u-boot/configs/da850evm_nand_defconfig
Samuel Holland f4917b4933 usb: ohci: Use a flexible array member for portstatus
The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-11-03 23:24:09 +01:00

118 lines
3.1 KiB
Text

CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_DAVINCI=y
CONFIG_TEXT_BASE=0xc1080000
CONFIG_SYS_MALLOC_LEN=0x110000
CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_TARGET_DA850EVM=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x0
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="da850-evm"
CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_LTO=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0000f20
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run envboot; run mmcboot; "
CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CLOCKS=y
CONFIG_SPL_PAD_TO=0x8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0xc0000000
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x8001ff00
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0f70000
CONFIG_SYS_SPL_MALLOC_SIZE=0x110000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=1050
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MX_CYCLIC=y
CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPT is not set
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_DNS2=y
# CONFIG_CMD_TIME is not set
# CONFIG_CMD_EXT4 is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand512"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand512:128k(u-boot env),512k(u-boot),128k(spl-os),8m(kernel),-(rootfs)"
CONFIG_CMD_DIAG=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_DAVINCI=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_PHY=y
CONFIG_PHY_DA8XX_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_DAVINCI_SPI=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_DA8XX=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_DA8XX=y
CONFIG_USB_MUSB_PIO_ONLY=y
CONFIG_USB_STORAGE=y
# CONFIG_FAT_WRITE is not set