u-boot/drivers/pinctrl/rockchip/pinctrl-rk3308.c
Jagan Teki 32b2ea9818 pinctrl: rockchip: Add pinctrl route types
Some pins in rockchip are routed via Top GRF and PMU GRF
instead of direct regmap.

Add support to handle all these routing paths so that the
SoC pinctrl drivers will use them accordingly.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:11 +08:00

457 lines
9.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <dm/pinctrl.h>
#include <regmap.h>
#include <syscon.h>
#include <linux/bitops.h>
#include "pinctrl-rockchip.h"
static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
{
.num = 1,
.pin = 14,
.reg = 0x28,
.bit = 12,
.mask = 0xf
}, {
.num = 1,
.pin = 15,
.reg = 0x2c,
.bit = 0,
.mask = 0x3
}, {
.num = 1,
.pin = 18,
.reg = 0x30,
.bit = 4,
.mask = 0xf
}, {
.num = 1,
.pin = 19,
.reg = 0x30,
.bit = 8,
.mask = 0xf
}, {
.num = 1,
.pin = 20,
.reg = 0x30,
.bit = 12,
.mask = 0xf
}, {
.num = 1,
.pin = 21,
.reg = 0x34,
.bit = 0,
.mask = 0xf
}, {
.num = 1,
.pin = 22,
.reg = 0x34,
.bit = 4,
.mask = 0xf
}, {
.num = 1,
.pin = 23,
.reg = 0x34,
.bit = 8,
.mask = 0xf
}, {
.num = 3,
.pin = 12,
.reg = 0x68,
.bit = 8,
.mask = 0xf
}, {
.num = 3,
.pin = 13,
.reg = 0x68,
.bit = 12,
.mask = 0xf
}, {
.num = 2,
.pin = 2,
.reg = 0x608,
.bit = 0,
.mask = 0x7
}, {
.num = 2,
.pin = 3,
.reg = 0x608,
.bit = 4,
.mask = 0x7
}, {
.num = 2,
.pin = 16,
.reg = 0x610,
.bit = 8,
.mask = 0x7
}, {
.num = 3,
.pin = 10,
.reg = 0x610,
.bit = 0,
.mask = 0x7
}, {
.num = 3,
.pin = 11,
.reg = 0x610,
.bit = 4,
.mask = 0x7
},
};
static struct rockchip_mux_route_data rk3308_mux_route_data[] = {
{
/* rtc_clk */
.bank_num = 0,
.pin = 19,
.func = 1,
.route_offset = 0x314,
.route_val = BIT(16 + 0) | BIT(0),
}, {
/* uart2_rxm0 */
.bank_num = 1,
.pin = 22,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 2) | BIT(16 + 3),
}, {
/* uart2_rxm1 */
.bank_num = 4,
.pin = 26,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 2) | BIT(16 + 3) | BIT(2),
}, {
/* i2c3_sdam0 */
.bank_num = 0,
.pin = 15,
.func = 2,
.route_offset = 0x608,
.route_val = BIT(16 + 8) | BIT(16 + 9),
}, {
/* i2c3_sdam1 */
.bank_num = 3,
.pin = 12,
.func = 2,
.route_offset = 0x608,
.route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(8),
}, {
/* i2c3_sdam2 */
.bank_num = 2,
.pin = 0,
.func = 3,
.route_offset = 0x608,
.route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(9),
}, {
/* i2s-8ch-1-sclktxm0 */
.bank_num = 1,
.pin = 3,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3),
}, {
/* i2s-8ch-1-sclkrxm0 */
.bank_num = 1,
.pin = 4,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3),
}, {
/* i2s-8ch-1-sclktxm1 */
.bank_num = 1,
.pin = 13,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3) | BIT(3),
}, {
/* i2s-8ch-1-sclkrxm1 */
.bank_num = 1,
.pin = 14,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3) | BIT(3),
}, {
/* pdm-clkm0 */
.bank_num = 1,
.pin = 4,
.func = 3,
.route_offset = 0x308,
.route_val = BIT(16 + 12) | BIT(16 + 13),
}, {
/* pdm-clkm1 */
.bank_num = 1,
.pin = 14,
.func = 4,
.route_offset = 0x308,
.route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12),
}, {
/* pdm-clkm2 */
.bank_num = 2,
.pin = 6,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13),
}, {
/* pdm-clkm-m2 */
.bank_num = 2,
.pin = 4,
.func = 3,
.route_offset = 0x600,
.route_val = BIT(16 + 2) | BIT(2),
}, {
/* spi1_miso */
.bank_num = 3,
.pin = 10,
.func = 3,
.route_offset = 0x314,
.route_val = BIT(16 + 9),
}, {
/* spi1_miso_m1 */
.bank_num = 2,
.pin = 4,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 9) | BIT(9),
}, {
/* mac_rxd0_m0 */
.bank_num = 1,
.pin = 20,
.func = 3,
.route_offset = 0x314,
.route_val = BIT(16 + 14),
}, {
/* mac_rxd0_m1 */
.bank_num = 4,
.pin = 2,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 14) | BIT(14),
}, {
