mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-10-22 22:14:45 +00:00
b890acc743
Now we have moved all the Amlogic board support to common generic board code, we can move the identical board_init() and ft_board_setup() functions to weak functions into the board-common mach-meson file. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> |
||
---|---|---|
.. | ||
MAINTAINERS | ||
Makefile | ||
odroid-c2.c | ||
README.nanopi-k2 | ||
README.odroid-c2 |
U-Boot for ODROID-C2 ==================== ODROID-C2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications: - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz - ARM Mali 450 GPU - 2GB DDR3 SDRAM - Gigabit Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver Schematics are available on the manufacturer website. Currently the u-boot port supports the following devices: - serial - eMMC, microSD - Ethernet - I2C - Regulators - Reset controller - Clock controller - ADC u-boot compilation ================== > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make odroid-c2_defconfig > make Image creation ============== Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: > DIR=odroid-c2 > git clone --depth 1 \ https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ $DIR > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ --bl301 $DIR/fip/gxb/bl301.bin \ --bl31 $DIR/fip/gxb/bl31.bin \ --bl33 u-boot.bin \ $DIR/fip.bin > $DIR/fip/fip_create --dump $DIR/fip.bin > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ --input $DIR/boot_new.bin \ --output $DIR/u-boot.img > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 and then write the image to SD with: > DEV=/dev/your_sd_device > BL1=$DIR/sd_fuse/bl1.bin.hardkernel > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97