mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
32b2ea9818
Some pins in rockchip are routed via Top GRF and PMU GRF instead of direct regmap. Add support to handle all these routing paths so that the SoC pinctrl drivers will use them accordingly. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
203 lines
4.3 KiB
C
203 lines
4.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
|
|
{
|
|
.num = 2,
|
|
.pin = 20,
|
|
.reg = 0xe8,
|
|
.bit = 0,
|
|
.mask = 0x7
|
|
}, {
|
|
.num = 2,
|
|
.pin = 21,
|
|
.reg = 0xe8,
|
|
.bit = 4,
|
|
.mask = 0x7
|
|
}, {
|
|
.num = 2,
|
|
.pin = 22,
|
|
.reg = 0xe8,
|
|
.bit = 8,
|
|
.mask = 0x7
|
|
}, {
|
|
.num = 2,
|
|
.pin = 23,
|
|
.reg = 0xe8,
|
|
.bit = 12,
|
|
.mask = 0x7
|
|
}, {
|
|
.num = 2,
|
|
.pin = 24,
|
|
.reg = 0xd4,
|
|
.bit = 12,
|
|
.mask = 0x7
|
|
},
|
|
};
|
|
|
|
static struct rockchip_mux_route_data rk3128_mux_route_data[] = {
|
|
{
|
|
/* spi-0 */
|
|
.bank_num = 1,
|
|
.pin = 10,
|
|
.func = 1,
|
|
.route_offset = 0x144,
|
|
.route_val = BIT(16 + 3) | BIT(16 + 4),
|
|
}, {
|
|
/* spi-1 */
|
|
.bank_num = 1,
|
|
.pin = 27,
|
|
.func = 3,
|
|
.route_offset = 0x144,
|
|
.route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(3),
|
|
}, {
|
|
/* spi-2 */
|
|
.bank_num = 0,
|
|
.pin = 13,
|
|
.func = 2,
|
|
.route_offset = 0x144,
|
|
.route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(4),
|
|
}, {
|
|
/* i2s-0 */
|
|
.bank_num = 1,
|
|
.pin = 5,
|
|
.func = 1,
|
|
.route_offset = 0x144,
|
|
.route_val = BIT(16 + 5),
|
|
}, {
|
|
/* i2s-1 */
|
|
.bank_num = 0,
|
|
.pin = 14,
|
|
.func = 1,
|
|
.route_offset = 0x144,
|
|
.route_val = BIT(16 + 5) | BIT(5),
|
|
}, {
|
|
/* emmc-0 */
|
|
.bank_num = 1,
|
|
.pin = 22,
|
|
.func = 2,
|
|
.route_offset = 0x144,
|
|
.route_val = BIT(16 + 6),
|
|
}, {
|
|
/* emmc-1 */
|
|
.bank_num = 2,
|
|
.pin = 4,
|
|
.func = 2,
|
|
.route_offset = 0x144,
|
|
.route_val = BIT(16 + 6) | BIT(6),
|
|
},
|
|
};
|
|
|
|
static int rk3128_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
if (bank->recalced_mask & BIT(pin))
|
|
rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask);
|
|
|
|
data = (mask << (bit + 16));
|
|
data |= (mux & mask) << bit;
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3128_PULL_OFFSET 0x118
|
|
#define RK3128_PULL_PINS_PER_REG 16
|
|
#define RK3128_PULL_BANK_STRIDE 8
|
|
|
|
static void rk3128_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3128_PULL_OFFSET;
|
|
*reg += bank->bank_num * RK3128_PULL_BANK_STRIDE;
|
|
*reg += ((pin_num / RK3128_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RK3128_PULL_PINS_PER_REG;
|
|
}
|
|
|
|
static int rk3128_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT &&
|
|
pull != PIN_CONFIG_BIAS_DISABLE)
|
|
return -ENOTSUPP;
|
|
|
|
rk3128_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
data = BIT(bit + 16);
|
|
if (pull == PIN_CONFIG_BIAS_DISABLE)
|
|
data |= BIT(bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct rockchip_pin_bank rk3128_pin_banks[] = {
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl rk3128_pin_ctrl = {
|
|
.pin_banks = rk3128_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(rk3128_pin_banks),
|
|
.grf_mux_offset = 0xa8,
|
|
.iomux_recalced = rk3128_mux_recalced_data,
|
|
.niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data),
|
|
.iomux_routes = rk3128_mux_route_data,
|
|
.niomux_routes = ARRAY_SIZE(rk3128_mux_route_data),
|
|
.set_mux = rk3128_set_mux,
|
|
.set_pull = rk3128_set_pull,
|
|
};
|
|
|
|
static const struct udevice_id rk3128_pinctrl_ids[] = {
|
|
{ .compatible = "rockchip,rk3128-pinctrl",
|
|
.data = (ulong)&rk3128_pin_ctrl },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pinctrl_rk3128) = {
|
|
.name = "pinctrl_rk3128",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = rk3128_pinctrl_ids,
|
|
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|