/* uart3_rx */
.bank_num = 3,
.pin = 12,
.func = 4,
.route_offset = 0x314,
.route_val = BIT(16 + 15),
}, {
/* uart3_rx_m1 */
.bank_num = 0,
.pin = 17,
.func = 3,
.route_offset = 0x314,
.route_val = BIT(16 + 15) | BIT(15),
},
};
static int rk3308_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
int iomux_num = (pin / 8);
struct regmap *regmap;
int reg, ret, mask, mux_type;
u8 bit;
u32 data;
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
? priv->regmap_pmu : priv->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
if (bank->recalced_mask & BIT(pin))
rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
data = (mask << (bit + 16));
data |= (mux & mask) << bit;
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3308_PULL_OFFSET 0xa0
static void rk3308_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3308_PULL_OFFSET;
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
}
static int rk3308_set_pull(struct rockchip_pin_bank *bank,
int pin_num, int pull)
{
struct regmap *regmap;
int reg, ret;
u8 bit, type;
u32 data;
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
return -ENOTSUPP;
rk3308_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
type = bank->pull_type[pin_num / 8];
ret = rockchip_translate_pull_value(type, pull);
if (ret < 0) {
debug("unsupported pull setting %d\n", pull);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3308_DRV_GRF_OFFSET 0x100
static void rk3308_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3308_DRV_GRF_OFFSET;
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG);
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
}
static int rk3308_set_drive(struct rockchip_pin_bank *bank,
int pin_num, int strength)
{
struct regmap *regmap;
int reg, ret;
u32 data;
u8 bit;
int type = bank->drv[pin_num / 8].drv_type;
rk3308_calc_drv_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
ret = rockchip_translate_drive_value(type, strength);
if (ret < 0) {
debug("unsupported driver strength %d\n", strength);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3308_SCHMITT_PINS_PER_REG 8
#define RK3308_SCHMITT_BANK_STRIDE 16
#define RK3308_SCHMITT_GRF_OFFSET 0x1a0
static int rk3308_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3308_SCHMITT_GRF_OFFSET;
*reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE;
*reg += ((pin_num / RK3308_SCHMITT_PINS_PER_REG) * 4);
*bit = pin_num % RK3308_SCHMITT_PINS_PER_REG;
return 0;
}
static int rk3308_set_schmitt(struct rockchip_pin_bank *bank,
int pin_num, int enable)
{
struct regmap *regmap;
int reg;
u8 bit;
u32 data;
rk3308_calc_schmitt_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
/* enable the write to the equivalent lower bits */
data = BIT(bit + 16) | (enable << bit);
return regmap_write(regmap, reg, data);
}
static struct rockchip_pin_bank rk3308_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
};
static struct rockchip_pin_ctrl rk3308_pin_ctrl = {
.pin_banks = rk3308_pin_banks,
.nr_banks = ARRAY_SIZE(rk3308_pin_banks),
.grf_mux_offset = 0x0,
.iomux_recalced = rk3308_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rk3308_mux_recalced_data),
.iomux_routes = rk3308_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3308_mux_route_data),
.set_mux = rk3308_set_mux,
.set_drive = rk3308_set_drive,
.set_pull = rk3308_set_pull,
.set_schmitt = rk3308_set_schmitt,
};
static const struct udevice_id rk3308_pinctrl_ids[] = {
{
.compatible = "rockchip,rk3308-pinctrl",
.data = (ulong)&rk3308_pin_ctrl
},
{ }
};
U_BOOT_DRIVER(pinctrl_rk3308) = {
.name = "rockchip_rk3308_pinctrl",
.id = UCLASS_PINCTRL,
.of_match = rk3308_pinctrl_ids,
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
.ops = &rockchip_pinctrl_ops,
#if CONFIG_IS_ENABLED(OF_REAL)
.bind = dm_scan_fdt_dev,
#endif
.probe = rockchip_pinctrl_probe,
};