mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
538ef96771
Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level controller hook up to USB core layer. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
127 lines
3.3 KiB
C
127 lines
3.3 KiB
C
/*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* Parts are shamelessly stolen from various TI sources, original copyright
|
|
* follows:
|
|
* -----------------------------------------------------------------
|
|
*
|
|
* Copyright (C) 2004 Texas Instruments.
|
|
*
|
|
* ----------------------------------------------------------------------------
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/emac_defs.h>
|
|
#include "../common/psc.h"
|
|
#include "../common/misc.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int board_init(void)
|
|
{
|
|
/* arch number of the board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
|
|
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
|
|
|
|
/* Workaround for TMS320DM6446 errata 1.3.22 */
|
|
REG(PSC_SILVER_BULLET) = 0;
|
|
|
|
/* Power on required peripherals */
|
|
lpsc_on(DAVINCI_LPSC_EMAC);
|
|
lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
|
|
lpsc_on(DAVINCI_LPSC_MDIO);
|
|
lpsc_on(DAVINCI_LPSC_I2C);
|
|
lpsc_on(DAVINCI_LPSC_UART0);
|
|
lpsc_on(DAVINCI_LPSC_TIMER1);
|
|
lpsc_on(DAVINCI_LPSC_GPIO);
|
|
lpsc_on(DAVINCI_LPSC_USB);
|
|
|
|
#if !defined(CONFIG_SYS_USE_DSPLINK)
|
|
/* Powerup the DSP */
|
|
dsp_on();
|
|
#endif /* CONFIG_SYS_USE_DSPLINK */
|
|
|
|
/* Bringup UART0 out of reset */
|
|
REG(UART0_PWREMU_MGMT) = 0x0000e003;
|
|
|
|
/* Enable GIO3.3V cells used for EMAC */
|
|
REG(VDD3P3V_PWDN) = 0;
|
|
|
|
/* Enable UART0 MUX lines */
|
|
REG(PINMUX1) |= 1;
|
|
|
|
/* Enable EMAC and AEMIF pins */
|
|
REG(PINMUX0) = 0x80000c1f;
|
|
|
|
/* Enable I2C pin Mux */
|
|
REG(PINMUX1) |= (1 << 7);
|
|
|
|
/* Set the Bus Priority Register to appropriate value */
|
|
REG(VBPR) = 0x20;
|
|
|
|
timer_init();
|
|
|
|
return(0);
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
uint8_t video_mode;
|
|
uint8_t eeprom_enetaddr[6];
|
|
|
|
dv_display_clk_infos();
|
|
|
|
/* Read Ethernet MAC address from EEPROM if available. */
|
|
if (dvevm_read_mac_address(eeprom_enetaddr))
|
|
dv_configure_mac_address(eeprom_enetaddr);
|
|
|
|
if (!eth_hw_init())
|
|
printf("ethernet init failed!\n");
|
|
|
|
i2c_read(0x39, 0x00, 1, &video_mode, 1);
|
|
|
|
setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc"));
|
|
|
|
return(0);
|
|
}
|
|
|
|
#ifdef CONFIG_USB_DAVINCI
|
|
|
|
/* IO Expander I2C address and USB VBUS enable mask */
|
|
#define IOEXP_I2C_ADDR 0x3A
|
|
#define IOEXP_VBUSEN_MASK 1
|
|
|
|
/*
|
|
* This function enables USB VBUS by writting to IO expander using I2C.
|
|
* Note that the I2C is already initialized at this stage. This
|
|
* function is used by davinci specific USB wrapper code.
|
|
*/
|
|
void enable_vbus(void)
|
|
{
|
|
uchar data; /* IO Expander data to enable VBUS */
|
|
|
|
/* Write to IO expander to enable VBUS */
|
|
i2c_read(IOEXP_I2C_ADDR, 0, 0, &data, 1);
|
|
data &= ~IOEXP_VBUSEN_MASK;
|
|
i2c_write(IOEXP_I2C_ADDR, 0, 0, &data, 1);
|
|
}
|
|
#endif
|
|
|