADDR=0x0
|
|
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_MMC_IO_VOLTAGE=y
|
|
CONFIG_MMC_UHS_SUPPORT=y
|
|
CONFIG_MMC_HS200_SUPPORT=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_ZYNQ=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_NAND_ARASAN=y
|
|
CONFIG_SYS_NAND_MAX_CHIPS=2
|
|
CONFIG_SPI_FLASH_BAR=y
|
|
CONFIG_SF_DUAL_FLASH=y
|
|
CONFIG_SPI_FLASH_ISSI=y
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_SPI_FLASH_SST=y
|
|
CONFIG_SPI_FLASH_WINBOND=y
|
|
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
|
CONFIG_SPI_FLASH_MTD=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_PHY_MICREL=y
|
|
CONFIG_PHY_MICREL_KSZ90X1=y
|
|
CONFIG_PHY_NATSEMI=y
|
|
CONFIG_PHY_REALTEK=y
|
|
CONFIG_PHY_TI_DP83867=y
|
|
CONFIG_PHY_VITESSE=y
|
|
CONFIG_PHY_XILINX_GMII2RGMII=y
|
|
CONFIG_PHY_FIXED=y
|
|
CONFIG_XILINX_AXIEMAC=y
|
|
CONFIG_ZYNQ_GEM=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_RTC_EMULATION=y
|
|
CONFIG_SCSI=y
|
|
CONFIG_DM_SCSI=y
|
|
CONFIG_ARM_DCC=y
|
|
CONFIG_XILINX_UARTLITE=y
|
|
CONFIG_ZYNQ_SERIAL=y
|
|
CONFIG_SPI=y
|
|
CONFIG_ZYNQ_SPI=y
|
|
CONFIG_ZYNQMP_GQSPI=y
|
|
CONFIG_TPM2_TIS_SPI=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_DWC3=y
|
|
CONFIG_USB_DWC3_GENERIC=y
|
|
CONFIG_USB_ULPI_VIEWPORT=y
|
|
CONFIG_USB_ULPI=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
|
|
CONFIG_USB_FUNCTION_THOR=y
|
|
CONFIG_USB_ETHER=y
|
|
CONFIG_USB_ETH_CDC=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_DM_VIDEO=y
|
|
CONFIG_VIDEO_COPY=y
|
|
CONFIG_DISPLAY=y
|
|
CONFIG_VIDEO_SEPS525=y
|
|
CONFIG_LCD=y
|
|
CONFIG_SPLASH_SCREEN=y
|
|
CONFIG_BMP_16BPP=y
|
|
CONFIG_BMP_24BPP=y
|
|
CONFIG_BMP_32BPP=y
|
|
CONFIG_WDT=y
|
|
CONFIG_WDT_CDNS=y
|
|
CONFIG_PANIC_HANG=y
|
|
CONFIG_TPM=y
|
|
CONFIG_SPL_GZIP=y
|
|
# CONFIG_SPL_HEXDUMP is not set
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|
|
CONFIG_EFI_SET_TIME=y
|
|
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
|
|
CONFIG_EFI_CAPSULE_ON_DISK=y
|
|
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
|